hi there my box is stuck on starting...last think i have dan is send all this files multiboot-v27-cfe.tar.gz to right place via flash fxp on iriginal image then reboot the box in extension select the meboot boot from vti then box stuck on starting any help please thanks....
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
stuck on starting
- Thread starter levi45
- Start date
You must do this:
1) boot your VU+ in the bootconsole (with serial cable, press Ctrl+c to stop the bootsequence)
2) copy this command to the console and press enter:
code:
1:
boot -z -elf flash0.kernel: 'rootfstype=jffs2 root=/dev/mtdblock0 rw mem=0x8000000 bcmrac=3`
3) your box should boot from flash
4) open a telnet session and enter this command:
code:
1:
flash_eraseall /dev/mtd5
5) reboot your box with this command:
code:
1:
reboot -f
That's all. I hope you get your box back running.
1) boot your VU+ in the bootconsole (with serial cable, press Ctrl+c to stop the bootsequence)
2) copy this command to the console and press enter:
code:
1:
boot -z -elf flash0.kernel: 'rootfstype=jffs2 root=/dev/mtdblock0 rw mem=0x8000000 bcmrac=3`
3) your box should boot from flash
4) open a telnet session and enter this command:
code:
1:
flash_eraseall /dev/mtd5
5) reboot your box with this command:
code:
1:
reboot -f
That's all. I hope you get your box back running.
ardidurres
Registered
- Messages
- 5
Im trying to repair one vu duo
The commands go ok but the receiver remains stuck on:
Waiting the system to reset - but for a long time
What should be done in this case?
The commands go ok but the receiver remains stuck on:
Waiting the system to reset - but for a long time
What should be done in this case?