dm 500 hd -ferrari sim and gamma card

[martinakis]

Can you tell me whether dm 500 hd ferrari sim can read gamma card?

 

[xxxAxxx]

there's nothing to do if you have ferrari sim,sim 2.01 or porche sim,bmw sim...it can work..it's only how to do right setting and config on your card reader..check on gamma section you will find many setting on reader and emu

 

[martinakis]

I programming the card with gama loader 1.1 with canal nl file,but when put card in dm 500 hd ,cccam info show - card reader /dev/sci0
no or unknown card inserted.

 

[Brummie]

have you added this to your CCcam.cfg
CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0

works fine with CCcam 2.1.3 on receivers ive tried 800 and 800se

 

[martinakis]

I use this config ,but drerambox not detected card.When I put card in dm 800 ,no problem.

 

[Ferret]

Try not seating the card all the way in just easy it back a millimeter or so reboot and try again.

Even backup your config off the 800 and use it on the 500 see if that helps.

 

[Brummie]

have you added the card freq aswell

SMARTCARD CLOCK FREQUENCY : /dev/sci0 6000000

 

[martinakis]

I add but nothing,before 10 min I put card in phoenix programmer and detect card - caid 622

 

[Brummie]

canal digital takes a long time to update leave the channel on an RTL channel but it can take a while

 

[martinakis]

Ok,but when box no detected card and to stay long time on channel,dont have a result.I use file on verdeoro http://www.sat-universe.com/showthread.php?t=197962 and update card for some minutes.

 

[Brummie]

I add but nothing,before 10 min I put card in phoenix programmer and detect card - caid 622

leave it in reader if its detecting the card and just change the config in cccam, but im not sure if cccam will read the serial reader you may have to use newCS