Latest Strong firmwares

vegeku90

Registered
Messages
1,586
Revolution4 22.03.08 by Tis Team

Keeping the promise, TIS-team is announcing a new version of its firmware Revolution4 with the tools SCT and StrongFlasher;

We actually need some more time to refine many things, but we told you about an Easter release, and so here it is!

As usual, the users of SRT-8000 model (2 and 3 flash) have to patience a little more, just the time to test a few things.

Thanks go to all members of the Team, who with dedication and sacrifice keeps on realizing this project.
Thanks, also, all those who, for pure passion and curiosity, made changes to various firmwares, so drawing the way for us, and also those who made tools to work on them, free for public use.

The list is very long, and many of them are unknown to us ... but we have to thanks them all!

Please, report any bug you find using our forum h++p://forum.tis-team.com , and use it also if you have comments and suggestions. (++ = tt)

The full-release, named TIS_EasterEgg2008.rar, consists of:
-- Firmware 8100 Revolution v4.0 SCT;
-- Manuale Revolution 4.0;
-- Tool SCT 1.1.7.47;
-- Tool StrongFlasher 0.2alpha;
-- Patch Thomson;



Here's a simple what-changes list, for further info just read the manual!

Revolution4:
-- Possibility to manage dishes-with-rotors , till 32 satellites and 16 rotors, with fully configurable parameters, 50 addressable
Sat-positions - gotox command$ implemented via DiseqC1.2, only for enabled rotors;
-- Expanded the range of SymbolRate to the max! Now you can use SR values between 1000 and 44000 (lower SRs tested down to 2000);
-- Renewed graphics;
-- Multilingual: ITA - ENG - FRA - ESP
-- New operating modes , with and without SCT tool ... now, you can use the internal CAM (and use your regular subscription) while using SCT; the SSSP protocol has also been implemented to have a direct serial link with those tools which support it (no need of SCT);
-- Serial speed to 115200baud, no patch needed;
-- Automatic time update from SAT data-flow, at startup;
-- Sleep Timer (range: 5 min - 3 hours);
-- Minor bugs fixed;

Tool SCT 1.1.7.47:
-- Fixed some bugs causing "out-of-memory" error;
-- New remote features: ReBoot and ShootOff STB;
-- New Options to interact with the Firmware;

StrongFlasher 0.2alpha;
-- Loads firmware via parallel port;

Now ... just make a good use of it!

Happy Easter 2008.

PrincYpe Tis-Team 2008


For 8100 only
 
Top