Doscam chat

P

pandra

Registered
Messages
111
Hello !

Ok on official Dreambox Dm800se, tntsat Sd by emulation (and others Caid emu like 0D05,...) and also with a reel card tntsat.

Thank's !!
 
C

chris_jack

Registered
Messages
26
Real card tntsat can be read !

Hi,

I can read my tntsat-card again in my Vu+ Duo.
Thanks a lot for this.

The channels "Cherie 25", "RMC Decouverte" and "L'Equipe 21" who were left (old nano) after the change of the nano D2 02 13/15 can't be opened with Doscam V0.17.
 
C

Calokay

Registered
Messages
130
samur said:
Thanks for this good news
Click to expand...

chris_jack said:
Hi,

I can read my tntsat-card again in my Vu+ Duo.
Thanks a lot for this.

The channels "Cherie 25", "RMC Decouverte" and "L'Equipe 21" who were left (old nano) after the change of the nano D2 02 13/15 can't be opened with Doscam V0.17.
Click to expand...

The channels "Cherie 25" "RMC Decouverte" and "L'Equipe 21" go with Doscam V0.17. :thum:
 
Last edited:
K

kagami01

Registered
Messages
9
chris_jack said:
The channels "Cherie 25", "RMC Decouverte" and "L'Equipe 21" who were left (old nano) after the change of the nano D2 02 13/15 can't be opened with Doscam V0.17.
Click to expand...

There are also working. You need EC (used by old nano) und ED Key (used by new nano on SD channels) in SoftCam.Key
V 030B00 ED .....
V 030B00 EC .....

These two keys are enough for local card. If you want to use the emu, you need of course the other ones, too.

Digiturk and UPC are also working with EMU. All you need is a proper SoftCam.Key :thum:
 
C

Calokay

Registered
Messages
130
kagami01 said:
There are also working. You need EC (used by old nano) und ED Key (used by new nano on SD channels) in SoftCam.Key
V 030B00 ED .....
V 030B00 EC .....

These two keys are enough for local card. If you want to use the emu, you need of course the other ones, too.

Digiturk and UPC are also working with EMU. All you need is a proper SoftCam.Key :thum:
Click to expand...

What Softcam you as UPC and Digiturk? Can you post it? :confused:
 
K

kagami01

Registered
Messages
9
Calokay, robbyrobby: Sorry, I was too quick. UPC is not working anymore at the moment. But Digiturk is still open. Check pn.
 
C

Calokay

Registered
Messages
130
robbyrobby said:
http://www.sat-universe.com/showpost.php?p=1082402&postcount=18

Hi kagami01,

or per PM proper softcam.key/link if possible

ty
regards robby
Click to expand...

Softcam, or oscam.keys:
#

# *** ORF/ AustriaSat (19.2E) **
W 0D0504 00 A9D732F5E738E48A91C8638B12746661 ; ORF
W 0D0510 00 00006AB325E6ABF4DA47280F35294B5C ; 12.04.2013 ok
W 0D0504 06 0987CF2A611D;
W 0D0510 06 0987CF2A611D;
#
#----------------------------------------------------------------
#
# *** SkyLink (23.5E) ***
#
W 0D0304 00 000000000000000019E8F524C6C053E4 ;
W 0D0304 06 27B488348D54 ;
W 0D0308 01 000000000000000042F07BE920C7E0F3 ;
W 0D0308 06 27B488348D54 ;
#
#----------------------------------------------------------------#
# *** Digiturk (7°E) ***
W 0D00C8 00 22ECB8B24385C3B2941EF7ECC2B54A09 ;
W 0D00C8 01 C0C68655B63304085B5F722DD471FE27 ;
W 0D00C8 06 015612E8EE33 ;
#
#----------------------------------------------------------------#
# *** UPC Direct (0.8W)
#
#
#W 0D02A0 00 307249C2E6CA1BFC698C79B4C64E810C ;
#W 0D02A0 06 C4FFB330795B ; CardSystem Key
#
#----------------------------------------------------------------
# * UPC Direct (0.8°W) *
W 0D02A0 00 307249C2E6CA1BFC698C79B4C64E810C ; Active
W 0D02A0 01 FD4FD691F6A2C6992E240B8C36791284 ;
W 0D02A0 06 C4FFB330795B ;
W 0D02A0 B0 816C84602F6B10BE2BF52D0C7E9F8DD04585AF233C3E68B908329308074FBC3D97E4E352B8A0490C0E8BB7428E015792057560605284D3C489838DCB35670080 ;
W 0D02A4 00 307249C2E6CA1BFC698C79B4C64E810C ;
W 0D02A4 01 FD4FD691F6A2C6992E240B8C36791284 ;
W 0D02A4 06 C4FFB330795B ;
W 0D02A4 B0 816C84602F6B10BE2BF52D0C7E9F8DD04585AF233C3E68B908329308074FBC3D97E4E352B8A0490C0E8BB7428E015792057560605284D3C489838DCB35670080 ;
W 0D02A8 00 307249C2E6CA1BFC698C79B4C64E810C ;
W 0D02A8 01 FD4FD691F6A2C6992E240B8C36791284 ;
W 0D02A8 06 C4FFB330795B ;
W 0D02A8 B0 816C84602F6B10BE2BF52D0C7E9F8DD04585AF233C3E68B908329308074FBC3D97E4E352B8A0490C0E8BB7428E015792057560605284D3C489838DCB35670080 ;
#----------------------------------------------------------------
# * Digiturk (7°E) *
# *** Digiturk (7°E) *** for new OScam-ymod v.18-t48 ONLY!!!

W 0D00C0 00 22ECB8B24385C3B2941EF7ECC2B54A09 ;
W 0D00C0 01 C0C68655B63304085B5F722DD471FE27 ; Active
W 0D00C0 06 015612E8EE33 ;
W 0D00C0 B0 9D5F83A2D84C03F100AAF72498AD74B89995794D8F2882DD5FDE26EBB10A504E78765E4D595ED4D7202E0E002F41028BCDAF4569FE27B53F0ACF2D9063960080 ;
W 0D00C4 00 22ECB8B24385C3B2941EF7ECC2B54A09 ;
W 0D00C4 01 C0C68655B63304085B5F722DD471FE27 ;
W 0D00C4 06 015612E8EE33 ;
W 0D00C4 B0 9D5F83A2D84C03F100AAF72498AD74B89995794D8F2882DD5FDE26EBB10A504E78765E4D595ED4D7202E0E002F41028BCDAF4569FE27B53F0ACF2D9063960080 ;
W 0D00C8 00 22ECB8B24385C3B2941EF7ECC2B54A09 ;
W 0D00C8 01 C0C68655B63304085B5F722DD471FE27 ;
W 0D00C8 06 015612E8EE33 ;
W 0D00C8 B0 9D5F83A2D84C03F100AAF72498AD74B89995794D8F2882DD5FDE26EBB10A504E78765E4D595ED4D7202E0E002F41028BCDAF4569FE27B53F0ACF2D9063960080 ;
W 0D00CC 00 7B4968C4C0304830D6DE6D4C0522D688 ;
W 0D00CC 01 6E3BFC51F6E3BAF09B726B95F85D3DA1 ;
W 0D00CC 06 015612E8EE33 ;
W 0D00CC B0 9D5F83A2D84C03F100AAF72498AD74B89995794D8F2882DD5FDE26EBB10A504E78765E4D595ED4D7202E0E002F41028BCDAF4569FE27B53F0ACF2D9063960080 ;
# ------------------------------------------ #

Thanks for the info. The problem was not set reader for UPC and Digiturk ;)
oscam.server:

[reader]
label = doscam_emu
protocol = constcw
device = /etc/tuxbox/config/oscam.keys
key = 0102030405060708091011121314
services = orf-austriasat_0d05_emu,upc_0d02_emu,digiturk_0d00_emu,rai_000030_emu,csat_022610_emu,tntsat_030b00_emu,mezzo_007400_emu,viasat_softnds_090f_emu,arqiva_0d00_emu,skylink_0d03_emu,globo_00C102_emu,
ident = 0500:022610,030B00;0D05:000010;0D05:000004;0D03:000004,000008;0D02:0000A0;0D00:000020;0D00:000030;0D00:0000C0;0D00:0000C8;1801:000000,00C102;0100:000030;090F:000000;2600:000000;0100:00006A
group = 1
audisabled = 1
 
Last edited:
K

kagami01

Registered
Messages
9
You don't need an emu reader in V0.17 anymore. It's working out of the box and pretty fast. But if you configure an emu reader yourself, you disable the "out of the box" functionality. Thats why it wasn't working with your configuration mistake.

edit: Without config DOSCam expects the file "SoftCam.Key" in the default configuration path.
 
Last edited:
S

[Sly]

Registered
Messages
5
"Out of the box" functionality is not working for me on DM800SE with OpenPLi 4.0. I tried every combination.

By the way welcome back on other platforms. Will you sync with latest original oscam? and even add Modern WebIF? If yes than it would be the "perfect" EMU.
 
You must log in or register to reply here.
Top