R01: NO CA FOUND DM800HDSE Clone E-star (SIM-card says: e-star SIM V3.0)
Hello bought for my neighbor an DM800HDSE.
I tried to clear up some unnessary stuff but that cracked up the box.
I could better get a new one, but can't stand the idea that this cannot be fixed.
Read a lot already but i need some assistance.
What do i know so far:
Before the crash I made pictures of the software and SSL etc:
Image : 2015-07-23
Model : dm800se
dvb-modules: : -dm800se - 3.2-20151201-r7.0.1
Linux version : 3.2-dm800se
Second stage : dreambox-secondstage-84-r20.1-Dreambox
Hardware : DM800SE
Image : Openpli 4
Kernel versie : 3.2
Enigma : 2014-01-28
Frontproccessor : versie 1
Tuner : Philips CU1216Mk3 (DVB-C)
Harde schijf : ATA(TOSHIBA MQ01ACF)(500.107GB)
After the crash I get contact with the box again with a modern laptop without com-ports.
For this I currently use Virtual serial Port driver9.0 from Eltima to fake com-ports.
If I use Estar dreamup V1.3.3.7 (tried a lot of different other verions) I can get contact with the box by using the mini usb cable.
By also using an Ethernet connection, an Ethernet connection is established and the box shows the IP-adres.
I can then go to the relevant webpage with Firefox.
I dont have to write down everything i guess, it says:
If you see this, your box didn't boot to Linux.
Unless you etc etc.
Interesting is:
You can download your current flash contents (64 MB) here, but please don't expect to be able to flash it back. It's merely a debugging feature.
This device's Serial Number is 10292, and was built on 2015/01/16.
Booloader version: Dreambox Second Stage Loader BUILD #79, built 20101015
When i try a firmwareupgrade here, i can choose one but the button Flash doesn't seem to work.
But flashing with the software program Estar dreamup V1.3.3.7 seems to work fine.
At this point i tried a lot of e-star images i could find with various SSL from 79..84.
But all my attemps end with: box will be unusable now!!
17:32:53 box type: DM800SE
18:10:28 Calculating checksum...
18:10:29 Uploading file to box...
18:10:49 box is flashing from its memory...
18:10:52 Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!
I dont know what to do at this point, any help or suggestions are welcome.
Hello bought for my neighbor an DM800HDSE.
I tried to clear up some unnessary stuff but that cracked up the box.
I could better get a new one, but can't stand the idea that this cannot be fixed.
Read a lot already but i need some assistance.
What do i know so far:
Before the crash I made pictures of the software and SSL etc:
Image : 2015-07-23
Model : dm800se
dvb-modules: : -dm800se - 3.2-20151201-r7.0.1
Linux version : 3.2-dm800se
Second stage : dreambox-secondstage-84-r20.1-Dreambox
Hardware : DM800SE
Image : Openpli 4
Kernel versie : 3.2
Enigma : 2014-01-28
Frontproccessor : versie 1
Tuner : Philips CU1216Mk3 (DVB-C)
Harde schijf : ATA(TOSHIBA MQ01ACF)(500.107GB)
After the crash I get contact with the box again with a modern laptop without com-ports.
For this I currently use Virtual serial Port driver9.0 from Eltima to fake com-ports.
If I use Estar dreamup V1.3.3.7 (tried a lot of different other verions) I can get contact with the box by using the mini usb cable.
By also using an Ethernet connection, an Ethernet connection is established and the box shows the IP-adres.
I can then go to the relevant webpage with Firefox.
I dont have to write down everything i guess, it says:
If you see this, your box didn't boot to Linux.
Unless you etc etc.
Interesting is:
You can download your current flash contents (64 MB) here, but please don't expect to be able to flash it back. It's merely a debugging feature.
This device's Serial Number is 10292, and was built on 2015/01/16.
Booloader version: Dreambox Second Stage Loader BUILD #79, built 20101015
When i try a firmwareupgrade here, i can choose one but the button Flash doesn't seem to work.
But flashing with the software program Estar dreamup V1.3.3.7 seems to work fine.
At this point i tried a lot of e-star images i could find with various SSL from 79..84.
But all my attemps end with: box will be unusable now!!
17:32:53 box type: DM800SE
18:10:28 Calculating checksum...
18:10:29 Uploading file to box...
18:10:49 box is flashing from its memory...
18:10:52 Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!
I dont know what to do at this point, any help or suggestions are welcome.
