dreambox 500s motorized help

mongar

Registered
Messages
115
I stored 4 satellites but when I use one satellite the motor doesn't move to another satellite. I don't know how to set up the motor. please I need help.
 

guli

Registered
Messages
375
The dm500s is not built to drive a motor mate it is a no go area .
 

Brummie

Staff member
Administrator
Messages
5,794
you can use a DM500 motorised i used mine for years using a
DiSEqC motor
 

vinceben

Registered
Messages
7
There have been reports of problems with long cable runs and problems with Stab motors. I have a Stab 100 and my dm 500s cannot run the motor. Using technomate 5400 on motor now
 

mdt

VIP
Messages
905
There have been reports of problems with long cable runs and problems with Stab motors. I have a Stab 100 and my dm 500s cannot run the motor.



i have a stab 120 and my dm500s rev6 runs my motor fine with a 20 meter run of triax tx100 cable,regards mdt
 

Alex99

Registered
Messages
661
There have been reports of problems with long cable runs and problems with Stab motors. I have a Stab 100 and my dm 500s cannot run the motor. Using technomate 5400 on motor now


Go to setup - service searching - satelite configuration choice one lnb OK to him and OK to incresed voltaje , in this mode more voltaje go to Stabs motors and him working!
 
Top