wireless LAN

S

speeed

Registered
Messages
17
With hi
I have a wireless LAN for Tl-wn321g Dreambox chip got rt73
Has no option but to activate wlan network portions can not please guide
Thank you
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,533
Hi mate

It would help us if we knew the image you were using !
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,533
Which version DE mate the last one was really a EDG image.

Im at work now but ill take a look at the setup you need to go through when i get home but need to know the version your on.

Ferret
 
S

speeed

Registered
Messages
17
Hi
Edg image I used for my multi-boot
When allowed in part kernelmodel rt73 chipset does not enable
Wireless model I is the TL-WN321G VER 4.1
Thank you
 
Z

zeclio

Registered
Messages
12
There are many with your problem.
The problem is the version .....if it was 3.6 it works normal, but the 4.1 uses diferent drives.
I have a "SIM2.0.1_76D_ICVS Image 04.02.2011_GP3 .nfi" that my friend worked on and the wireless pen is working very well.
Is you want to test, please tell and i'l put the image in an upload center.
 
S

speeed

Registered
Messages
17
Hello dear friend
Whether there are late for v4.1
If you have not bother to address image
Additionally, my device is dm800se
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,533
Mate just so we know is your problem with the image you have in your flash or in mulitboot?

Ferret
 
Z

zeclio

Registered
Messages
12
Well, i'm afraid that the image will not work on your dm, because the image that i have is for the dm800 and not for de dm800Se.
 
B

bigroma

Registered
Messages
48
V4 based on rt2070 and not compatible with rt73 driver

I don't know about V4.1, please post PID VID from your dongle.

I compile driver for rt2870 and rt3070. With rt3070 driver V4 work.

Also I make patch for wireless plugin for setting up this dongle from GUI.
 
B

bigroma

Registered
Messages
48
No, I know this dongle, WN321G it name for sale not for technical. Please post VID and PID of your dongle.
 
B

bigroma

Registered
Messages
48
If you PID VID
0x148F,0x2070
I have solution for your dongle, please give me your mail and I send to you patch & driver.
 
S

speeed

Registered
Messages
17
driver ver:3.1.1.0
dll ver:1.0.4.100
eeprom ver:1.2 firmware ver:0.23
phy_address: 74-ea-3a-8b-93-df
 
S

speeed

Registered
Messages
17
Hello dear friend bigroma
devic instance id:usb\vid_148f&pid_2070\1.0
device hardware id:usb\vid_148f&pid_2070&rev_0101
 
B

bigroma

Registered
Messages
48
I send to you driver and patch, try it. Patch as I know not compatible with last iCVS from 0402. I hope make new version for a few days but now I don't have free time.
 
S

speeed

Registered
Messages
17
Thanks to my dear friend

Hello served with Grand Master bigroma
My problem with your guide honorable professor was solved
I thank you for the perfection
Thank you:thum:
 
T

The Hitman

Registered
Messages
16
I have the same problem with TP -LINK 321G ver. 4.1
I downloaded bigroma driver files. I just need some help. On wich DM800 clone image the patch works well and in what order they should be instaled. I tried in DreamElite PRZ Edition and it didnt worked, i got green screen in Network. Thanks
 
You must log in or register to reply here.
Top