DVB-T and DVB_C stick working on Vu duo

Status
Not open for further replies.

elgeneral

Registered
Messages
7,811
DVB-T and DVB_C stick working on Vu duo!

Originally Posted by labascal
Hello,

Just to comment I own a Sundtek USB DVB-C and DVB-T stick and after the VU drivers update from 1308 and the fix of vtuner inertaface finally I managed to use it on my Vu duo. This is a sitck that works both for DVB-C and DVB-T. Find below a small how to:

Required files:
/opt/bin/mediasrv
/opt/bin/mediasrv
/opt/kmod/usbkhelper-vuplus.ko

Not required but usefull configuring script:
/opt/bin/sun_dvb.sh

Also scitpts for launching enclosed and a ppanel to makes things easy enclosed:

On my trials both dvb-c and dvb-t works correctly, however I was not able to do an automatic scan on dvb-c (not know if it is my problem or sundteck) but it works with imported channel list. DVB-T no problem.

Also I sometimes have the feeling of audio sync delay, but I can say that it basically works great.

Hope it is usefull.

Hello,

ipk enclosed. All the drivers are from sundtek, not mine, and the scirpts based on info taken from the inet and the ppanel based on the info from pli wiki. Obviously only works with sundtek sticks.

I understand that there is no probelm to post them. In fact the specific file needed for the VU usbkhelper-vuplus.ko is open source acording to sundetek support page.

Best regards.

gracias a labascal
 

elgeneral

Registered
Messages
7,811
for VTI gracias a scope34

vt-dvb-core.ko
dvb-usb.ko

und driver specific ones like dvb-usb-*.ko and also firmware.

And attached a shellscript and usbtuner Binary, so have should have all thing.
 

elgeneral

Registered
Messages
7,811
new version drivers sundtek

September 09, 2010

Upcoming driver release


* Improved networking support
* Settopbox Support for Dreambox 500HD/800HD/8000, VU+
* DVB-T, DVB-C Firmwareupdate (using the latest available Firmware 2010/Aug/19)
- the firmwareupdate fixes signal drops after standby
- SECAM-L also works properly with the new firmware version
* WNDR3700 Router support (DD-WRT and OpenWRT) - MIPS Support
* WDTV Live Support (IPTV Streaming Server)
* Western Digital MyBook NAS Support ARM
* new commands for starting/stopping the driver (only for PCs not for settopboxes yet)
- /opt/bin/mediaclient --start
- /opt/bin/mediaclient --shutdown (puts all the components into standby and shuts down the driver)
* DVB-S/S2 Support
* improved support for USB bulk transfers
* support for Darkice/mp3 Streaming
* BER value is displayed now
* SNR value is also displayed, however this value is only the same as the signal strength
* added libmcsimple.so in order to directly access the driver framework.

----

TODO before this driver turns to the next stable version:
* ATSC/NTSC firmware update (Stand 19/August/2010)
* more tests with various analog TV standards.
 

tani1

Staff member
Super Moderator
Messages
17,767
Sundtek USB DVB-C and DVB-T Update

Update sundtek

11-10-10

Changelog:
  • *Fix for Network Disconnect DVB filter
  • * Fix 32bit mmap support
  • * ARM uclib added build
  • * Driver is started automatically - mount command has not already started
  • * Log shows information about USB 1.1 and (it is supported only USB 2.0)
  • * Automatically start the network driver on the Dreambox is possible with this version
  • Fix FM Radio for gstreamer (OSS Update)
  • * Fix device detection Seagate DockStar
  • * Fix Bulk Transfer - (located in the delivery of the stick in the Isochronous mode - is used only for bulk Problemfaellen) this time a final decision on different kernel versions across
  • * Fix MythTV with Bulk Transfer
  • * Fix symbol rate values
  • * Support for new tuner chip added
  • * New drivers demodulator for ATSC / QAM added
  • * Mcsimple C API supports now also scan to network, DVB devices
  • * Fix Wine Support (32bit)
  • * Support for new devices MiniPCIe ATSC /
  • * Direct access to single ICs (especially to make specific measurements can be - signal measurements for special applications).
  • * Support for DMX_SET_BUFFER_SIZE / dev/dvb/adapterN/dvr0 interfaces (bug fix for gstreamer DVB streaming)
  • Roadmap upcoming changes:
  • * Support for new devices DVB-C/T/Hybrid
  • * Support alternative remote controls
  • * Terratec Hybrid XS FM Support (em2882 - cx25843 - xc5000), Analog TV, FM radio, DVB-T
  • - This device supports Terratec is because a business customer has been mixed in use with our devices.
  • - There are no other products are supported by Terratec.
  • * Virtual Windows DVB drivers, currently, the performance between Linux - Windows improved, etc.
 

elgeneral

Registered
Messages
7,811
update 1-11-10

Changelog:
* Fix Netzwerk Disconnect fuer DVB Filter
* Fix 32bit mmap Support
* ARM uclib build hinzugefuegt
* Treiber wird automatisch gestartet durch --mount Befehl sofern noch nicht gestartet
* Logfile zeigt Informationen ueber USB 1.1 an (es wird nur USB 2.0 unterstuetzt)
* automatisches Starten des Netzwerktreibers auf der Dreambox ist mit dieser Version moeglich
* Fix FM Radio fuer gstreamer (OSS Update)
* Fix Seagate Dockstar Geraeteerkennung
* Fix BULK Transfer - diesmal endgueltig ueber verschiedene Kernelversionen hinweg (bei der Auslieferung befindet sich der Stick im Isochronous Modus - Bulk wird nur bei Problemfaellen verwendet)
* Fix MythTV mit Bulk Transfer
* Fix Symbolrate Werte
* Support fuer neuen Tunerchip hinzugefuegt
* Neuen Demodulator Treiber fuer ATSC/QAM hinzugefuegt
* mcsimple C API unterstuetzt nun auch scannen nach Netzwerk DVB Geraeten
* Fix Wine Support (32bit)
* Support fuer neue ATSC Geraete/MiniPCIe
* Direkten Zugriff auf alle einzelnen ICs (besonders um spezielle Messungen vornehmen zu koennen - Signalmessungen fuer Spezialanwendungen).
* DMX_SET_BUFFER_SIZE Unterstuetzung fuer /dev/dvb/adapterN/dvr0 Schnittstellen (Bugfix fuer gstreamer/DVB Streaming)
* Support fuer neue DVB-C/T/Hybrid Geraete (Neuer Tuner/Demod/USB Bridge)
* Fix Standby auf Seagate Dockstar wenn das Geraet im Netzwerkmodus betrieben wird
* Unterstuetzung fuer verfuegbare Sundtek SkyTV Ultimate DVB-S/S2 USB Stick
* Synchronisierungsbugfix fuer vdr-live
* Fix hotplug Disconnect sofern das Beschleunigungsmodul verwendet wird (welches nur fuer Embedded Systeme eingesetzt wird, z.b Dreambox - wobei die Dreambox leider in der Herstellerfirmware auch Fehler hat welche die Dreambox bei einem Abstecken des Sticks waehrend der Benutzung abstuerzen laesst -- praktisch kaum relevant)
* DVB-S(/S2) wurde auf der Dreambox getestet (S2 - experimenteller Support fuer die Dreambox).
 

elgeneral

Registered
Messages
7,811
Update 29-11-2010

Changelog:
* Fix Netzwerk Disconnect fuer DVB Filter
* Fix 32bit mmap Support
* ARM uclib build hinzugefuegt
* Treiber wird automatisch gestartet durch --mount Befehl sofern noch nicht gestartet
* Logfile zeigt Informationen ueber USB 1.1 an (es wird nur USB 2.0 unterstuetzt)
* automatisches Starten des Netzwerktreibers auf der Dreambox ist mit dieser Version moeglich
* Fix FM Radio fuer gstreamer (OSS Update)
* Fix Seagate Dockstar Geraeteerkennung
* Fix BULK Transfer - diesmal endgueltig ueber verschiedene Kernelversionen hinweg (bei der Auslieferung befindet sich der Stick im Isochronous Modus - Bulk wird nur bei Problemfaellen verwendet)
* Fix MythTV mit Bulk Transfer
* Fix Symbolrate Werte
* Support fuer neuen Tunerchip hinzugefuegt
* Neuen Demodulator Treiber fuer ATSC/QAM hinzugefuegt
* mcsimple C API unterstuetzt nun auch scannen nach Netzwerk DVB Geraeten
* Fix Wine Support (32bit)
* Support fuer neue ATSC Geraete/MiniPCIe
* Direkten Zugriff auf alle einzelnen ICs (besonders um spezielle Messungen vornehmen zu koennen - Signalmessungen fuer Spezialanwendungen).
* DMX_SET_BUFFER_SIZE Unterstuetzung fuer /dev/dvb/adapterN/dvr0 Schnittstellen (Bugfix fuer gstreamer/DVB Streaming)
* Support fuer neue DVB-C/T/Hybrid Geraete (Neuer Tuner/Demod/USB Bridge)
* Fix Standby auf Seagate Dockstar wenn das Geraet im Netzwerkmodus betrieben wird
* Unterstuetzung fuer verfuegbare Sundtek SkyTV Ultimate DVB-S/S2 USB Stick
* Synchronisierungsbugfix fuer vdr-live
* Fix hotplug Disconnect sofern das Beschleunigungsmodul verwendet wird (welches nur fuer Embedded Systeme eingesetzt wird, z.b Dreambox - wobei die Dreambox leider in der Herstellerfirmware auch Fehler hat welche die Dreambox bei einem Abstecken des Sticks waehrend der Benutzung abstuerzen laesst -- praktisch kaum relevant)
* DVB-S(/S2) wurde auf der Dreambox getestet (S2 - experimenteller Support fuer die Dreambox).
* Ausfuehrbare Skripte in /etc/sundtek/ werden automatisch gestartet.
* Neue DVB-C/T und DVB-C/T/analog TV Geraete welche wir anbieten werden ab diesem Treiber offiziell unterstuetzt
* poll update fuer MythTV
* Unterstützung für Umschalten auf Bulk Support für neue Geräte
* Dreambox 2.6.18-7.4 und DM800SE Support hinzugefügt
 
Status
Not open for further replies.
Top