DM600pvr Darkstar 2

[tow]

Hi,

I ve installed Darkstar 2 from this site on my DM600PVR but when installed Cccam 2.3.0 from addons nothing worked besides FTA, and on the others says 'This service could not be descrambled'

Any help??

 

[Brummie]

what are you trying to descramble have you inserted keys ?????

 

[tow]

No, Cline from my friend, the cline is active as it works on my DM500

 

[Ferret]

Make sure you have started CCcam on the blue button.

And obviously you can not use the same line on 2 boxes at the same time.

 

[tow]

Make sure you have started CCcam on the blue button.

And obviously you can not use the same line on 2 boxes at the same time.

CCcam is active as it is set to default in the blue panel, no, my DM500 is switched off thats why I am using the same cline. The usual CCcam.cfg it used to be in /var/etc in DM500 while on DM600 its in /etc is that ok and I ve delete all the data in the file just paste my cline and set attributes to 755.

Did anything wrong?

 

[RIDER]

attributes to 755. do it on secce not on keys if i was you make ccam 214 you must insert the keys and secce example do satan key bundle after you put keys sece update a lateset keys of any

 

[tow]

attributes to 755. do it on secce not on keys if i was you make ccam 214

I don't have secce I have scce and what to do there?, I dont use keys and on the addons CCCam 2.1.4 is not available.

 

[Brummie]

ftp to var/bin and make sure your CCcam.bin file is also 755

 

[tow]

ftp to var/bin and make sure your CCcam.bin file is also 755

In the usr/bin I do not have CCcam.bin I only have CCcam_2.3.0, anything wrong?

 

[Brummie]

that should be a bin file and set to 755 right click on it an properties on it

 

[tow]

that should be a bin file and set to 755 right click on it an properties on it

set attributes to CCcam.cfg and CCcam_2.3.0 to 755 but still having the same error 'This service could not be descrambled'.

When you download a CCcam addon 2.3.0 complete should you edit something besides CCcam.cfg for the cline as normally all the images I ve downloaded had the CCcam already installed..

 

[tow]

that should be a bin file and set to 755 right click on it an properties on it

Now I ve noticed that I have 2 bin folders one is usr/bin and the other /bin the file I ve set attributes was in usr/bin..

 

[Brummie]

try this one in my opinion its the best one aswell http://www.sat-universe.com/showpost.php?p=492111&postcount=9 delete the others before you install ftp to tmp then manually install

 

[tow]

try this one in my opinion its the best one aswell http://www.sat-universe.com/showpost.php?p=492111&postcount=9 delete the others before you install ftp to tmp then manually install

Done but still with the same problem, is there any files I should check for? even the structure is different from a DM500

 

[tow]

By any chance do you have a link for a Gemini image DM600PVR Clone? maybe ill try to change the image..

 

[Brummie]

here you go i downloaded it and uploaded it here for you http://www.sendspace.com/file/aeuatm

 

[tow]

here you go i downloaded it and uploaded it here for you http://www.sendspace.com/file/aeuatm

Ok for clones?

Thanks mate

 

[Brummie]

i should not think so i would not trust it

 

[Brummie]

i just googled and found this

Gemini Project 4.70 DM600PVR - for Clone
gemini-470-dm600pvr-clone

Patched NFI Image for DM600
working with clone DM600 - BL#54


http://uploading.com/files/fea8127c/gemini-470-dm600pvr-clone.rar/

 

[tow]

Thanks mate, seems that now is working...