william-1
Feed Hunter
- Messages
- 4,382
Blind scan receivers for feed hunting: part-2
I have been testing the latest software for the TM5302HD here is my report after the recent upgrade,
Download file #1 : Phantompatch-HD_5302_24AUG2012.tbn (5.4MB)
Good work by all at TM to achieve this improved level of a blind scan receiver,
Blind search functions ok now you can choose start & stop search working again,
(use one polarity at a time for more reliable blind scans,)
Satellite names list has been updated without corrupting the blind scan this issue,
I have tested the Blind scan on 16 east,10 east,3 east,24.5 west all active Ku band transponders found.
All new transponders go into the database in sequence as with previous issue,
Tuner loop out at OFF = On to loop through to another tuner (so not a problem that needs sorting) as I have got used to this,
TS info is the best of any non professional HD satellite receiver:
Pressing info button x1 to get satellite,frequency,polarization,symbol rate,modulation (S1 S2)FEC + CAS type,
Press info button x2 then press the blue button to show all Video & audio data such as MPEG-2 MPEG-4 & bit rates,
Press info button x2 then press the yellow button for Network id video & audio pids DVB & Modulation type,Frequency,Symbol Rate & FEC + CAS type.
Additional features that have proved very useful is the ability of the TM5302HD to delete all transponders in advanced search this makes blind searching much easier starting will an empty data base for quicker blind scans of the active part of the Ku band 10950 to 11200 + 11450 to 11700 + 12500 to 12750 + the capability to search any part of the Ku band & C band,
(This receiver is an ideal candidate to re issue at a later date with 4:2:2 capabilities + Codex,)
Currently this my receiver of choice when compiling satellite charts for flysat & lyngsat so the latest upgrade to the blind scan has proved very useful.
I have been testing the latest software for the TM5302HD here is my report after the recent upgrade,
Download file #1 : Phantompatch-HD_5302_24AUG2012.tbn (5.4MB)
Good work by all at TM to achieve this improved level of a blind scan receiver,
Blind search functions ok now you can choose start & stop search working again,
(use one polarity at a time for more reliable blind scans,)
Satellite names list has been updated without corrupting the blind scan this issue,
I have tested the Blind scan on 16 east,10 east,3 east,24.5 west all active Ku band transponders found.
All new transponders go into the database in sequence as with previous issue,
Tuner loop out at OFF = On to loop through to another tuner (so not a problem that needs sorting) as I have got used to this,
TS info is the best of any non professional HD satellite receiver:
Pressing info button x1 to get satellite,frequency,polarization,symbol rate,modulation (S1 S2)FEC + CAS type,
Press info button x2 then press the blue button to show all Video & audio data such as MPEG-2 MPEG-4 & bit rates,
Press info button x2 then press the yellow button for Network id video & audio pids DVB & Modulation type,Frequency,Symbol Rate & FEC + CAS type.
Additional features that have proved very useful is the ability of the TM5302HD to delete all transponders in advanced search this makes blind searching much easier starting will an empty data base for quicker blind scans of the active part of the Ku band 10950 to 11200 + 11450 to 11700 + 12500 to 12750 + the capability to search any part of the Ku band & C band,
(This receiver is an ideal candidate to re issue at a later date with 4:2:2 capabilities + Codex,)
Currently this my receiver of choice when compiling satellite charts for flysat & lyngsat so the latest upgrade to the blind scan has proved very useful.
Last edited: