Enigma2 and diseqc switch problem

[kartal]

hello all,
my diseqc switch not work with enigma2 image on my 9000Hd receiver but the same switch work fine in other images (NLB, Sifteam ...).

I try all mode for configuration for diseqc but only first sat connected on diseqc work.
Help please.

 

[HardDisk]

It's a known bug, will be resolved.

 

[ullerdk]

It's a known bug, will be resolved.

OK, then THAT is why my E2 can find all channels on 1W but only a very few on 5E on my IP9000. I have now struggled with this for weeks, so is it possible to read a "E2 known bugs list" anywhere?

 

[ullerdk]

OK, then THAT is why my E2 can find all channels on 1W but only a very few on 5E on my IP9000. I have now struggled with this for weeks, so is it possible to read a "E2 known bugs list" anywhere?

According to release notes E2 v4.2.0 should have this irritation bug fixed, but I can't find anywhere to download it.

 

[tamazgha2003]

i have tested this version on 91 hd and disecq1.2 is not fixed
because the snr and agc readings are not working,so you dont know if the rotor is turning or not and you dont get a sat lock
only disecq 1.1 switch is fixed in this version
until the snr and agc readings are not fixed in positioner setup we can not use this version with disecq rotor

 

[ullerdk]

But it now works with a diseqc switch

 

[fikos67]

with a 910 and a 4 to 1 disecq it works fine but with the 9000 nothing , sow lets wait for the bug to be fixed .

 

[kartal]

with a 910 and a 4 to 1 disecq it works fine but with the 9000 nothing , sow lets wait for the bug to be fixed .

yes, same for me, not work in my 9000HD. Waiting for bug fix.

 

[ullerdk]

with a 910 and a 4 to 1 disecq it works fine but with the 9000 nothing , sow lets wait for the bug to be fixed .

Well, I have a 9000HD where it now works, but as I wrote I only have a diseqc switch, not a rotor.

 

[Alan02]

Well, I have a 9000HD where it now works, but as I wrote I only have a diseqc switch, not a rotor.

how did you solve this issue? ı have AAF HOT SUMMER image now and ı have the same problem. How to configure 4 LNBs. ı am choosing simple configuration and ıt does not switch properly. I have 4 LNBs.

A-Turksat
B-Hotbird
C-Astra 19
D-Eutelsat w3

in NLB or DGS works fine but not in AAF ??? Help

 

[Alan02]

how did you solve this issue? ı have AAF HOT SUMMER image now and ı have the same problem. How to configure 4 LNBs. ı am choosing simple configuration and ıt does not switch properly. I have 4 LNBs.

A-Turksat
B-Hotbird
C-Astra 19
D-Eutelsat w3

in NLB or DGS works fine but not in AAF ??? Help

I got it worked. My cables were loose the basic setup is enough for 4 LNBs however if you want to setup more than 4 LNBs just use below cnfiguration:

configuration mode = advanced
choose satellite you want
LNB = LNB 1
Priority = Auto
LOF = Universal LNB
Voltage Mode = Polorisation
Increased Voltage = No
Tone Mode = Band
DisecQ Mode = 1.2
Toneburst = None
Commited DISEqC command = none
Fast DISEqC = Yes
sequence repeat = No
Command Order = commited, toneburst
Uncommitted DISEqC command = none
DISEqC repeats = none
Longitude - put in your long
Latitude = put in your Latitude
Use usals for this sat = yes