Biss in OSCAM How To?

[vhfuhf]

I read that OSCAM dupports Biss from the softcam.key file in Var/Keys. How do I properly load configure the keys?

BISS/ConstCW config
===================

Syntax for keys in SoftCam.Key: (key number can be '00' or '01')
F <service id><ecm pid> <key number> <key>

Example:

service id: 2222
ecm pid: 1111
key: 0102030405060708

F 22221111 00 0102030405060708

Important:
The correct ecm pid is only available when using oscam dvbapi.
For example:
oscam (dvbapi) <-> OSEmu
oscam (dvbapi) <-> oscam <-> OSEmu

When using another client like cccam, the ecm pid seen by OSEmu will always be '1FFF'
For example:
cccam <-> oscam <-> OSEmu
cccam <-> OSEmu
In this case the above example key line needs to be changed to:
F 22221FFF 00 0102030405060708

I have tried all the possible formats and nothing is working ... when using cccam <-> oscam <-> OSEmu or cccam <-> OSEmu how do you configure this?

 

[oys]

Oscam keys for emu takes from a file oscam.keys

 

[vhfuhf]

Is it suppose to be softcam.key? I though OSCAM supports softcam.key files in VAR./KEY

what is the format of oscam.key for biss?

 

[briosa]

Use the same format as you use in SoftCam.key, but in oscam.keys. Works well.:thum:

 

[technodvl2]

in server

this is and known woking


[reader]
label = biss-reader
enable = 1
protocol = constcw
device = /usr/keys/oscam.keys
key = 0102030405060708091011121314
reconnecttimeout = 0
caid = 0100,0500,0600,1800,0D00,2600,4A00,FF00,090F,093E
fix9993 = 0
group = 1
lb_weight = 100

or this

[reader]
label = biss
protocol = constcw
device = /usr/keys/constant.cw
caid = 2600
group = 1

keys here
http://www.sat-universe.com/showthread.php?p=2036641156#post2036641156

in var/keys

you can change the keys directory to suit in device in reader

 

[briosa]

Don`t forget that normally keys go to usr/tuxbox/config/oscam.keys...It`s not the same as the other emus...The others, yes, normally it`s like you say:var or usr/keys. With oscam, normally is usr/tuxbox/config...and in config you have all the oscam folders...:thum:

 

[technodvl2]

Don`t forget that normally keys go to usr/tuxbox/config/oscam.keys...It`s not the same as the other emus...The others, yes, normally it`s like you say:var or usr/keys. With oscam, normally is usr/tuxbox/config...and in config you have all the oscam folders...:thum:

normally ?

anywhere you decide as long as you let it be known in device like i said above

in config
in var/keys

let the device know

oscamYmod will work
not too sure in normal oscam
please let us know







if your using OSCam emu for powervu

these are best

[reader]
device = 127.0.0.1,11000
label = OSEmu
caid = 0D05,0D95,0D00,0D02,090F,0500,1801,0604,2600,FFFF,0648
protocol = cs357x
ident = 0D05:000000,0D95:000000,0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;
group = 1
emmcache = 1,1,2,1

[reader]
device = 127.0.0.1,11000
label = OSEmu-BISS
caid = 2600,FFFF
protocol = cs357x
group = 1
emmcache = 1,1,2,1

the key file in var/keys

 

[briosa]

Well, right, only I thought you have oscamYmod, that the one I use for BBCs. I changed the oscam .bin file with oscamYmod, I added the 3 files bbc_pmt, and I have BBCs working fine for a long time...So, you are right, I was talking about oscamYmod...
PS
You need to delete PMs in your PM folder...

 

[technodvl2]

Well, right, only I thought you have oscamYmod, that the one I use for BBCs. I changed the oscam .bin file with oscamYmod, I added the 3 files bbc_pmt, and I have BBCs working fine for a long time...So, you are right, I was talking about oscamYmod...
PS
You need to delete PMs in your PM folder...

obrigado briosa

 

[sarfraaz184]

Ptv Sports
PAKSAT_1R_38.E
FREQ:4005 V 15555
SID:0004
BISS kiy: 51 32 13 AA 9A DD EC AA
Or
Biss kiy: 51 32 13 96 42 C2 5A 63
please configer for oscam i treid on oscam-ymod v 1856 but this chanal not open in oscam server
[reader]
device = 127.0.0.1,11000
label = OSEmu-BISS
caid = 2600,FFFF
protocol = cs357x
group = 1
emmcache = 1,1,2,1
please expert gude me how can i open this chanal

 

[bounguine]

in server
[reader]
label = biss-reader
enable = 1
protocol = constcw
device = /usr/keys/oscam.keys
key = 0102030405060708091011121314
reconnecttimeout = 0
caid = 0100,0500,0600,1800,0D00,2600,4A00,FF00,090F,093E
fix9993 = 0
group = 1
lb_weight = 100

or this

[reader]
label = biss
protocol = constcw
device = /usr/keys/constant.cw
caid = 2600
group = 1

Do I have to add newcamd port in oscam.conf and account in oscam.user or it's working only through dvbapi?

 

[splc]

Biss keys with Oscam.

I was able to open Biss key channels in Thaicom 5/6 with Oscam patched version for PowerVu Oscam 120/11107.I used reader in Oscam.server ,

[reader]
label = oscam.constant.cw
protocol = constcw
device = /etc/tuxbox/config/oscam.constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000 ;4AE1:000000
group = 3 ( Whatever groupNo. according to your number of readers.)

In Notepad
Make a constant.cw file with all Biss keys.
This file is as same as constant.cw.
(Example-2600:000000:0194:00CC:1FFF::97 C0 69 C0 AB 73 22 40 97 C0 69 C0 AB 73 22 40 )
Rename the file as "oscam.constant.cw"
"FTP into etc/tuxbox/config".
That is all. i tested this on DM800se with BlackHole 2.17 Good luck

 

[sat lover]

how to enter manually biss feed keys on dm 800 running oscam?

 

[sat lover]

biss keys must have this syntax on oscam:F <service id><ecm pid> <key number> <key>
how can we find service id and ecm pid on a feed uses biss key?

 

[uglylove]

how to enter manually biss feed keys on dm 800 running oscam?

You need to install dreamexplorer to your rec. from feed or ipk file.
After that you can edit your softcam.key or oscam.key files with it. When you finished your enter, you need to restart oscam for activation of new keys. That's all.:thum:

 

[uglylove]

biss keys must have this syntax on oscam:F <service id><ecm pid> <key number> <key>
how can we find service id and ecm pid on a feed uses biss key?

From oscam log you can determine SERVICE ID and ECMPID.

2017/01/11 12:12:17 15413D28 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 098C ECM_PID: 1AB6 PROVID: 000000 
2017/01/11 12:12:17 15413D28 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000 
2017/01/11 12:12:17 15413D28 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 09AF ECM_PID: 1FB6 PROVID: 000000 
2017/01/11 12:12:17 15413D28 c   (dvbapi) Demuxer 0 found 3 ECMpids and 3 STREAMpids in caPMT
2017/01/11 12:12:17 15413D28 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 098C PROVID 000000 ECMPID 1AB6 ANY CHID PMTPID 0064 VPID 04FF
2017/01/11 12:12:18 15413D28 c   (dvbapi) Demuxer 0 found 3 ECMpids and 3 STREAMpids in PMT
2017/01/11 12:12:18 15413D28 c      (ecm) dvbapiau (098C@000000/025B/0083/9D:983C9449E6B74C0D7F657D22E0AA0F7D): cache3 (104 ms) by Turbo_Hd (C/1/2/2) - Sky Cinema HD
2017/01/11 12:12:30 3F0A9EE5 p  (constcw) Searching CW for CAID 098C PROVID 000000 SRVID 0083 ECMPID 1AB6 PMTPID 0064 VPID 04FF

 

[sat lover]

Ok thank you,i ll try and report

Στάλθηκε από το HUAWEI VNS-L21 μου χρησιμοποιώντας Tapatalk

 

[odin8]

oscam generator: http://kos.hdsat.pl/menu-20.html

 

[dxn]

what file use oscam emu for keys?

Softcam.key or oscam.key?

 

[Flippers]

Softcam.key but for biss also constant.cw