Barry Allen Latest Version
- Thread starter Rocknroll
- Start date
- Messages
- 10,198
Barryallen 4.8.17
Thanks gutemine
Code:
Barry Allen for Dreambox 7025, 800, 8000
2) Installation
First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).
If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.
If not, then install Barry Allen by entering the
following commands in a Telnet session:
cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk
Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.
In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.
And you can remove Barry Allen if you are booted
from Flash:
ipkg remove enigma2-plugin-extensions-barryallen
3) Usage
There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.
For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)
If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:
cd /media/ba
ba.sh extract nameoftheimage
On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.
The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.
====================================================
Have Fun using Barry Allen on the Dreambox !!!!
====================================================Thanks gutemine
Barryallen 4.8.18
Enigma 2
Gracias a SiennaRoot
Enigma 2
Gracias a SiennaRoot
Code:
Ich denke das mit den Link wurde schon kreuz & quer diskutiert ...
sind dann die Fälle wie keine interne HDD, nur ext USB HDD oder NAS etc. ...
Wie auch immer stelle ich hier jetzt eine BA 4.8.18 rein, wo der
- Filesystemcheck CF / USB / HDD wieder geht
dabei sind am Ende auch die Netzwerkmounts wieder Einsatzbereit,
also man muss nicht mehr unbedingt Neustarten
Natürlich geht der Filesystemcheck nur vom Flashimage aus.
Falls das überhaupt noch gebraucht wird :
- das Formatieren des CF & USB (BA) devices
und zuletzt das "bainit 110 / 120" : dumpen tut es wieder ...
Getestet habe ich auf 8c und 8k mit OoZooN & Gemini2 4.30.- Messages
- 10,198
Barryallen 4.8.19
Thanks gutemine
Code:
Barry Allen for Dreambox 7025, 800, 8000
2) Installation
First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).
If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.
If not, then install Barry Allen by entering the
following commands in a Telnet session:
cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk
Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.
In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.
And you can remove Barry Allen if you are booted
from Flash:
ipkg remove enigma2-plugin-extensions-barryallen
3) Usage
There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.
For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)
If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:
cd /media/ba
ba.sh extract nameoftheimage
On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.
The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.
====================================================Thanks gutemine
Last edited:
Barryallen 4.8.20
Code:
In the 4.8.20 is in / media / ba / bin now also tune2fs is binary (so that you can convert ext2 to ext3 and vice versa, filesystemcheck off, and even the file a label type)
BA and the other commands in Webif should now even a little better against the danger Kinesiche secured
Thx gutemine- Messages
- 10,198
Barryallen 4.8.23
Thanks gutemine
Code:
Barry Allen for Dreambox 7025, 800, 8000
2) Installation
First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).
If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.
If not, then install Barry Allen by entering the
following commands in a Telnet session:
cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk
Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.
In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.
And you can remove Barry Allen if you are booted
from Flash:
ipkg remove enigma2-plugin-extensions-barryallen
3) Usage
There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.
For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)
If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:
cd /media/ba
ba.sh extract nameoftheimage
On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.
The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.
====================================================Thanks gutemine
- Messages
- 10,198
Barry Allen 4.8.25
Code:
Take look at the 4.8.25 from the Annex if so at least the installation on a 8000 with .30 kernel in the flash goes
for everything else can not (yet) does not guarantee - try just the same image with BA in the BA device unpack (then go without WW) to see if it works and it boots.
Because of the new / dev can be a lot different not only go to be painstakingly debugged. And the Serbian support is not finished yet, so far has only .25 for the sample to the most necessary things are debugged, then only a .26 back at the beginning of the thread.