2 servers (different clines) on 1 cccam.cfg
- Thread starter wwatfa
- Start date
If you have a server with the same providers & many peers the faster is sollicited & this can make freezes.I have 2 lines,1 mediaguard/nagra/via privat with c+ HD & 0 freezes, the 2 line privat with many providers & many peers but with micro freezes..
The line 2 is ever the first to decode
The best way at moment in my opinion is to use BH img because you have autocam & this mean you can assigne different cams to providers, example: *** with oscam,mediaguard with cccam viaccess with mgcamd
Maybe other solution
If you have a server with the same providers & many peers the faster is sollicited & this can make freezes.I have 2 lines,1 mediaguard/nagra/via privat with c+ HD & 0 freezes, the 2 line privat with many providers & many peers but with micro freezes..
The line 2 is ever the first to decode
The best way at moment in my opinion is to use BH img because you have autocam & this mean you can assigne different cams to providers, example: *** with oscam,mediaguard with cccam viaccess with mgcamd
Maybe other solution
well said m8 :thum::thum::thum::clapping:
If you have a server with the same providers & many peers the faster is sollicited & this can make freezes.I have 2 lines,1 mediaguard/nagra/via privat with c+ HD & 0 freezes, the 2 line privat with many providers & many peers but with micro freezes..
The line 2 is ever the first to decode
The best way at moment in my opinion is to use BH img because you have autocam & this mean you can assigne different cams to providers, example: *** with oscam,mediaguard with cccam viaccess with mgcamd
Maybe other solution
agree with u
but again the quality of peers are the important issue.
if both servers were good, they will complement each other and it would be really great. if peers from other sever are not good they will spoil these providers.
One nice tool to control which provider opens with which server is to use OSCam_ymod.
it can handle clines without problems + you can control ( through CAID) which provider opens with which server
example
in the example SKY DE (CAID 1702)channels would be handled through server 1 where as D+ channels (CAID 1810)would be handled through server 2...and so on
u can use " , " to separate different provider on the same server.
Again, with 2 good server u just put the 2 lines in the cccam.cfg and enjoy
For the autocam it is very simple,choose a channel, blue panel, choose autocam, add the channel & so on
for the link, take a look on vu+ images section, there is many BH backup or not of the BH
satmanbasil
Member
- Messages
- 65
using multi cccam
hi mate
im using the vu+ duo with vix image with this image you can store multiable cccam.cfg files in var/etc like this cccam_1.cfg
cccam_2,cfg, this enables me to use different servers without having to worry which one is decrypting the channel. it stops cccam from maybe showing a server with few freeze instead of a rock solid one. all you do once set up is press blue button select cccam then menu to select which server you wish to use on the channel ur watching.
regards
satmanbasil
hi mate
im using the vu+ duo with vix image with this image you can store multiable cccam.cfg files in var/etc like this cccam_1.cfg
cccam_2,cfg, this enables me to use different servers without having to worry which one is decrypting the channel. it stops cccam from maybe showing a server with few freeze instead of a rock solid one. all you do once set up is press blue button select cccam then menu to select which server you wish to use on the channel ur watching.
regards
satmanbasil
Hi, the function is in cccam info & do you mean that cfg_0, cfg_1, cfg_2 .... is auto actived depending the encryption? if yes, so the pb is resolved with a good prio list, right?
satmanbasil
Member
- Messages
- 65
re CCcam
Hi mate
the CCcam_1.cfg - - - CCcam_2.cfg you can assign a cline to or combination of clines to each then when you only want to see service from certain server you simply select the CCcam_1.cfg ..CCcam_2.cfg you require in the vix setup you press blue button the CCcam info then select menu you will see the config files you made by pressing the blue button you can view onscreen the config file to check you have the one you need then simply press ok a tick will appear in the check box and then press green to activate that config file.
You can check all is well by going back into the CCcam info and check server details it should confirm its running.
With your piro list make sure it has all the channels the CCcam config file will use it regardless of which one you choose
regards
Hi mate
the CCcam_1.cfg - - - CCcam_2.cfg you can assign a cline to or combination of clines to each then when you only want to see service from certain server you simply select the CCcam_1.cfg ..CCcam_2.cfg you require in the vix setup you press blue button the CCcam info then select menu you will see the config files you made by pressing the blue button you can view onscreen the config file to check you have the one you need then simply press ok a tick will appear in the check box and then press green to activate that config file.
You can check all is well by going back into the CCcam info and check server details it should confirm its running.
With your piro list make sure it has all the channels the CCcam config file will use it regardless of which one you choose
regards
hi mate,
i don´t even have a vu+ box, but i can tell you, that you make it far to complicate. if u only a cccamclient not a server, just put both clines in one configfile. the reason for your freeze is the server you use is not good enough or not stable. there is nothing you can do about with any config. maybe search a bit on other sites, and ask someone with a payserver for a testline. add the third cline to the other two in only one config. and you will see the difference.
i don´t even have a vu+ box, but i can tell you, that you make it far to complicate. if u only a cccamclient not a server, just put both clines in one configfile. the reason for your freeze is the server you use is not good enough or not stable. there is nothing you can do about with any config. maybe search a bit on other sites, and ask someone with a payserver for a testline. add the third cline to the other two in only one config. and you will see the difference.
You´re right & it is the reason
example the server 1 with only c+ is 100% ok
but the server 2 with c+, sky or other is not..but when you need to watch c+, the server 2 open the channels before the server 1
Now i use the cccam info swicth but it was better if it was AU
cheers