CCcam Beta on Ipbox...

[tiesto80]

hello boys and girls...

Have you installed the Beta CCcam on ipbox?
Is it stable or not?
Can you also explain how to install it?

CCcam on sh4 processors should be really the best news... but apparently no great enthusiasm... is it fake?

Anyway, hope to get responses
cheers

 

[acer2]

No it is not fake. It works.The last one was version 3. But no so much stable, special after watch more than half one hour.

regards
acer2

 

[api]

This is a castrated mgcamd 1.35 sh4, sorry, no cccamd.

 

[tiesto80]

... back to my point... pple doesnt want to accept or is hard to believe that cccam could be running on ipbox....

ANYONE TRIED IT? Beta 4 is out ... and they say it is more stable...

Please write your comments if you managed to use cccam... also explain for others how to install it..

thanks

 

[grizzlyt]

It is a hacked Mgcamd and it only works with firmware images not Enigma 2.

Beta 4 works with the new Release.

 

[tiesto80]

... and now we got CCcam 2.1.4
http://www.sat-universe.com/showthread.php?t=180096

What the _____ is going on??? Has anyone tried it? Another fake version???

... I had enough with this

Please write your comments if you are using this cccam
Thanks,

 

[dorosk]

For me this is a great cam. It is fast, stable, and opens channels that others can not.
Each version is improving.
The name for me is not important, he can call it any thing he wants.
Good job Shahrooz

 

[jero87]

For me this is a great cam. It is fast, stable, and opens channels that others can not.
Each version is improving.
The name for me is not important, he can call it any thing he wants.
Good job Shahrooz

Heloo

CCcam 2.1.4 for CuberevoHD :rant

for me block recording and block with channel not working

 

[just4fun2]

For me this is a great cam. It is fast, stable, and opens channels that others can not.
Each version is improving.
The name for me is not important, he can call it any thing he wants.
Good job Shahrooz

stable it has the same pb like the other & mgcamd 1.35 with dgs sif img............ The only stable is oscam, no freezes, no blocking with E2 , alittle bit slowly with my cs but WORKING 200% thank to the team :thum:

 

[dorosk]

Every body knows that it is a hacked Mgcamd, so some of its problems are carried over and some are fixed. Over all it works better than Mgcamd.
So some people like it some don't. It depends on the overall setup of the system.

Regarding channel not working, just do some clean up of the data base, move channels that you watch at the beginning and this will mostly be avoided. It is an issue with the firmwares also.

Oscam is the most stable at the moment. Unfortunately it is difficult to set up for many people, and for me it has problems with some Irdedo channels, so I test it every now and then but I do not use it.

 

[just4fun2]

Hi dorosk, can we expect an E2 version or can we modify this one

 

[acdata]

CCcam 2.1.4 for CuberevoHD is it fake or real ?

 

[just4fun2]

CCcam 2.1.4 for CuberevoHD is it fake or real ?

The name is fake for shure because it is mgcamd based..but working (not stable 100%) with dgs sif img .
In my opinion the difference between mgcamd & this one are the scripts to control a little better the ecm ...the bin file seems to be the same

 

[dorosk]

Hi dorosk, can we expect an E2 version or can we modify this one

I haven't seen anything for an upcoming E2 version. Somebody can check in its forum for more info.

Some said it work by changing B to 9 or 6 but was not stable. Some testing will show.

 

[pringls]

are there CCcam Server for SH4 ?

 

[tatsaam]

CCCAM

HI MATES, CCCAM 2.1.4(PRE INSTALLED IN THE IMAGE) IS RUNNING WELL ON AB IPBOX 9000HD USING THE VODKA 0.6 IMAGE THAT HAS RECENTLY BEEN RELEASED. GREAT WORK AND THANKS TO THE PRODUCER(TANI1). YOU JUST NEED TO ADD YOUR C-LINE IN THE CCCAM.CFG FILE IN VAR/KEYS(RIGHT CLICK CCCAM.CFG, THEN CLICK EDIT, AND ADD YOUR C-LINE).HAVE FUN VIEWING. RED BUTTON=STARTS EITHER CCCAM OR MGCAM&NEWCS, GREEN BUTTON=STOP OR START CURRENT CAM.
TATSAAM

 

[m_jasour]

I haven't seen anything for an upcoming E2 version. Somebody can check in its forum for more info.

Some said it work by changing B to 9 or 6 but was not stable. Some testing will show.

you can download E2 version from here : PANEL_V3.0.rar
I have it on pkt 9.8 and it works great

HI MATES, CCCAM 2.1.4(PRE INSTALLED IN THE IMAGE) IS RUNNING WELL ON AB IPBOX 9000HD USING THE VODKA 0.6 IMAGE THAT HAS RECENTLY BEEN RELEASED. GREAT WORK AND THANKS TO THE PRODUCER(TANI1). YOU JUST NEED TO ADD YOUR C-LINE IN THE CCCAM.CFG FILE IN VAR/KEYS(RIGHT CLICK CCCAM.CFG, THEN CLICK EDIT, AND ADD YOUR C-LINE).HAVE FUN VIEWING. RED BUTTON=STARTS EITHER CCCAM OR MGCAM&NEWCS, GREEN BUTTON=STOP OR START CURRENT CAM.
TATSAAM

The cccam 2.1.4 on Vodka 0.5 and 0.6 is hacked mgcamd by Shahrooz.

 

[dtsamtani]

help

Hello,

This is Deepak from Valencia, Spain. Please help me out to set up my ab ipbox 9000hd for cccam. I am totally new to this world and I have no idea from where to statrt. I see that you know all about it. Thanks in advance.

HI MATES, CCCAM 2.1.4(PRE INSTALLED IN THE IMAGE) IS RUNNING WELL ON AB IPBOX 9000HD USING THE VODKA 0.6 IMAGE THAT HAS RECENTLY BEEN RELEASED. GREAT WORK AND THANKS TO THE PRODUCER(TANI1). YOU JUST NEED TO ADD YOUR C-LINE IN THE CCCAM.CFG FILE IN VAR/KEYS(RIGHT CLICK CCCAM.CFG, THEN CLICK EDIT, AND ADD YOUR C-LINE).HAVE FUN VIEWING. RED BUTTON=STARTS EITHER CCCAM OR MGCAM&NEWCS, GREEN BUTTON=STOP OR START CURRENT CAM.
TATSAAM

 

[triplex1]

cccam 214 working only for images Based on dgs firmware and not for e2 images.
last e2 image from satbox team named act_100 has inside emu cccam 214 but not working good,this isn't stable.
for ipbox the best emu for me is incubus and working very well

 

[Lemme345]

I really want to know how to install this too. I guess it is not enough just to copy the "var" folder. So how do you actually install it? I Have looked around for installation notes with no succes. Can some one please leave a link to installation notes or describe how to do it.