buy logger season interface

[spein46]

hi guys where can I buy a season interface with pic16f84?
thanks

[Rickk]

google pulsat

[spein46]

Originally Posted by Rickk

google pulsat

I found pulsat a season 2 interface but there aren t details about pic.
I would a logger with pic16f84 to log NDX postcam.
I found this on ebay https://www.ebay.it/itm/Smart-Card-E...IAAOxyXDhSeMSg

But I don t know it it has a right pic and seller don't answer me

The one pictured in your ebay listing has no PIC16F84 - the chips are MAX232 for 5V logic to RS232 level shifting, and SN7407 for open collector wire-OR of the Tx/Rx lines. I guess you may have difficulty finding a source of ready-built season loggers with PIC16F84 for baud rate conversion - you may have to build your own or modify a standard season2.

[TGILITO]

hxxp://www.makinterface.com/exple.php3?linkname=164
hxxp://www.cardman.com/programmers.html
73+51

[kugujen]

Hi,
Here what you're looking for

PHP Code:

http://www.tecnoglobe.it/shop/index.php?id_product=34&controller=product&id_lang=1 


But..

1) 16f84 on board has to be programmed (so you need a multipipo/ludipipo too)

2) Logger is appropriate for italian ndz only. It works (bad) with some other ndz and it don't work with the most part of European ones

So think carefull to it
That's all...

[spein46]

Originally Posted by klim

Hi,
Here what you're looking for

PHP Code:

http://www.tecnoglobe.it/shop/index.php?id_product=34&controller=product&id_lang=1 


But..

1) 16f84 on board has to be programmed (so you need a multipipo/ludipipo too)

2) Logger is appropriate for italian ndz only. It works (bad) with some other ndz and it don't work with the most part of European ones

So think carefull to it
That's all...

Thanks Kilim for answer.
I need logger for italian ndx, so this is goof for me.
if I wanted an already programmed logger?other e commerce?other solution?

[kugujen]

Originally Posted by spein46

Thanks Kilim for answer.
I need logger for italian ndx, so this is goof for me.
if I wanted an already programmed logger?other e commerce?other solution?

ok

I don't know...
But consider that could be several file .hex for it (depending of kind of skybox you have, future upgrades, revision and so on...)

So It's fundamental you'd be able to re-programm the chip in future

[Tonboyre]

Is it really necessary to use PIC to log N*S? Can someone explain why?

[Tonboyre]

Originally Posted by RiJordy

Is it really necessary to use PIC to log N*S? Can someone explain why?

I'll answer myself with what I found on another forum:

N*S uses non-standards baud rates as well as Inverting the data line and they reverse the bits being transmitted.

This is the reason for a PIC/Atmel chip

The chip can be programmed into non-standard baud rates - reversed bit order - inverted data line.

Then the chip re-arranges this info and sends it out to the PC at standard logging settings.

Hope this helps someone!