Clarke-Tech 5000 Combo + and CCAM

[tehu]

No way for the moment to use CCAM without a connection to a PC (A way where the CT5000+ could connect directly to the CCAM server) ?

 

[ronald68]

cccam

Robert,
These lines look like newcamd

If you want to connect to a cccam server
The person with this server has to make a
F:line in his setup (config; PC/Dreambox)
so he allows you to connect
He will have to give his Ip,poort,want emu(o/1),username,password
These you put in youre f: line
You also have to open this poort for fausto in youre firewall/virusscanner?modem/router

############################################################ ##############################################
# syntax for CCcam Client connection
# F: IP PORT WANTEMU USERNAME PASSWORD {CAID-4 byte len/PROVIDS-6 bytes len}
# WANTEMU=0 Disable CCCam Emu on sharing
# WANTEMU=1 Enable CCCam Emu on sharing
# example:
# F: 127.0.0.1 9000 1 dummy dummy

IP adress Poort Username Passwo
F: kallo789.no-ip.kiz 14000 0 donald 14333 (i changed F line in detial for privecy)


Gr ronald68

 

[robertjust]

Robert,
These lines look like newcamd

If you want to connect to a cccam server
The person with this server has to make a
F:line in his setup (config; PC/Dreambox)
so he allows you to connect
He will have to give his Ip,poort,want emu(o/1),username,password
These you put in youre f: line
You also have to open this poort for fausto in youre firewall/virusscanner?modem/router

############################################################ ##############################################
# syntax for CCcam Client connection
# F: IP PORT WANTEMU USERNAME PASSWORD {CAID-4 byte len/PROVIDS-6 bytes len}
# WANTEMU=0 Disable CCCam Emu on sharing
# WANTEMU=1 Enable CCCam Emu on sharing
# example:
# F: 127.0.0.1 9000 1 dummy dummy

IP adress Poort Username Passwo
F: kallo789.no-ip.kiz 14000 0 donald 14333 (i changed F line in detial for privecy)


Gr ronald68

Thanks Ronald68.

Robertjust

 

[ronald68]

New version software

You can download the new version of Fausto; 1.40 (cccam software).
From public download -> Clarke tech Cccam latest new Software.

Have fun ronald68

 

[ronald68]

Cccam software Clarke tech

Now latest software is in this section.
Fausto can do more than just cccam.

Have fun

ronald68

 

[DeXXXteR]

Hi, my receiver is CT 5000HD C+.

Can I use Fausto with my ethernet interface from receiver ??

Receiver(newcamd)[LAN] <> (server-newcamd) Fausto (client-cccam) <> CCcam server

I have no cam, Diablo or other types, it is possible to connect my receiver to CCcam server ???

Thank you !!!

 

[ronald68]

Ethernet

I am Busy with it, i can now connect to the reciever with newcamd (server in fausto)by ethernet, and also to cccam server (client in fausto) but i can not yet get info from one to the other.

I am now trying This:
Set DCW Timeout with correct value Under FESettings.ini
For doing that
Under Emulator window
Clic on tab SETUP
Select File FESETTINGS.INI
Clic on open button
serch line DVBCWTimeout=200
change value
Example for CS increasse timeout To 3000 or 5000

Grr ronald68

 

[DonRandy]

I tried this Fausto with my friends CCcam but no channel opened.i need a better explanation,my friend sees me as a clint in his box but my channels dont open.

 

[ronald68]

How are you connected to youre reciever?
With 0 modem cable i got it working, ethernet under constuction.
If you go to tab serial and u push connect, does it connect ?
Did you activate sssp?
Change channel on reciever than it willread pcm/ecm, put v V for that, do you see date?
bauds:115200
parity:none
stopbits:1
Databits:8
Delay:100

Grr ronald68

 

[DonRandy]

Yes i did all thats why my friend sees me on his box. ok am gonna try again

 

[DonRandy]

How are you connected to youre reciever?
With 0 modem cable i got it working, ethernet under constuction.
If you go to tab serial and u push connect, does it connect ?
Did you activate sssp?
Change channel on reciever than it willread pcm/ecm, put v V for that, do you see date?
bauds:115200
parity:none
stopbits:1
Databits:8
Delay:100

Grr ronald68

What ver software is in your reciever mine is 1.55p

 

[ronald68]

On youre pc/router/modum did you open poort/firewall/firusscanner for youre reciever or for test dissable.?

Gr ronald68

 

[DonRandy]

I am a clint to my friends server so i do not need to open port i'll try with firewall and antivirus i'll let u know the result

 

[ronald68]

With me was the internal firewall of the router/modum was the last bridge to cross to connect with the reciever.
Firmware: 179p

Grr ronald68

 

[DeXXXteR]

I did it with ethernet connection.

1. Open Fausto Emulation

2. Create Client ( connection to cccam server )

F: cccam_server_add port 0/1 user password

3. Create Server ( accept connection from CT receiver )

N: newcamd_server_add port1 0102030405060708091011121314 {CaID1/ProvIDS}

one server for one CaIDs, more CaIDs => more servers (same newcamd_server_add, only port must be changed)

newcamd_server_add port[1..n] 0102030405060708091011121314 {CaID[1..n]/ProvIDS}

4. On Clarke-Tech enter menu (82*1)

Create the Connection[1..n] to your newcamd_server_add port[1..n]

more Connections if you want to decrypt different CaIDs channels.

5. Start Faustos's Client/Server

6. Start connection from CT -> PC :thum:

7. Try the channels you want to watch.

----------------------------------------------------------------

I don't know if it's possible to create only one newcamd server for all CaIDs and ProvIDs, any suggestions ???

 

[ronald68]

Sorry i cant help you with the ethernet connection to youre reciever,I still try to get to work it my self.
I think i have the same problem as you,i see connection to both but no data exchange.

With sssp and 0 modem cable i got it working OK.
Try this to get to know more about youre sssp problem

Put working smart card in youre reciever chose working channel and connect serial in fausto; do you see pmt data? (Put a V in show data)
No, do you have the right cable (twisted)?
Did you configure youre comport also in computer hardware?
Did you choose right poort com1/com2 ?

Yes,Start Youre cccam connection for same provider (does it say its connected?)
Put out the smart card, Do you see ecm data ? (take a little time)
You may have to change channel up/down.

Then go to tab monitor and see if cccam is connected and sending data.

Gr ronald68

 

[linch]

for the people that have ctech 5000 combo plus and want cccam inside can install last firmware for technomate super 6900+ that have inside 3c and newcamd but only as client.

 

[ronald68]

technomate

Did any one try this, no crashes?
please some experiances.
Does seca3 still works (canaldigital NL)

Gr ronald68

 

[AbouChadi]

How to TM6900?

Hi Linch, How can I transform my Ctech 5000 C+ to TM 6900 super+ ?
I tried USB and serial cable but "incompatible model" !!!
Thank you...

By the way, the 179p patch have some problems and I hope that the "specialiste" will correct it nearly...

 

[AbouChadi]

How to Strong 4910 ?

Also, Strong 4910 is a clone of Ctech 5000C+ (same structure or form). So how to convert CT 5000 C+ to Srt4910 ?

Thank everybody on this helpfull site...