hi all
i have technosat hd with conax 0B00 card thes card was working in sharing 2 dyes with newcs 1.17 with thesis config
==========================<name>phoenix</name>
<type>Phoenix</type>
<node>COM3</node>
<mhz>600</mhz> <!-- or 357 -->
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>yes</blocksa>
<blockua>yes</blockua>
<blockga>yes</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10110</newcamd_port>
<priority>round</priority><!-- hard is default -->
==================================================
but this card was stop and i active the card in hes reviser technosat after that the card didn't work at sharing a gain with any EMU and its a oscam log file from the dreambox
dm-500
-------------------------------------------------------------------------------
**** OSCam << cardserver started at Sun Jun 26 11:33:39 2011
-------------------------------------------------------------------------------
2011/06/26 11:33:39 287 s version=0.99.4svn.r517.p2, system=powerpc-dreambox-linux
2011/06/26 11:33:39 287 s max. clients=29, client max. idle=120 sec
2011/06/26 11:33:39 287 s max. logsize=unlimited
2011/06/26 11:33:39 287 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/06/26 11:33:39 287 s shared memory initialized (size=406376, fd=3)
2011/06/26 11:33:39 287 s auth size=4736
2011/06/26 11:33:39 287 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/06/26 11:33:39 287 s userdb reloaded: 0 accounts freed, 1 accounts loaded
2011/06/26 11:33:39 287 s signal handling initialized (type=sysv)
2011/06/26 11:33:39 287 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/06/26 11:33:39 287 s monitor: initialized (fd=8, port=98
2011/06/26 11:33:39 287 s camd 3.3x: disabled
2011/06/26 11:33:39 287 s camd 3.5x: disabled
2011/06/26 11:33:39 287 s cs378x: disabled
2011/06/26 11:33:39 287 s newcamd: initialized (fd=9, port=34000, crypted)
2011/06/26 11:33:39 287 s CAID: 0B00
2011/06/26 11:33:39 287 s provid #0: 000000
2011/06/26 11:33:39 287 s radegast: disabled
2011/06/26 11:33:39 287 s resolver thread started
2011/06/26 11:33:39 287 s logger started (pid=289)
2011/06/26 11:33:39 287 s resolver started (pid=290, delay=30 sec)
2011/06/26 11:33:39 287 s reader started (pid=291, device=/dev/sci0)
2011/06/26 11:33:39 287 s Waiting for local card init ....
2011/06/26 11:33:39 291 r02 card detected
2011/06/26 11:33:41 291 r02 ATR: 3B 34 94 00 30 42 30 30
2011/06/26 11:33:42 291 r02 type: conax, caid: 0B00, serial: 0, card: v0
2011/06/26 11:33:42 291 r02 Conax-Provider:0
2011/06/26 11:33:42 291 r02 ready for requests
2011/06/26 11:33:42 291 r02 card detected
2011/06/26 11:33:42 291 r02 type: conax
2011/06/26 11:33:42 287 s Init for all local cards done !
2011/06/26 11:33:42 287 s anti cascading disabled
=============================================
i thank so the card is chanciness to paired cards
how to get the boxkey
thanks alto
i have technosat hd with conax 0B00 card thes card was working in sharing 2 dyes with newcs 1.17 with thesis config
==========================<name>phoenix</name>
<type>Phoenix</type>
<node>COM3</node>
<mhz>600</mhz> <!-- or 357 -->
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>yes</blocksa>
<blockua>yes</blockua>
<blockga>yes</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10110</newcamd_port>
<priority>round</priority><!-- hard is default -->
==================================================
but this card was stop and i active the card in hes reviser technosat after that the card didn't work at sharing a gain with any EMU and its a oscam log file from the dreambox
dm-500
-------------------------------------------------------------------------------
**** OSCam << cardserver started at Sun Jun 26 11:33:39 2011
-------------------------------------------------------------------------------
2011/06/26 11:33:39 287 s version=0.99.4svn.r517.p2, system=powerpc-dreambox-linux
2011/06/26 11:33:39 287 s max. clients=29, client max. idle=120 sec
2011/06/26 11:33:39 287 s max. logsize=unlimited
2011/06/26 11:33:39 287 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/06/26 11:33:39 287 s shared memory initialized (size=406376, fd=3)
2011/06/26 11:33:39 287 s auth size=4736
2011/06/26 11:33:39 287 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/06/26 11:33:39 287 s userdb reloaded: 0 accounts freed, 1 accounts loaded
2011/06/26 11:33:39 287 s signal handling initialized (type=sysv)
2011/06/26 11:33:39 287 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/06/26 11:33:39 287 s monitor: initialized (fd=8, port=98
2011/06/26 11:33:39 287 s camd 3.3x: disabled
2011/06/26 11:33:39 287 s camd 3.5x: disabled
2011/06/26 11:33:39 287 s cs378x: disabled
2011/06/26 11:33:39 287 s newcamd: initialized (fd=9, port=34000, crypted)
2011/06/26 11:33:39 287 s CAID: 0B00
2011/06/26 11:33:39 287 s provid #0: 000000
2011/06/26 11:33:39 287 s radegast: disabled
2011/06/26 11:33:39 287 s resolver thread started
2011/06/26 11:33:39 287 s logger started (pid=289)
2011/06/26 11:33:39 287 s resolver started (pid=290, delay=30 sec)
2011/06/26 11:33:39 287 s reader started (pid=291, device=/dev/sci0)
2011/06/26 11:33:39 287 s Waiting for local card init ....
2011/06/26 11:33:39 291 r02 card detected
2011/06/26 11:33:41 291 r02 ATR: 3B 34 94 00 30 42 30 30
2011/06/26 11:33:42 291 r02 type: conax, caid: 0B00, serial: 0, card: v0
2011/06/26 11:33:42 291 r02 Conax-Provider:0
2011/06/26 11:33:42 291 r02 ready for requests
2011/06/26 11:33:42 291 r02 card detected
2011/06/26 11:33:42 291 r02 type: conax
2011/06/26 11:33:42 287 s Init for all local cards done !
2011/06/26 11:33:42 287 s anti cascading disabled
=============================================
i thank so the card is chanciness to paired cards
how to get the boxkey
thanks alto