Waarschijnlijk een instelling op jouw box die niet goed staat.@satpong... Failback tuner werkt nog steeds ( dit werkte ook al sinds een tijdje niet in jou eerdere images niet kun je hier even naar kijken)
groet, Bigsat
Correctie, zijn beide het IP adres van externe ontvanger (box waarvan de zenders moeten komen)Fallback externe tuner =
Locatie externe ontvanger =
config.usage.remote_fallback=http://192.168.1.102:8001
config.usage.remote_fallback_alternative=true
config.usage.remote_fallback_atsc=http://192.168.1.102:8001
config.usage.remote_fallback_dvb_c=http://192.168.1.102:8001
config.usage.remote_fallback_dvb_t=http://192.168.1.102:8001
config.usage.remote_fallback_enabled=true
config.usage.remote_fallback_extension_menu=true
config.usage.remote_fallback_external_timer=true
config.usage.remote_fallback_import=channels_epg
config.usage.remote_fallback_import_restart=true
config.usage.remote_fallback_import_standby=true
config.usage.remote_fallback_import_url=http://dm7080.local:8001
config.usage.remote_fallback_nok=true
config.usage.remote_fallback_ok=true
Thanks for your work mate!openPLi (8.1 and above) does not require a CI+helper plugin
Just add param & certificates to ciplus folder
(same certificates as enigma2-plugin-systemplugins-ciplushelper 5.3-r1)
Already included in this images
---------------------------------------------------------------------------------------------------
I have some questions about current image (without adjustments)
I can't test it myself because I don't have a CI+ module and I don't have a satellite dish
Does this still work with current image?
- CI plus
- satellite blindscan
- emu 39.0°E (ERT+DIGEA)
- BBC-SATBACK 27.5°W
- abertis 30.0°W
Thanks for testing
Hello and thank you for the message.Give me an example of such a stream so I can check it.
I haven't had time to adjust the streams bouquets yet.
Many streams may not have the correct url anymore.
Some streams work better with ServiceApp exteplayer3
Change stream in your settings list bouquet from #SERVICE 4097 to #SERVICE 5002
(other servicetypes are #SERVICE 1 and #SERVICE 5001)
Thanks for your work mate!
After testing your image...
- satellite blindscan is working but to get all channels or feeds is necessary make twice scans
- emu 39.0°E (ERT+DIGEA) works good
- BBC-SATBACK 27.5°W NOT works with error (Service not found! SID not found in PAT)
- abertis 30.0°W just works two channels, all others black screen with error (Service not found! SID not found in PAT)
try also with streamlinkHello and thank you for the message.
The link are with my ISP BOX and I think you can't verify them.
example: #SERVICE 4097:0:1:494:0:0:0:0:0:0:rtsp%3a//mafreebox.freebox.fr/fbxtv_pub/stream?namespace=1&service=283:Fr3 Alpes
with OpenPli it doesn't work and with the DreamOS is working well
So it would be great for me if it could be ok with OpenPli because it's really a great image.
thanks in advance.
I will try to put 5002. I don't try this... Will come back to tell you if ok or no...
Thanks
I'll see if I can change anything.
DreamOS is Python2. Does it work with other Python2 openimages?
For blindscan I make allways on 5 position (higher)
Thanks for your test.
Without a satellite dish it is a bit difficult for me to set everything properly.
- blindscan - try higher Accuracy
- BBC-SATBACK 27.5°W - lamedb is not modified - in the past it worked with dvbsnoop + oscam.dvbapi + oscam.conf pmt_mode = 6
Can you test it again by zapping first to 5SELECT (only this PID's has been added to lamedb) then to the next channels ?
- abertis 30.0°W - that means astra-sm does work. I just need to edit the channel list.
Thanks again
Yes, extra audio and subtitles works well.blindscan - try filter 2° or 3°
I can't change much about blindscan. It works but not 100% yet.
----------------------------------------------
Thanks for the feedback
This way without modifying lamedb (27.5°W) extra audio and subtitles should work too?
Will try with a python2 OpenPli this week and will tell you.
thank you
PY
Abertis chan work very well.Thanks for your work mate!
After testing your image...
- satellite blindscan is working but to get all channels or feeds is necessary make twice scans
- emu 39.0°E (ERT+DIGEA) works good
- BBC-SATBACK 27.5°W NOT works with error (Service not found! SID not found in PAT)
- abertis 30.0°W just works two channels, all others black screen with error (Service not found! SID not found in PAT)
Thanks for confirming abertis works.Abertis chan work very well.
perhaps you should add the new biss key for pid 801.