Sim2-DM800SE-Newnigma2 LEAN v4.0.11 SIM2 #84d Jasper
Clean, no changes.
Sim2
SSL84d
Enigma2: 2014-06-24-tarball (thx ramiMAHER)
#########################################################################################
Webinterface is working.
Teletext is working.
#########################################################################################
Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)
#########################################################################################
No WLAN driver included (this is a feature of Newnigma Lean image):
The following drivers are available on the online feed:
Open a Telnet session to install or use Newnigma2 Services/Softwaremanager/Online Installation/show all packages to install:
opkg install kernel-module-carl9170
opkg install kernel-module-rt2800usb
opkg install kernel-module-rt73usb
opkg install kernel-module-r8712u
opkg install kernel-module-zd1211rw
opkg install r8192c
reboot
###########################################################################################
Download:
2014-07-12
https://mega.co.nz/#!854lTSwA!o0yqgVukH-wSqQNd-YdeBlWWpbNQ6KpM6zoYKD0Ybv4
Jasper
#####################################################################
Newnigma2 team proudly presents:
Newnigma2 v4.0.11
#####################################################################
Basics:
DM 800 HD se
changelog E2 24.06.2014:
changelog E2 16.06.2014:
changelog E2 14.03.2014:
Notice: Update from v4.0.x to 4.0.11 only possible by updating via console.
Changes:
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.11:
if you have troubles by upgrading to v4.0.11 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".
Wichtige Änderungen:
1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"
2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.
3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!
4. Bei Problemen mit dem Update auf v4.0.11:
Sollte das Update auf v4.0.11 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.
Sim2-DM800SE-Newnigma2 LEAN v4.0.11 SIM2 #84d Jasper (2014-07-12)
Clean, no changes.
Sim2
SSL84d
Enigma2: 2014-06-24-tarball (thx ramiMAHER)
#########################################################################################
Webinterface is working.
Teletext is working.
#########################################################################################
Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)
#########################################################################################
No WLAN driver included (this is a feature of Newnigma Lean image):
The following drivers are available on the online feed:
Open a Telnet session to install or use Newnigma2 Services/Softwaremanager/Online Installation/show all packages to install:
opkg install kernel-module-carl9170
opkg install kernel-module-rt2800usb
opkg install kernel-module-rt73usb
opkg install kernel-module-r8712u
opkg install kernel-module-zd1211rw
opkg install r8192c
reboot
###########################################################################################
Download:
2014-07-12
https://mega.co.nz/#!854lTSwA!o0yqgVukH-wSqQNd-YdeBlWWpbNQ6KpM6zoYKD0Ybv4
Jasper
#####################################################################
Newnigma2 team proudly presents:
Newnigma2 v4.0.11
#####################################################################
Basics:
- Enigma2 4.0: 24.06.2014
- Enigma2 Plugins: 11.07.2014
- Newnigma2 Plugins: 11.07.2014
DM 800 HD se
- driver: 16.06.2014
- secondstage: 84
- kernel 3.2.59
changelog E2 24.06.2014:
- Use the setting "Automatic wakeup from standby for zap timer" for idle mode, too
- Hbbtv: fixed playback of zdf video streams
- Fixed possible crashes on enigma2 start
- Reworked .cuts file handling to work properly on network storage
(and fixed possible crashes during recordings)
changelog E2 16.06.2014:
- correctly apply AC3/PCM delay on mediafile play (MKV, MP4....)
- small datetime converter fix
- HdmiCec:
- broadcast system standby instead of sending it only to the tv (fixes AVR's not turning off)
- impelment basic volume punchthrough
- add hack for not working CEC poweroff on strange TVs not provides a EDID when powered off
- fixed possible lost cec commands on enigma2 shutdown - fixed possible crash on harddisk re-init, allow fsck for ext4 (thx to jophi)
- re-read .cuts file during playback when needed (e.g. record stopped)
dont overwrite .cuts file on record stop... just append event markers
see more information - added US_ULTRA and US_JUMBO band to cablescan
- add needed changes for current DVB-C tuner transponder search tools
- fixed crash (TYPO) on mute press (delete) on end of textfield
changelog E2 14.03.2014:
- updated translations
- added some audio/video type extensions
Notice: Update from v4.0.x to 4.0.11 only possible by updating via console.
Changes:
- Added: Skin Evolution-HD by Kerni (thx)
- Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
- Added: Kerni.Gnome-HD by Kerni (thx)
- Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
- Added: mediaportal
- Added: swapmanager
- Added: wget
- Added: stat
- Added: weathercomponent (needed for some skins)
- Added: eventposition (needed for some skins)
- Added: reftopiconname (needed for some skins)
- Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
- Added: Black-Box.HD.ME (32bit skin)
- Added: cryptsetup more information
- Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
- Added: free space check's before installing or upgrade packages
- Added: min free flash space is 3mb for installing/upgrading some packages
- Added: improve network connectivity check in newnigma2 installer
- Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
- Added: readded extendedinfobar
- Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
- Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
- Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
- Bugfix: neutrino keymap
- Bugfix: newnigma2.Kerni.PanTV-HD icons
- Bugfix: Caid Renderer didn't close ecm.info and share.info properly
- Bugfix: for loading wrong or no newnigma2 service menu png's
- Bugfix: loosing picon value in servicelist after using configsaver
- Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
- Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
- Bugfix: broken gui installer
- Update: Some improvements on our onlineinstaller
- Update: znc to version 1.4
- Update: openvpn to version 2.3.4
- Update: german translation
- Update: mediaportal to version 5.3.2
- Update: added weatherfunction only for newnigma2-HD inforbar
(blue button -> newnigma2 services -> osd function -> weather infobar -> on) - Update: picon renderer. create piconSList dir for servicelist picons.
- Update: IPTV-List-Updater
- Removed: we have removed non working plugins. most of them are integrated in mediaportal.
- Removed: keymanger plugin from image. It's still available from our feed.
- here u can find USB to UART driver
- here u can find DreamUP V1.3.3.11
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.11:
if you have troubles by upgrading to v4.0.11 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".
Wichtige Änderungen:
1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"
2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.
3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!
4. Bei Problemen mit dem Update auf v4.0.11:
Sollte das Update auf v4.0.11 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.
