Here is the deal.
I just bought a Technomate 9100S and flashing a new image (Edge Nemesis 4.4) and installing CCcam was no problem. Works fine over the network with my Dreambox 7020 so CS definitely works. I did downloaded and installed the CCam trough the blue panel so I might have installed a CCcam file meant for the Dreambox. I am not sure if it makes any real difference but I saw in the CCcam section of this site that there is also a special 2.1.4 version posted for the TM9100S.
Now here is my problem: THE EMULATOR DOESN'T WORK WITH SOFTCAM KEYS:mecry:.
I double checked, tripple checked everything but I can't make CCcam look at the SoftCam. Key file, the Autoroll file and the constant.cw file in var/keys directory. I activated the lines in the Ccamconfig but all to no avail. Does anybody have any suggestions / solutions or similar experiences. I used the same config file as on the DM7020 (just altered the OSD username and OSD password) which by the way doesn't read the keys either. So I think it is rather a CCcam settings related problem than that it has anything to do with the boxes themselves.
Please have a look at my config:
# SERVER LISTEN PORT : #
SERVER LISTEN PORT : 12000
# ALLOW TELNET INFO : #
ALLOW TELNETINFO: no
# ALLOW WEB INFO : #
ALLOW WEBINFO: yes
# WEBINFO USERNAME : #
WEBINFO USERNAME :
# WEBINFO PASSWORD : #
WEBINFO PASSWORD :
# TELNETINFO USERNAME : #
TELNETINFO USERNAME :
# TELNETINFO PASSWORD : #
TELNETINFO PASSWORD :
# TELNET INFO LISTEN PORT : #
TELNETINFO LISTEN PORT : 16000
# WEB INFO LISTEN PORT : #
WEBINFO LISTEN PORT : 16001
# ZAP OSD TIME : #
ZAP OSD TIME :0
# OSD USERNAME : #
OSD USERNAME :******
# OSD PASSWORD : ******* #
OSD PASSWORD :
# OSD PORT : #
OSD PORT :80
# PHOENIX READER PATH : #
#SERIAL READER : /dev/sci1 phoenix
#SERIAL READER : /dev/sci0 phoenix
# EMM Blocker #
# SHOW TIMING : #
SHOW TIMING : yes
# DEBUG : #
DEBUG : yes
# NEWCAMD CONF : #
NEWCAMD CONF :no
# DISABLE EMM : #
DISABLE EMM : no
# EXTRA EMM LEVEL : #
EXTRA EMM LEVEL : yes
# Mini OSD #
MINI OSD : yes
# CAM KEY #
# CAMDATA #
# BOX KEY #
# BEEF ID : #
# PINCODE : #
# SOFTKEY FILE : #
SOFTKEY FILE : /var/keys/SoftCam.Key
# AUTOROLL FILE : #
AUTOROLL FILE : /var/keys/AutoRoll.Key
# STATIC CW FILE : #
STATIC CW FILE : /var/keys/constant.cw
# CAID PRIO FILE : #
CAID PRIO FILE : /var/etc/CCcam.prio
# LOG WARNINGS : #
LOG WARNINGS : /tmp/warnings.txt
# #
# LOADBALANCE : #
# TRY ALL CHIDS : #
# POSTINIT : #
# DVB API : #
# #
Your help is greatly appreciated.
Cheers.
I just bought a Technomate 9100S and flashing a new image (Edge Nemesis 4.4) and installing CCcam was no problem. Works fine over the network with my Dreambox 7020 so CS definitely works. I did downloaded and installed the CCam trough the blue panel so I might have installed a CCcam file meant for the Dreambox. I am not sure if it makes any real difference but I saw in the CCcam section of this site that there is also a special 2.1.4 version posted for the TM9100S.
Now here is my problem: THE EMULATOR DOESN'T WORK WITH SOFTCAM KEYS:mecry:.
I double checked, tripple checked everything but I can't make CCcam look at the SoftCam. Key file, the Autoroll file and the constant.cw file in var/keys directory. I activated the lines in the Ccamconfig but all to no avail. Does anybody have any suggestions / solutions or similar experiences. I used the same config file as on the DM7020 (just altered the OSD username and OSD password) which by the way doesn't read the keys either. So I think it is rather a CCcam settings related problem than that it has anything to do with the boxes themselves.
Please have a look at my config:
# SERVER LISTEN PORT : #
SERVER LISTEN PORT : 12000
# ALLOW TELNET INFO : #
ALLOW TELNETINFO: no
# ALLOW WEB INFO : #
ALLOW WEBINFO: yes
# WEBINFO USERNAME : #
WEBINFO USERNAME :
# WEBINFO PASSWORD : #
WEBINFO PASSWORD :
# TELNETINFO USERNAME : #
TELNETINFO USERNAME :
# TELNETINFO PASSWORD : #
TELNETINFO PASSWORD :
# TELNET INFO LISTEN PORT : #
TELNETINFO LISTEN PORT : 16000
# WEB INFO LISTEN PORT : #
WEBINFO LISTEN PORT : 16001
# ZAP OSD TIME : #
ZAP OSD TIME :0
# OSD USERNAME : #
OSD USERNAME :******
# OSD PASSWORD : ******* #
OSD PASSWORD :
# OSD PORT : #
OSD PORT :80
# PHOENIX READER PATH : #
#SERIAL READER : /dev/sci1 phoenix
#SERIAL READER : /dev/sci0 phoenix
# EMM Blocker #
# SHOW TIMING : #
SHOW TIMING : yes
# DEBUG : #
DEBUG : yes
# NEWCAMD CONF : #
NEWCAMD CONF :no
# DISABLE EMM : #
DISABLE EMM : no
# EXTRA EMM LEVEL : #
EXTRA EMM LEVEL : yes
# Mini OSD #
MINI OSD : yes
# CAM KEY #
# CAMDATA #
# BOX KEY #
# BEEF ID : #
# PINCODE : #
# SOFTKEY FILE : #
SOFTKEY FILE : /var/keys/SoftCam.Key
# AUTOROLL FILE : #
AUTOROLL FILE : /var/keys/AutoRoll.Key
# STATIC CW FILE : #
STATIC CW FILE : /var/keys/constant.cw
# CAID PRIO FILE : #
CAID PRIO FILE : /var/etc/CCcam.prio
# LOG WARNINGS : #
LOG WARNINGS : /tmp/warnings.txt
# #
# LOADBALANCE : #
# TRY ALL CHIDS : #
# POSTINIT : #
# DVB API : #
# #
Your help is greatly appreciated.
Cheers.