Got the duo2 yesterday, after using a standard box for a year or so, after the IP9000HD as I had before died.
I have installed the latest blackhole 2.0.5 image on the Duo2, and I have a 2.5 hdd connected to the esata plug.
So I'm a bit rusty at this, in addition to this being a new box.
I can't get it to decode the channels I subscribe on. I know the rest of the setup works as free to air works fine.
The card I have is a conax card and I have installed mgcamd 1.38c and 1.3.6 (1.35c?).
Got the last one from here: mgcamd how to
I manly used the files downloaded from here.
I have set it to 1.35c (1.3.6) on the duo2, so that isn't the problem.
As the guide says, I entered the following while logged in with telnet:
I tried to use different ips, both 172.16.1.1:28007, localhost:20000 and also local ip of the duo2 in my network.
Not certain what ip or port to use, but I think I remember that 176.16.1.1 is a local ip. Usually that is 127.0.0.1 which I haven't tried.
The mgcamd.log reads:
I have also considered oscam, but as I don't even know the version I need to install to the duo2.
I have installed and use oscam before on the IP9000HD using enigma2, but all I remember was that it was as struggle to get to work, and that enigma2 was too unstable on the IP9000HD so I got rid of it.
Any suggestions?
I have installed the latest blackhole 2.0.5 image on the Duo2, and I have a 2.5 hdd connected to the esata plug.
So I'm a bit rusty at this, in addition to this being a new box.
I can't get it to decode the channels I subscribe on. I know the rest of the setup works as free to air works fine.
The card I have is a conax card and I have installed mgcamd 1.38c and 1.3.6 (1.35c?).
Got the last one from here: mgcamd how to
I manly used the files downloaded from here.
I have set it to 1.35c (1.3.6) on the duo2, so that isn't the problem.
As the guide says, I entered the following while logged in with telnet:
Code:
echo >/usr/keys/newcamd.list CWS_KEEPALIVE = 300
echo ****/usr/keys/newcamd.list CWS_INCOMING_PORT = 21000
echo ****/usr/keys/newcamd.list CWS = 192.168.1.100 20000 username password 10 02 13 04 15 06 17 08 01 10 11 12 13 14 wan cardsrv
echo ****/usr/keys/mg_cfg “G: { 01 }”
echo ****/usr/keys/mg_cfg “P: { 00 }”
I tried to use different ips, both 172.16.1.1:28007, localhost:20000 and also local ip of the duo2 in my network.
Not certain what ip or port to use, but I think I remember that 176.16.1.1 is a local ip. Usually that is 127.0.0.1 which I haven't tried.
The mgcamd.log reads:
Code:
tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
[mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:4:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dbox2
Conax.Key error 2: No such file or directory
Keys readed
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = username:172.16.1.1:28007 server cardsrv
newcamd keep alive: 300, incoming port: 21000
[mgcam] emm thread started
[newcamd] Connecting to 172.16.1.1:28007...
got 50 cmd 9F
[mg0] namespace E080000 t-id 47 on-id 46
[mg0] descramble on 1, source 0
[mg0] service 426D index 0 pmt pid 264 (1), pids: video 0x0201, audio 0x0288 0x0240
[mg0] ECM: CaID: 0x0B00 -> CaPID: 0x0065 ProvID: 000000
[mg0] No conax key(s) found for id 0 keynr 30
[mg0] network can't decode
[mg0] pid 0x0065 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x0B00 -> CaPID: 0x0030 ProvID: 000000
[mgcamd] emm stopped
[newcamd] Connection to 172.16.1.1:28007 failed (63096ms)
[mg0] stoping camd..
got 8 cmd 9F
got 50 cmd 9F
[mg0] namespace E080000 t-id 19 on-id 46
[mg0] descramble on 1, source 0
[mg0] service 9D2 index 0 pmt pid 104 (3), pids: video 0x0203, audio 0x0290 0x0246
[mg0] ECM: CaID: 0x0B00 -> CaPID: 0x0041 ProvID: 000000
[mg0] No conax key(s) found for id 0 keynr 30
[mg0] network can't decode
[mg0] pid 0x0041 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x0B00 -> CaPID: 0x0030 ProvID: 000000
[mgcamd] emm stopped
[mg0] stoping camd..
got 8 cmd 9F
[newcamd] Connecting to 172.16.1.1:28007...
got 39 cmd 9F
[mg0] namespace E080000 t-id 20 on-id 46
[mg0] descramble on 1, source 0
[mg0] service 711 index 0 pmt pid 107 (5), pids: video 0x0203, audio 0x028C
[mg0] No supported encryption system found
[mg0] stopped
[mg0] stoping camd..
got 8 cmd 9F
got 50 cmd 9F
[mg0] namespace E080000 t-id 19 on-id 46
[mg0] descramble on 1, source 0
[mg0] service 9D2 index 0 pmt pid 104 (7), pids: video 0x0203, audio 0x0290 0x0246
[mg0] ECM: CaID: 0x0B00 -> CaPID: 0x0041 ProvID: 000000
[mg0] No conax key(s) found for id 0 keynr 30
[mg0] network can't decode
[mg0] pid 0x0041 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x0B00 -> CaPID: 0x0030 ProvID: 000000
[mgcamd] emm stopped
[newcamd] Connection to 172.16.1.1:28007 failed (62129ms)
I have also considered oscam, but as I don't even know the version I need to install to the duo2.
I have installed and use oscam before on the IP9000HD using enigma2, but all I remember was that it was as struggle to get to work, and that enigma2 was too unstable on the IP9000HD so I got rid of it.
Any suggestions?