DM800se Scan Problem

[Ferret]

Could be the LNB then have you not got a spare to try ?

You are setup in simple mode yeah ?

 

[badawiDM]

No but I can buy one if you think its the LNB and not the tuner.
I have the Titanium 0.1 dB Universal single LNB from Smart. with the following specs:
Input:
Low Band: 10.7 ~ 11.7 Ghz
High Band: 11.7 ~ 12.75Ghz (so the threshold is 11.7Ghz)
L.O. Frequency:
Low Band: 9.75Ghz
High Band: 10.6Ghz

I have this entered manually in the tuner setting plus 'Voltage Mode = Polarization' and 'Tone mode = Band'. Although I wasnt sure about the tone mode so I tried all possible options for it and doesnt make a difference to this problem.

 

[Ferret]

I'm not saying it is LNB 100% im just wondering if yours is switching to high band so if you had a spare it would be easy to check.

This is just eliminating all the probables.

 

[badawiDM]

I will buy one tonight, try it and let you know of the results. Thanks a lot.

 

[badawiDM]

Hi guys, I have exchanged my LNB with a new one. It was the source of the problem. This time I replaced it with a twin monoblock universal LNB and Astra and Hotbird are working perfectly. Thanks guys for you help. I wouldn't hesitate to help any of you anytime. you are the best.

 

[Ferret]

Pleased we got there in the end.

 

[badawiDM]

Pleased we got there in the end.

Thanks Ferret!

 

[Masarus]

Great i will also try a new LNB maby it fix my problems 2