Sexview ?

Yes, you will need to run SBCL/vPlug on a PC networked to your Dreambox.

I switched to Mgcamd recently because I couldn't get CCcam to work properly with vPlug since the ECM timeout was introduced.

I run Mgcamd 1.29 with NewCs 1.50, both of which you can get via the blue panel.

I'm assuming that you know how to configure SBCL and vPlug generally - if not there are plenty of tutorials on the web.

Specifically for SV, make sure you have these lines in SBCL.ini:

TCPNcdPrvs=00060600000000062CE932010000000000000000000000

[ECM1]
Descr=SV
CAID=0606
PrvID=
Pattern=xx
Match=0


In mg_cfg, I set the following:

N: { 07 } 25 10
K: { 1 }
Q: { 10 }

and in newcamd.list make sure you have a line like:
CWS = XXX.XXX.XXX.XXX PPPP test test 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv,
where XXX.XXX.XXX.XXX PPPP are the IP address of your PC and the port number that SBCL is running on.

See how you get on with this. Otherwise I'll get you to post some logs and try to work out what is going on.

Forgot to mention, put this line in vplug.ini:

ECM_Filter_Timeout_Sec = 86500

and re-start vPlug daily!

Because SBCL does not send EMMs to vPlug, you will need to add keys manually to vPlug. I suggest you clear out all keys then add SV keys (Name=I, Provider=00, plus latest Key Index/Key). Keys change about every half an hour, so make sure they are bang up to date.

If that fails, post SBCL log.

Hi
Should the provider really be 00? should it not be 606?

0606 is CAID .
provider ID is 00 .

hello,

i´m also trying to get sexview with dream+sbcl+vplug...

how can i activate emms manually? i cleared out all keys with editor and reentered the current active key--> update.

but nothing happened in vplug...

pool12

yes it works now,

can anybody tell me, whats the entry in sbcl.ini for FreeXT v1.2.FreeX-Delight?

tried TCPNcdPrvs=00062600000000062CE932010000000000000000000000

but it wont clear...

pool12

TCPNcdPrvs looks OK.

In SBCL.ini have you got e.g.:
[ECM1]
Descr=FreeX
CAID=0626
PrvID=
Pattern=xx
Match=0

Are the FreeX keys up to date?

Post SBCL log if it's still not working.

thanks for the post...

where can i find up to date keys at this moment? these

http://www.sat-universe.com/showthread.php?p=161678#post161678

wont work

pool12

You're right, this key doesn't work any more and I cannot find any woking keys at the moment. I think the keys are changing quickly now. Keep looking!!

Nothing sexview

HI

I have a db7025 with mgcamd_1.29a
only file in /usr/keys/mg_cfg
with settings (and more)
N: { 07 } 25 10
K: { 1 }
Q: { 10 }
not instalt newcs ????

PC windows 2000 server
SBCL v1.0i
vplug 2.1.6
current active key

sbcl.ini
TCPNcdPrvs=00060600000000062CE932010000000000000000000000
[ECM1]
Descr=SV
CAID=0606
PrvID=
Pattern=xx
Match=0


from log file.
[23-03-2008 15:22:33] - SBCL v1.0i: - Timeout on ECM-PID: $0000
[23-03-2008 15:22:33] - SBCL v1.0i: - ECM filter has been stoped...
[23-03-2008 15:22:33] - SBCL v1.0i: - No. of keys in v_keys.db: 261
[23-03-2008 15:22:33] - SBCL v1.0i: - No. of rows in v_sids.db: 4148
[23-03-2008 15:22:33] - SBCL v1.0i: - SBCL v1.0i.exe - vPlug2.1.6
[23-03-2008 15:22:33] - SBCL v1.0i: - vPlug's location: E:\dvbapp\plugins\Plugins\
[23-03-2008 15:22:33] - SBCL v1.0i: - Working dir: E:\dvbapp\plugins\Plugins\
[23-03-2008 15:22:33] - SBCL v1.0i: - MD-API Version 01.03 - 1.06 [MD-API]
[23-03-2008 15:22:37] - SBCL v1.0i:SBCL - tp_id=$0000, SID=$36BA, PMT=$0000
[23-03-2008 15:22:37] - SBCL v1.0i:SBCL - ECM from SidCache: $00FF
[23-03-2008 15:22:37] - SBCL v1.0i:SBCL - StartECM_Filt-> $00FF
[23-03-2008 15:22:37] - SBCL v1.0i:SBCL - Added PMT filter, pid=$0000
[23-03-2008 15:22:38] - SBCL v1.0i:SBCL - EMM-CA: Standarized systems
[23-03-2008 15:22:38] - SBCL v1.0i:SBCL - Starting I2(0606) emm filter ...
[23-03-2008 15:22:38] - SBCL v1.0i:SBCL - Starting EMM filter on pid: $1D4C
[23-03-2008 15:22:44] - SBCL v1.0i:SBCL - PMT Pid =$0000, SID =$36BA
[23-03-2008 15:22:44] - SBCL v1.0i:SBCL - Timeout… This PID is empty.

I have som screen dumps, but it seems that i cannot upload them but i can send them in a PM.

Thank you in advance.

wulffcris

All ok now with new key

:clapping:

wulffcris

Is it possible to get sv with vplug with autoroll keys???

v_emm.ini looks like that:

[0606]
PID=1D4C
Schedule=1
Active=1

which entry ist necessary in v_keys.db???

pool12

Not with STB. SBCL does not send EMMs.

eddit

percivjr said:

SBCL does not send EMMs.

Click to expand...

Hi percivjr, thanks for your help.
Do you know another similar software?

No, I wish I did.

down on ctech too...