[DM800HD]No ca found....and my serial port doesn't work

[Nabukodonosor]

Please help meeee!! I'm getting insane! I have an 800HD with sim 2.01 and ssl76 (was before, now it says #84b on no ca found screen). I've made the null modem cable by the picture below, but no method recognize my box. I've tried NCF-SIM2-v2.5, optiflasher 1.0.9, patched dreamup and nothing sees my box. Also tried hyper terminal and I get no info back. Nothing. Tried all this on two laptops and one desktop computer. I guess there's something wrong with connection on my box. What to do now?

http://www.doom9.org/DigiTV/images/dreambox/Null_ Modem.gif

 

[BM300]

You only need points 2,3 & 5 connected on your serial cable

Try reloading an image with the old boot-loader first
​

 

[Nabukodonosor]

I can't load anything, i don't have any communication with the box.

 

[BM300]

If you know the IP address of your dreambox, there is a nice way of going round this.
Inter that IP in your router.
You can then easily communicate with the your box.

The normal way is to enter the IP address in your browser and send the image to dreambox.​

 

[maltB]

Hi!
Can you try using DreamUp_patched_by_forhike_and_natas? Admittedly it takes a long time (ca. 70 mins) but it worked for me in the past; it might be worth a try.
Regards
Bob

 

[PREDATOR70]

Nabukodonosor, per mua provoni perseri te hidhni ssl76 dhe me pas te instaloni nje imazh te ketij formati, nese ju arrini ta beni kete me pas mundohuni te instaloni ssl84b, nuk di a mund ta instalosh se mos e ke instaluar gabim, pasi ju te keni instaluar ssl84 provoni te hidhni nje imazh dreamelite apo edhe edgnemesis, ka imazhe qe nuk ti merr ky dreambox edhe se ssl eshte ok sipas te dhenave, perdor per hedhjen e imazhit DreamUp 1.3.3.9 dhe me cabell rs 232, besoj do te jesh ok, ju pershendes.

 

[PREDATOR70]

Nabukodonosor, for me try again to take ssl76 and then to install an image of this format, if you manage to do this then try to install ssl84b I do not know if I can install that you have not installed error after you've ssl84 installed try to take a picture or even edgnemesis dreamelite, there are images that do not you take this dreambox even that ssl is ok according to the data, the image used for laying DreamUp 1.3.3.9 and rs 232 Cabell, I will be ok, greet you.

 

[PREDATOR70]

Excuse me for the mistake of publishing inadvertently slip in the forum, please understand me that was a lapse from my hand, I hope to mirekuptohet by administrators.

 

[Nabukodonosor]

If you know the IP address of your dreambox, there is a nice way of going round this.
Inter that IP in your router.
You can then easily communicate with the your box.

The normal way is to enter the IP address in your browser and send the image to dreambox.​

This is impossible when you have "no ca found" error.

Hi!
Can you try using DreamUp_patched_by_forhike_and_natas? Admittedly it takes a long time (ca. 70 mins) but it worked for me in the past; it might be worth a try.
Regards
Bob

I cannot communicate with the box. My serial port on the box refuses to work.

 

[maltB]

Is the cable ok? (Obvious I know but s*** happens!)

 

[Nabukodonosor]

Yes it is. I inspected it with an instrument. It was made by the electric scheme on the image in my first post.