CrossEpg on DMM-DE-800-V2-0-ramiMAHER

[nacer1963]

hi ferret
this is the 2nd time I seek your advice, I DMM-DE-800-V2-0-ramiMAHER on my box, I can not install and activate CrossEpg, I followed all the tutorials but can not activate.
a solution ?????
thank you

** I tried nemesis2.2 as advised but it crashes a lot

 

[yokibear]

any help about this topic lads please

 

[Ferret]

Sorry mate im not familiar with ramiHAHer images so can not say.

Why not try installing another cersion of crossepg to see if it installs.

This is the latest

http://www.sat-universe.com/showpost.php?p=784675&postcount=47

Transfer the ipk to the tmp folder and do a manual install. I take it you have tried downloading from the TSpanel ?

Ferret

 

[nacer1963]

hello Ferret,
CrossEpg was installed in the image, and I have already tried with TS Panel, ca crash.
I tried the version you advise me, and I will share the results.

 

[nacer1963]

hello ferret,
I installed the plugin that you indicated to me, it did not work too, I'll try again a second time.
I also found another problem with dream elite, 800 v2.0,
I install the usb, the dream recognizes it on DCC, I see usb
usb1 and usb2, I send my usb Picon (Internel flash) picon be visible, whether in usb 1 or 2 (true USB) picons refuse to appear)

 

[Ferret]

Is your USB mapped in device manager ?

If so download some picons for addons server then look in media/usb/plugins if the picon are there then you can manual install the ones you want to that location.

 

[yokibear]

nacer if you send your picons to the internal flash not good you need to send the picons to external usb flash the dreambox the dm800hd has only 64 mb its not enough space for the picons to go there that what cause the dreambox to crash green screen

 

[nacer1963]

hello,
DMM_DE_800_V2.2 on to the USB key is recognized, it
must delete the line, in etc / fstab
/ dev/sda1 / media / hdd auto defaults 0 0

 

[nacer1963]

hello ferret,
I solved the problem,
I installed the latest version you advised me (0.6.2 svn 300) and with dcc in user / bin, I added this line
(/ usr / crossepg / crossepg_epgmove.sh)
just bellow the line:
LD_PRELOAD = / usr/lib/libopen.so.0.0.0 / usr/bin/enigma2
and it works.

ferret, thank you very much for your help and your advice

:thanx::thanx::thanx: