dm800se sim A8P

[voie]

pls help with flashing dm800se sim2.10 to new sim A8P,it dont want flashing and i get just eer1:no ca found
i use sunray-flashup,and i dont get any result

 

[pirsquared8]

1. What image did you have previously that was working and

2. what image type and name did you flash with to get this no CA error?

 

[Brummie]

just make sure you flash any original image

here is the tutorial http://www.sat-universe.com/showthread.php?t=211783

 

[GONZALES]

Yet it can be simpler just flashing mode internet write it some how one wishes the original image with oe 2.0, after uploading does not reboot but excluded from the current, unscrew klape, replace sim, close the hatch, fire up the tuner and image in August odpali.sam I did for the first together, and since then the tuner as org.

 

[Brummie]

he has a NO CA ERROR which he cannot do anything until he gets rid of that because it will not boot

if he goes by that tutorial his box should be back up and running in 10 mins

 

[Ferret]

If you have the miniflashup button on the rear as some do.

Just power down hold the miniflashup button in and keep it held in and power up while still keeping the button pressed in till a IP is displayed on front screen.

Use that in your browser to flash a genuine image.

 

[voie]

thanks for help,it works now for me,i did flash it first with a8p image when sim2.1 was inside,then i did change the sim card inside with sim a8p,it works perfect now.