boxman image in flash on dm 7000

[thor_]

How to install boxman image on DM 7000 with nullmodem cabel???

Any turtoial

For now i try with null modem cabel but i only see :

flash image 2.6.9


Thanks

 

[boxgot]

Are you trying to flash the box with DreamUP and null modem cabel?

 

[thor_]

:9

yes with null modem cabel

 

[Ferret]

With a Null cable do it like this!


1 Before making any connections from your Pc to the 7000 switch off both your 7000 and PC.

2 Start universal DreamUp and make sure the Use Network option is unticked.

3 Now select your serial com port and then click connect, a status massage will be displayed saying the connections prepared now switch on the Dreambox.

4 Now select Flash and point DreamUp to were you have your unrared Eagle V3 image and click open, the upload will now start. This will take around 12 minutes.

5 After the flash has completed click disconnect and power down then power up the box.

Connect it back up to your TV etc and power up.

Ferret

 

[thor_]

:9

Thanks

And how to make with flashwizard, to put boxman image on flash?

It is possible?

 

[boxgot]

"To put boxman image on flash"with flashwizard you need a lan crossover cable.

 

[thor_]

:9

I do with null modem cabel on this way

1. I flash Gemnini image on Flash(becouse if i flash boxman image my DM does not recognized usb stick)
2.then i install gemini on multiboot
3.then i install eraze image with null modem cabel and then boxman image

But another step is how to flash boxman image with flashwizards...

:thum: