Mgcamd instal

install mgcamd 1.37

For E2 you can use for Dreambox HD.
http://www.sat-universe.com/showthread.php?t=215849
http://www.sat-universe.com/showthread.php?t=219011

pacedinki said:

Mgcam 1:38 shows me the green iredeto and CW channel but does not open, why?
chmod 755 \usr\bin\mgcamd1.38
chmod 755 \usr\script\mgcamd1.38

Click to expand...

http://www.4shared.com/file/bA5MlMBt/softcampanel_01.html

mgcamd1.38 for enigma2 azboxHD

my mgcamdlink:http://www.cshare.de/file/83f7236da5efd6b33db37091766a72ca/mgcamd138.zip.html
einfügen über FTP in usr! via FTP to azefolders!
usr/keys channel mode 755
and
usr/script 755
and
usr/bin 755
write in cccamd.list or newcamd.list your line
open the camd manager ,start mgcamd1.38
and have fun!
mgcamd1.38 working 100% in my azbox!
bye
oft ist das problem bei falscher configuration von mg_cfg ,hier mal meine config so läuft das auf der zboxHD!

look
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.209 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

moppybike said:

my mgcamdlink:http://www.cshare.de/file/83f7236da5efd6b33db37091766a72ca/mgcamd138.zip.html
einfügen über FTP in usr! via FTP to azefolders!
usr/keys channel mode 755
and
usr/script 755
and
usr/bin 755
write in cccamd.list or newcamd.list your line
open the camd manager ,start mgcamd1.38
and have fun!
mgcamd1.38 working 100% in my azbox!
bye
oft ist das problem bei falscher configuration von mg_cfg ,hier mal meine config so läuft das auf der zboxHD!

look
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.209 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

Click to expand...

Hi,thx for the instructions,can you tell me what do you mean when you say :
write in cccamd.list or newcamd.list your line ???

also c-line to cccamd.list-look: C: dyn or IP port name pass bsp: C: blaname.dndns.org 12222 blaname blapassword

and n-line to newcamd.list-look CWS = 192.168.xxx.xxx 22001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
also N-line ist hier CWS =
no N: 192.x.....

is it just to move this file over throug ftp or how does it work? I cant find any camd in my plugins, I have premium hd with spazeteam

Hi,
I use azbox elite hd and after many installations and plugins I recommend using cccam2.2.1. mgcam is not working good with enigma2 and azbox. cccam2.2.1 is the best solution at the moment.
What I mean is that installing mgcam could be a waste of time since it is not working stable (at least with RTi E2 1.6)

Huku said:

cccam2.2.1 is the best solution at the moment.

Click to expand...

Cccam is the worst emulator.
Only mgcamd works in Enigma.
CCcam can not display the log.
And do not know how to work with the encoding DRE.

In a new kernel (1.5 - 1.7) now only works mgcamd.

Unfortunately now all emulators with the kernel on Enigma for Azbox for us lost forever.

I tested Oscam, Wicard, Vizcam, CCcam and mgcamd.

Only mgcamd works.
Others have problems.

Huku said:

Hi,
I use azbox elite hd and after many installations and plugins I recommend using cccam2.2.1. mgcam is not working good with enigma2 and azbox. cccam2.2.1 is the best solution at the moment.
What I mean is that installing mgcam could be a waste of time since it is not working stable (at least with RTi E2 1.6)

Click to expand...

you're completely wrong... who d'ont know is how those who do not see

CCCam 2.1 work perfect, but only for CS!
It have not possibility to be only EMU, cos it do not use keys inside it, like MGCamd.
BR
MrTrapper

Thanks