Diseqc motor set up problem

[mongar]

Hi, I can't setup the motor on dreambox 500s, I tried to do it step by step but notting. Pleasei i need help.

 

[Ferret]

Set up as follows

Choose Complex for Diseqc 1.2 or Usuals/Goto X

Makw sure the goto x box is ticked and enter your Longitude and latitude and press the green button to save.

If you not sure of your coordinates then use this site to find them.

http://www.dishpointer.com/

Enter your post code and select go.

 

[mongar]

i'm using disecq 1.2 and i've got Latitude: 51.5335°
Longitude: 0.1920°
what i'm going to do next FERRET please? i need only 3 satellites (astra 19, hotbird 13 and astra2 28)

 

[Ferret]

As i explained above enter the coordinates.

menu-setup-service searching-motor setup/sat configuration

Top Option change to

many satellites via diseqc rotor and press green button to save.

Tick the goto x option then enter coordinate and green button to save.

 

[mongar]

i've done it but but no signal for astra 19,

 

[Ferret]

Do the other work ? And do you know dish alignment is correct ?

 

[mongar]

hi, before dreambox 500s, I use Maxx1000 and everything all satellites work and ease to set up motor disecq but dreambox 500s I dont know how to set up.
please can you give me step by step motor setting on dreambox500s? thank you

 

[mongar]

setup, service searching, sat config, many satellite and I'm stuck. I don't know what to do?