Cams in Blackpole

[joe6915]

Cams not showing up in Blackpole?
I have installed cams using tspanel and they are showing up in that but cannot start them in blackpole softcam start page.

 

[Ferret]

Ive not yet tried this image mate so im not really sure i have any advice but i take it you have tried the Blackhole image cams ?

 

[oktay35]

Strange Blackhole Team Block all Plugins like tspanel or LSK Plugin.You can not Download any Cam with this Plugins.So this Image goes in my Trash Folder.

bye

 

[^G@w@in^]

You can use cams in the same way with Black Pole and Black Hole

 

[joe6915]

Strange Blackhole Team Block all Plugins like tspanel or LSK Plugin.You can not Download any Cam with this Plugins.So this Image goes in my Trash Folder.

bye

I got them installed under Emumanager in Tspanel.
Did not try blackhole cams as i read Blackpole is based on PLI.

 

[bellof]

blackhole cams 100% working!
tested 100% also you can see in my BU image!

have a look here:
http://www.sat-universe.com/showthread.php?t=217482

 

[oktay35]

Blackhole Cams Manual Install working OK.But you can not Download and Install Cams with LSK and TSpanel Plugins.It was Blocked from Image.

bye

 

[Ferret]

Blackhole Cams Manual Install working OK.But you can not Download and Install Cams with LSK and TSpanel Plugins.It was Blocked from Image.

bye

I guess blocking these is in responce to some teams converting the Blackhole images to work on dreamboxes.

Pitty the TSpanel is good support for their image, i guess thats what happens when you go from a hobby group to a been paid help for by a manufacturer.

 

[Jimdefruit]

With BlackPole image, the cams are the same as Blackhole ie.
/usr/camscript/script in the form NCam_Oscam_CCcam.sh
/usr/bin/oscam
/usr/bin/cccam
/var/etc/cccam.cfg
/var/etc/tuxbox/config/oscam.conf
/var/etc/tuxbox/config/oscam.server
/var/etc/tuxbox/config/oscam.user

Obviously change the cam to whatever you wish, you dont have to use oscam and cccam.
Just ftp the files to the VU+ and dont forget to change attributes for the bin and camscript files.

 

[bellof]

amigo if you had checked this out,you had noted that tuxbox-folder have a new location in Black pole image!

if you only copy files to tuxbox-folder it wont work without activated "search for configs" function in oscam,or doing the right symlink in the image!(or create new tuxbox-folder at the old place)

 

[ja5on]

Blackhole Cams Manual Install working OK.But you can not Download and Install Cams with LSK and TSpanel Plugins.It was Blocked from Image.

bye

That not true as i have cam installed with tspanel!
Rss feeds work aswell but cant access any plugin from addons. Real shame thats as the image will have to go lol

 

[Jimdefruit]

I assume you are referring to my post. Tuxbox is in the location I have posted, but there are shortcuts to it from other locations.

 

[raketa]

All,
understood nothing of the writing

 

[ja5on]

tspanel is working now in new version 0.1.3 if you wanna try it

 

[arch_carrier]

Are there any extra requirements for installing cams on BlackPole as compared to the Blackhole images? I've tried both 0.1.2 and 0.1.3 recently and same scenario. The JSC Irdeto card in my top slot is showing as clearing and reading from that card slot but no picture or sound. The Cyfra card in the bottom slot works fine. I tried both methods - by installing Oscam 6306+CCCam 2.13 BH.TGZ file from the Blackhole section here and by installing TSPanel and installing Oscam+CCCam from there. Then I put my cccam.cfg in var/etc and the oscam config files in var/etc/tuxbox/config folder which was created automatically when installing from the BH.TGZ file.

The same method works perfectly on the BlackHole images and both cards read fine. Gone back to BlackHole for now but would like to use BlackPole if I can sort that issue out. BTW this is the VU+ Ultimo version I'm referring to but I would expect installing CAMS is just the same.

 

[Brummie]

i thought the image was based on OpenPli so does it not have to use pli cams ....????? i may be wrong though

 

[ATTILA]

Simply load the cam of the BH also in Bpole operation the same activation key with blue ... li downloaded from panel TS or as panel replicates .... a greeting

 

[ATTILA]

I am sorry i just upload the cam of the BH also in BPloe operation the same greetings sorry but I do not know English i used the translator

 

[bellof]

Are there any extra requirements for installing cams on BlackPole as compared to the Blackhole images? I've tried both 0.1.2 and 0.1.3 recently and same scenario. The JSC Irdeto card in my top slot is showing as clearing and reading from that card slot but no picture or sound. The Cyfra card in the bottom slot works fine. I tried both methods - by installing Oscam 6306+CCCam 2.13 BH.TGZ file from the Blackhole section here and by installing TSPanel and installing Oscam+CCCam from there. Then I put my cccam.cfg in var/etc and the oscam config files in var/etc/tuxbox/config folder which was created automatically when installing from the BH.TGZ file.

The same method works perfectly on the BlackHole images and both cards read fine. Gone back to BlackHole for now but would like to use BlackPole if I can sort that issue out. BTW this is the VU+ Ultimo version I'm referring to but I would expect installing CAMS is just the same.

have you had a look at webif oscam???
oscam running??

because tuxbox folder is at another place at black pole!
not same place as in BH image!

you need a extra symlink to fix that,or you create folders at the "normal"place!
but for me the betterversion is to set the symlink!
because 2 tuxbox files in one image cant be helpfull!

 

[^G@w@in^]

All the files are in the same place as jimdefruit says, all you have to do is edit the camscript to tell the emu where your config files are.
CCcam
-C <configfile> use <configfile> instead of default (/etc/CCcam.cfg)

/usr/bin/CCcam_2.30 -c /etc/CCcam.cfg >/dev/null &

Oscam
-C <configfile> use <configfile> instead of default (/etc/tuxbox/config)

/usr/bin/oscam -c /etc/tuxbox/config >/dev/null &