DM800HD clone can't flash

[andygflash]

I have a (just found out) cloned dm800hd box, sim is "dm800, sim210"

I tried to flash a new image, it seemed to work ok but I got the "no ca found" error message when rebooted.

I read guides and forums and I've downloaded a patched version of dreamup, optiflasher and the ca repair tool.

I have the box connected to the router via ethernet and a null modem cable to pc. All of the above repair options get me to the first stage but can't get me further.

No ca repair tool sends flash loader to 100% but then I get an error saying "ncf sim2 v2 - invalid filename" and it hangs forever.

Patched dreamup uploads flash loader to 100% and I get message "box is networked HTTP mode" and using the IP address on the LCD, I can access the dreambox browser page and I can browse for the image file but the "flash" button doesn't respond at all. I've also tried to flash direct from dreamup via serial connection, I get the message "flashing failed (unknown) box will be unusable now.

With optiflasher (enigma 2edition) I get flash loader to 100% but when I'm asked to put in the IP address shown on the LCD I get the error message "socket error # 10065" " no route to host"

I've tried everything but can't get past this, please please please help!?

 

[Ferret]

Patched dreamup uploads flash loader to 100% and I get message "box is networked HTTP mode" and using the IP address on the LCD, I can access the dreambox browser page and I can browse for the image file but the "flash" button doesn't respond at all. I've also tried to flash direct from dreamup via serial connection, I get the message "flashing failed (unknown) box will be unusable now.

Have you tried other browsers with the method your using above ?

 

[cokey]

i had the same problem got rid of no ca now have a picture of a dm 800 then goes off and i get no signal on tv

 

[Ferret]

i had the same problem got rid of no ca now have a picture of a dm 800 then goes off and i get no signal on tv

Sounds like the box is stuck in its boot process, reflash if it does the same remove the tuner if it then boots the tuner is faulty.

 

[cokey]

every time i re-flash with firefox after reboot goes to no ca found use nca fix then get newnigma2 then goes to dreambox yellow band gets halfway accross then turns box off leaving blue light on the front.

 

[cokey]

and now every time i try to flash it it says wrong architecture

 

[Ferret]

every time i re-flash with firefox after reboot goes to no ca found use nca fix then get newnigma2 then goes to dreambox yellow band gets halfway accross then turns box off leaving blue light on the front.

and now every time i try to flash it it says wrong architecture

Wrong architecture means your flashing a image for another DM ie 800 image on a 800se

No ca is caused by flashing wrong image for you sim type. Check what sim you have.

 

[hepo1]

yes wrong flash for wrong box..or you u put flash image to orig. dream.. u need a use DreamUP for re-flash

 

[shaikhali]

dear
flash with supported image ssl#84c or d check also
sim properly inserted in socket.

 

[shaikhali]

i think dm 800 se has 2.10 sim fllash with right one image