Hallo great forum here.
i have 2 problems
1.my satnux 600+HD clone of DM 800 is dead after flashing i get thes massage "NO CA found by 2nd stage loader, please contact support at dream-multimedia" and when i try to use enforce i get a massage " file to big"
i need help i have try google the last 2 days and 2 thing to doo but it don´t work. i have try this
This can be done in 2 ways.
1) You have to have a working dreambox.
2) DM800_repair, you alter dreamup to be able to use greyed buttons.
Now for the first sollution.
1) Connect working dreambox DM600/DM800.
2) Open dreamup, press connect.
3) When dreambox is found by dreamup, insert Null-Modem cable in
the broken dreambox.
4) Press flash button, and chose a firmware.
5) The flash progress will probably hang, its OK.
6) Open dreamup again, connect the broken box, press connect.
7) If all went ok, you can now flash box again, (Use only serial
communication)
Now for the second sollution
1) Connect broken dreambox DM600/DM800
2) Open dreamup, press connect.
3) When you see second loader error popup, just press ok.
4) Open http://www.gsmsweden.com/forhike/sat/dm800/2nd_stage_pack.rar
5) Drag DM800_repair in front of dreamup, and press dream multimedia logo.
6) Now press the greyed Flash button, and chose firmware.
7) The flash progress will probably hang, its OK.
8) Open dreamup again, connect the broken box, press connect.
9) If all went ok, you can now flash box again, (Use only serial
communication)
But still don´t work
my second problem is text on the HD channel´s have tryed gemini 4.2 og naoblisat blach hole 0,10 and 2sub but it dont work
which image and text program will work on a 800 clone?????
Best regards Hamsjel
PS. hobe that you can understand my english Sorry
i have 2 problems
1.my satnux 600+HD clone of DM 800 is dead after flashing i get thes massage "NO CA found by 2nd stage loader, please contact support at dream-multimedia" and when i try to use enforce i get a massage " file to big"
i need help i have try google the last 2 days and 2 thing to doo but it don´t work. i have try this
This can be done in 2 ways.
1) You have to have a working dreambox.
2) DM800_repair, you alter dreamup to be able to use greyed buttons.
Now for the first sollution.
1) Connect working dreambox DM600/DM800.
2) Open dreamup, press connect.
3) When dreambox is found by dreamup, insert Null-Modem cable in
the broken dreambox.
4) Press flash button, and chose a firmware.
5) The flash progress will probably hang, its OK.
6) Open dreamup again, connect the broken box, press connect.
7) If all went ok, you can now flash box again, (Use only serial
communication)
Now for the second sollution
1) Connect broken dreambox DM600/DM800
2) Open dreamup, press connect.
3) When you see second loader error popup, just press ok.
4) Open http://www.gsmsweden.com/forhike/sat/dm800/2nd_stage_pack.rar
5) Drag DM800_repair in front of dreamup, and press dream multimedia logo.
6) Now press the greyed Flash button, and chose firmware.
7) The flash progress will probably hang, its OK.
8) Open dreamup again, connect the broken box, press connect.
9) If all went ok, you can now flash box again, (Use only serial
communication)
But still don´t work
my second problem is text on the HD channel´s have tryed gemini 4.2 og naoblisat blach hole 0,10 and 2sub but it dont work
which image and text program will work on a 800 clone?????
Best regards Hamsjel
PS. hobe that you can understand my english Sorry
Last edited: