Dreambox,and other stb's with CCcam & constant.cw keys ..A How To Guide =>

[barney115]

OK Since i get asked this on a regular basis
not only for Tennis Feeds but even for other Feeds aswell
ive decided to make this handy Guide which may help some users with keys using CCcam Emu and constant.cw file
the same procedure should work with oscam aswell im sure ..

So here is guide for today's 10East Tennis Feeds in Constant.cw key format ..
how i do this on My Dm800SE HD with Edg Nemesis image is on remote select Feed channel then Blue button then Green button [ show Service info ] then Green Button [ PIDS ]
and ok
Now we can see PMT AND SID required for CCcam constant.cw format
putting SID First Then PMT PID Last as highlighted below....

2600:000000:0002:005e:1FFF::xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx ;Content
2600:000000:0003:00e6:1FFF::xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx ;NEWS
2600:000000:0001:00e4:1FFF::xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx ;World Feed
2600:000000:0004:00e7:1FFF::xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx ;SUPP A
2600:000000:0005:00e8:1FFF::xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx ;SUPP B


as per Forum Rules no keys are permitted ..
so You can Copy/Paste today's keys in the correct lines where i marked xx xx etc..etc..

KEYS Found in this Thread Thanks to Sat-Universe Team members Onn1972,mixman.rs,mauricelugher and others etc..etc.. [RESPECT] :thum:

=> http://www.sat-universe.com/showthread.php?t=252812&page=127

This same method can be used with All feeds without Exceptions
now i'm ready can watch these 4:2:2 Tennis Feeds on 10E Via my Dm800SE HD with VLC Player And Webinferface :thum: :thum:

PS. I Attached below my own CCcam constant.cw file just as a guide
for eductional purposes :thum:

 

[AbuHaya]

how i do this on My Dm800SE HD with Edg Nemesis image is on remote select Feed channel then Blue button then Green button [ show Service info ] then Green Button [ PIDS ]
and ok

or go to IP Receivers = Current will see all Service info
also best run it with emu used oscam.key it not Conflict with key

F [B]SidVpid [/B]00 [B]CW[/B](no spece) ;anyname