TNT Sat - Oscam + CCCam

tpetkov · Apr 30, 2017

Hi, I'm new to the forum and don't have access to gbox forum.
I have tried with scam 3.59 and 3.60 but it is still showing #701 in oscam.
Can anybody suggest what to do for getting gbox 8.11?

makkabaeus · Apr 30, 2017

stareca_bg said:
use gbox811 for update FFF400 ! 30-40 min !
after update use oscam !
2017/04/30 15:16:06 761D8A64 c (ecm) xxxx (0500&030B00/1318//2457/15C): found (269 ms) by TNTSat (L/1/6/8) - M6

Is in gbox a special configuration necessary. If so, could you please post the best configuration? Thanks in advance.

Motogato · Apr 30, 2017

Two hours with gbox and nothing happened....

valentino50 · Apr 30, 2017

I don't know how many time I have to repeat it?
There are no solution at the moment.
Those are fake solutions posted by new members which are misleading genuine members.
Once again don't waste you time.

tpetkov · Apr 30, 2017

I have tried with gbox811 on TF1 and sometimes there is this message:
Blocked Seca SA EMM on card 1

Felli71 · Apr 30, 2017

Those are fake solutions posted by new members which are misleading genuine members

OK, i have make wrong patch of scam, mgcamd, predator, didem, cerebro, daytona, opos, gold, fun .... nothing work?

@ valentino50
Please post log from gbox!

Adam792 · Apr 30, 2017

zeeteefje said:
What seems to work is updating in a Viaccess CI module. Even though TNTSAT viacess modules do not exist, general Viaccess CI modules appear to update the card.

I can confirm this!

I have a TNTSat v5 card (from 2016, valid til 2020) which has not been working in OSCam due to the change. I do not have an official TNTSat HD receiver (my only receiver was an SD Strong 6410 from 2008 which I got rid of last year!)

I have a Fransat Neotion Viaccess Orca CI+ module. I put the TNTSat card in this and tuned to M6 on 19.2°E for fifteen minutes. The CAM gives an on-screen message of "You do not have the rights to view this channel", but now I have my card back in OSCam, the channels are all clearing perfectly!

Code:

2017/04/30 23:19:54 50406B65 c (ecm) tvheadend (0500@030B00/1318/2329/15C:DBEDD8B68AB2E9FC97D3BA539BB163B9): found (284 ms) by TNTSat - TF1

valentino50 · May 1, 2017

Felli71 said:
OK, i have make wrong patch of scam, mgcamd, predator, didem, cerebro, daytona, opos, gold, fun .... nothing work?

@ valentino50
Please post log from gbox!

Well. This time you made it wrong. so many members were asking for a Genuine answer, until now nothing. I for MYSELF challenge you to resolve this problem . otherwise any messages been posted were bull sh"t.

Prove me wrong MR mgcam. Predator, didem.....and all that bull shi"t

THERE IS NO SOLUTION FOR TNTsat CARD PLEASE DO NOT TRY ANY OF CAMs which has been polluted on this thread cause IT DOES NOT WORK

PS: even for those who said its working..BE AWARE . THOSE ARE FAKE

valentino50 · May 1, 2017

Adam792 said:
I can confirm this!

I have a TNTSat v5 card (from 2016, valid til 2020) which has not been working in OSCam due to the change. I do not have an official TNTSat HD receiver (my only receiver was an SD Strong 6410 from 2008 which I got rid of last year!)

I have a Fransat Neotion Viaccess Orca CI+ module. I put the TNTSat card in this and tuned to M6 on 19.2°E for fifteen minutes. The CAM gives an on-screen message of "You do not have the rights to view this channel", but now I have my card back in OSCam, the channels are all clearing perfectly!

Code:

2017/04/30 23:19:54 50406B65 c (ecm) tvheadend (0500@030B00/1318/2329/15C:DBEDD8B68AB2E9FC97D3BA539BB163B9): found (284 ms) by TNTSat - TF1

Obviously. you are out of the equation

valentino50 · May 1, 2017

IN the end of the day to ALL members DO NOT put on your DM or VU what those HACKERS try to make you do.
Bless you all

pcca-matrix · May 1, 2017

Felli71 said:
Please post log from gbox!

Code:

Viaccess EMM response: 90 40
===== Via EMM on CaID 0x0500, pid 0x168C ======
prov: FFF40, MKey: 03
-EMM-------------------------------------------
8B 70 8D 90 03 FF F4 03 92 08 E6 43 20 0B 3D 2C
EC 30 81 72 B4 97 59 C6 6A 0E 58 67 52 5A 10 4C
D6 42 C2 10 1B F6 F4 3C 63 C0 D5 D6 F3 2F C1 C9
77 22 DF C1 81 F1 66 A8 1B 89 3D F3 05 51 2D 94
D1 52 E8 49 1A AC 99 15 FC 98 38 E0 8A 51 67 D4
30 2A 16 ED CF 90 C6 6F C5 45 4D 8E E6 5F 25 CD
D4 37 E7 9E 71 CC 91 BA 64 C8 40 F8 11 B1 1D 83
38 73 1D 86 DA FC AD 50 15 6B 7B FA 98 93 0D 2E
19 02 DD 64 96 43 F0 08 E3 59 42 F2 47 0F EF 78
already selected card 1
-Send to card 1  -----------------------------
CA 1C 00 03 88 92 08 E6 43 20 0B 3D 2C EC 30 81
72 B4 97 59 C6 6A 0E 58 67 52 5A 10 4C D6 42 C2
10 1B F6 F4 3C 63 C0 D5 D6 F3 2F C1 C9 77 22 DF
C1 81 F1 66 A8 1B 89 3D F3 05 51 2D 94 D1 52 E8
49 1A AC 99 15 FC 98 38 E0 8A 51 67 D4 30 2A 16
ED CF 90 C6 6F C5 45 4D 8E E6 5F 25 CD D4 37 E7
9E 71 CC 91 BA 64 C8 40 F8 11 B1 1D 83 38 73 1D
86 DA FC AD 50 15 6B 7B FA 98 93 0D 2E 19 02 DD
64 96 43 F0 08 E3 59 42 F2 47 0F EF 78
card 1 response in 228 ms
Viaccess EMM response: 90 40
already selected card 1

valentino50 · May 1, 2017

Be careful like I said new members posting.
I wonder why the Mod , does not banned them .
WARNING?!

valentino50 · May 1, 2017

Another new member posting spam

BE CAREFUL to all Genuine members. I can not believe how comes Moderators does not ban them ??/

valentino50 · May 1, 2017

I bet I will be the one who's gonna be banned for telling the truth. :mecry:

charmb · May 1, 2017

Good morning everybody,

After I tried to compile Oscam myself for half a day yesterday (and finally managed to) I tried the (promising) proposal by WASSERWAAGE to change the source code (page 16/17).
Unfortunately this didn't work for me.

Luckily I have a Fransat CI+ module, so I just put in my TNTsat card - and Yes: The trick worked for me, too.
So, thanks zeeteefje and Adam792!

Adam792 · May 1, 2017

I think the fact that the Fransat module (or any other Viaccess CI+) is official Viaccess must be enough to let the updates go through to the card.

I wonder if OSCam can be updated one day to handle these Viaccess updates correctly!

Sent from my iPhone using Tapatalk

Liegeois · May 1, 2017

Adam792 said:
I can confirm this!

I have a TNTSat v5 card (from 2016, valid til 2020) which has not been working in OSCam due to the change. I do not have an official TNTSat HD receiver (my only receiver was an SD Strong 6410 from 2008 which I got rid of last year!)

I have a Fransat Neotion Viaccess Orca CI+ module. I put the TNTSat card in this and tuned to M6 on 19.2°E for fifteen minutes. The CAM gives an on-screen message of "You do not have the rights to view this channel", but now I have my card back in OSCam, the channels are all clearing perfectly!

Code:

2017/04/30 23:19:54 50406B65 c (ecm) tvheadend (0500@030B00/1318/2329/15C:DBEDD8B68AB2E9FC97D3BA539BB163B9): found (284 ms) by TNTSat - TF1

It's all correct. Thank you Adam792!

makkabaeus · May 1, 2017

I can honestly confirm that I could update the card in my Vu+ Duo2 with openatv 6.0 in one of the normal internal cardreaders with the scam 3.59 (installed: enigma2-plugin-softcams-scam-3.59_3.59-r2_mipsel.ipk)
stopped any other emu.
Startet the scam via telnet with ./scam ? "scam" is the actual name of the bin. (bin was stored in /usr/bin with 755, no other (config)-files are necessary)

kalehrl · May 2, 2017

Can you post the output of your scam?

pcca-matrix · May 2, 2017

V6 need update too since today !

TNT Sat - Oscam + CCCam

tpetkov

makkabaeus

Motogato

Registered

valentino50

Registered

tpetkov

Felli71

Registered

Adam792

Registered

valentino50

Registered

valentino50

Registered

valentino50

Registered

pcca-matrix

valentino50

Registered

valentino50

Registered

valentino50

Registered

charmb

Adam792

Registered

Liegeois

makkabaeus

kalehrl

Registered

pcca-matrix