CCcam Problem with Argus Mini IP???

R

RogerThis

Registered
Messages
11
I installed CCcam_Baff@Edision_Mini_1.1.56_By_DDC.
I have the card shared from another box in my house using cccam.

But the picture goes pixelated every 10 seconds, for a split second. Really annoying and unwatchable.

Does cccam work on the Argus Mini?

Have I got the wrong firmware?

Can any one please help?
 
R

RogerThis

Registered
Messages
11
kargo.25 thanks for your reply. I'll try the CCcam_Baff@Edision_Mini_1.1.56_By_DDC_UPD1 and the ILTV_ArgusMINI_SD_HD_1170_GR firmwares, and let you know how I get on.
 
K

kargo.25

Super VIP
Messages
9,725
RogerThis said:
kargo.25 thanks for your reply. I'll try the CCcam_Baff@Edision_Mini_1.1.56_By_DDC_UPD1 and the ILTV_ArgusMINI_SD_HD_1170_GR firmwares, and let you know how I get on.
Click to expand...

The 2.1.3 was not implemented in FW refreshments are here but if we talk about putting the servant can bring benefits to the operation of mini when it goes to bathe in the sea ... The problem with the servant of the freeze is in the mini 3c currently v2.0.11, which should be "revisited."
 
R

RogerThis

Registered
Messages
11
I tried CCcam_Baff@Edision_Mini_1.1.56_By_DDC_UPD1 and ILTV_ArgusMINI_HD_1170_GR and I am still getting freezes. It's happening every 7 seconds or so.

[2010-08-25 16:09:23] Server[1] Send ecm[caid 0963 pid 0503 table80]
[2010-08-25 16:09:23] Server[1] Get ecm[caid 0963 pid 0503 table80]cw ok
[2010-08-25 16:09:30] Server[1] Send ecm[caid 0963 pid 0503 table80]
[2010-08-25 16:09:30] Server[1] Get ecm[caid 0963 pid 0503 table80]cw ok

I'm using sly uk 28.2E if that makes any difference.
 
R

RogerThis

Registered
Messages
11
kargo.25 said:
The 2.1.3 was not implemented in FW refreshments are here but if we talk about putting the servant can bring benefits to the operation of mini when it goes to bathe in the sea ... The problem with the servant of the freeze is in the mini 3c currently v2.0.11, which should be "revisited."
Click to expand...

Kargo.25 you are either being very cryptic, or it's been lost in translation. But thanks for all the help so far.

Are you saying to try another firmware that has cccam 2.1.3? If so which firmware?

I'm running 2.1.4 on my Vu+ duo.
 
R

RogerThis

Registered
Messages
11
Ok, I got it sorted.

I wasn't able to use CCcam because of the constant freezing. So I installed oscam + cccam 2.1.3 on my Vu+ duo. I was able to setup a newcamd client using oscam to connect to the Argus Mini, and now it's working perfectly.
 
M

Marko77slo

Registered
Messages
2
I just got this receiver to combine the DVB-T and SAT S2, testing the FWs and gonna test how it works with CCcam . I used to have a normal Dreambox 500 and decided to replace it for this HD. Looks ok so far, need to test it with CCcam now.

Any tips about the FW to use with CCcam ?
 
L

lunster

Registered
Messages
2
Argus Mini 2 in 1 Firmware

Rogerthis,

You say you have the firmware for the Argus Mini working. What firmware is this and can you post a link to it.

Thanks,

Lunster
 
L

lunster

Registered
Messages
2
RogerThis,

You have the argus mini working. What firmware did you use?

Can you post a link to the firmware please?

Regards,

Lunster
 
G

gious21

Registered
Messages
31
please i have the same problem with this. in my dreambox its all ok but in argus ip 2 in 1 freeze every some hour. can you post one firmware please ?
 
O

oven

Registered
Messages
7
ILTV software...cccam fixed...

use this...best is ILTV , no problems with server 2.1.1 - 2.2.1 ;) for better performance use and enable "ND*" delay in CA menu!!! try 600-900 ms...!
 
R

RogerThis

Registered
Messages
11
oven said:
use this...best is ILTV , no problems with server 2.1.1 - 2.2.1 ;) for better performance use and enable "ND*" delay in CA menu!!! try 600-900 ms...!
Click to expand...

Oven your a legend. That worked a treat. Thanks a million. I was looking for this for 7 months. The ND_S delay is only available on 1.3.40 and newer. I used this one http://www.sat-universe.com/showpost.php?p=758156&postcount=36 as oven link didn't work for me.

Menu Button
Select "Conditional Access" menu
Select "CA Setting" option
Select "Mcas Config"
Enable "ND_S delay enable"
Set "ND_S delay time" to 700ms
 
Last edited:
G

gious21

Registered
Messages
31
ccam works ok? with this version you are ok my friend? in my ccam freeze all and i need to restart all to play again.
 
M

mixahlid3

Registered
Messages
1
Problem with Edision's technical service

Does any body Knows how to communicate with Edision in Germany by e-mail?
 
You must log in or register to reply here.
Top