Metabox Tools & Editors

AYMENTN

Registered
Messages
291
The most important log for Metabox

those are the most important file for metabox
eMetabox temp edit1
his job is to inject or aspire firm from box to computer
it's a good log

eMetabox Key Editor

this log is to chnge key for metabox

FileSend 2004

log for inject firmware to receiver


Download Tools for eMetabox

log for change back grounds inject channel files and aspire it also
Jkeys for 28fxxx Intel


"]log for jitag[/]

010 Editor v 2.0.2

log for insert in chage keys..
 

AYMENTN

Registered
Messages
291
hex work shop with serial

this is the best editor for me to change keys words....

this is the serial D80C-927952-161670407
 
Last edited:

amiri

Registered
Messages
202
SIGNAL FIX PROBLEM FOR METABOX CLONES.
If you had loaded wrong full soft and now you dont have signal(not green),load this soft first and after that dreamsoft or metadream.

Thnx Fatmiri-Cupi
 

amiri

Registered
Messages
202
Here is the loader for Dsbackground:)
By this method you can set your metabox background with any photo you want.
1. download " kaon mpeg convertor" .by this programme you must change jpeg to mpeg and save it
2. install " Kaon CDH " then in patchs menu click on " load firmware " and open bin and click translate it will give error but never mind, then go to "imgae radio " click on patch image wait level complete.
3.use metaware stb wizard to upload image to receiver ( BG Radio or BG Video)
if you power on the receiver,you will see your picture on receiver.
 
Last edited:

baloota

Registered
Messages
2,055
take this with crack
put the crack director in SetEditAtSat folder

such as

c:\Program Files\SetEditAtSat\
 

wij

Registered
Messages
2,976
eMetabox key éditOr, NEW KEY EDITOR

eMetabox key éditOr, NEW KEY EDITOR
 

baloota

Registered
Messages
2,055
METABOX SBCL+WSP for showtime.ART

1.put the software metadream1924_beta update to your receiver

2.go to Menu-}edit key-}sharing et dongle-}Gbox and turn off your receiver

3. go to any one channal showtime and stop on

4.open the folder SBCL v1.0i + plugins and make copy all files in v_keys past it in same folder

5. and click SBCL and wsp and enjoy
 

AYMENTN

Registered
Messages
291
Metabox SBCL-WSP SHOWTIME-ART OK 100/100

metabox sccl-wsp ok 100/100 tested ok

showtime art ok 100/100 without cut

follow instructur in read me file
:thum:

NOTICE work fine with the last metadream19.2.7
 

marce

VIP
Messages
7,115
metabox_aime_jeux



salam voila a tool for our metabox can serve ca ...


metaboxeg6.jpg
 
Top