Thanks to eeye for the english translation of an italian thread of sasa69.
Suitable fot Clarke-Tech 1500 - 2000 - 2100 models.
Secret Menu:
1)Press 8282 (it will appear the editor for all encryption systems with all the ke*s)
2)Press button mute and then the button exit (it will appear the k*y editor for only the channel your are watching)
3)Press 8280 (it will appear the B*SS k*y editor)
4)Press mute, exit and then text (it will appear the n*gra boxk*y)
5)Press 8282 and the yellow button (it will appear the n*gra boxk*y)
6)Press 0103 (Reset Pin. The Secure Pin for the menus will be reset. It will be useful if we forget it)
Symbols:
1)Encrypted channel = € symbol
2)Audio Selection = (stereo, left, right) you will be able to choose one of them pressing the AUDIO button
3)Subtext = you will be able to choose them pressing the AUDIO button
4)Audio Dolby Surround = if it is active you can use the dedicated outlet behind the receiver
Diagonostic Menu:
With the receiver in Stand-By mode:
1)Press and don't leave it the "CHANNEL ^" button on the receiver
2)At the same time press the Power-On button on the receiver. It will appear the Diagnostic Menu. When you will reboot the menu it will appear the language selection menu but it seems that you won't loose the other configurations. If you will active the Diagnostic Menu the receiver will reset the lat and log, so, if you use a rotor and USALS you have to choose the lat and long.
How to activate the Multicas:
1)Go on the Main Menu
2)Go on System Setup and then on Secure Setup
3)Insert the PIN (default PIN is: 0000)
4)You will see MULTICAS, set it on ON mode or (with old firmwares)
Go on an encrypted channel and press 6969 and 6969 another time
How to insert the MULT*V*SION AES:
1)Go on a multi*v*sion channel and press the MUTE button and then EXIT button, it will appear the k*ybox editor of TP*. Insert the first half of the k*y in K*y 01 and the second half in K*y 11. Exit and save.
How to insert the ke*s for XPLUS and INXCT (with bi*s key editor)
1)Go on XPLUS or INXTC channel
2)Open the biss ke* editor (8280) and select one of the key line
3)Write the first part of the key in the line you have choosen
4)Write the second part of the key in the under line
5)Select the first key you have written and press exit. You will see the channels. Have fun!
Or:
The same procedure but if you want only XPLUS you can write only the last 8byte of the CW or if you want only INXTC you can write only the first 8bytes of the CW
Manual upgrade for PO*SAT:
1)Go on a PO*SAT channel and press 8282
2)Go until the 7001 (pol*at provider) and change the ke* 10-11-20-21 with the new ones. Exit and save.
Or (the correct manual procedure):
1)You have to write also the indexes of the provider:
10 + key
11 + key
20 + key
21 + key
so not only the operatives k*ys it will be useful in the future because not only the 20 and 21 can be changed but also the 10 and 11.
Or:
1)Change in the softcam the ke*s 10 and 11 and write them similar to 20 and 21.
*********
How to insert k*ys for SexView Broadcast (with B*SS ke* editor):
The public keys give light to 5 channels of SexView Broadcast; they are SexView 247, SexView DP, SexView Plus, SexView Extra and SexView Cum. We can insert these keys in our Clarke-Tech with B*SS ke* editor.
1)Look for a sotfcam with the ke*s for SexView or download for example v_dcw by Mach1
2)Scan 12360H Sr27500 on HotBird 13°E to find the channels
3)Go on SexView 247 and press 8280 to open the B*SS editor
4)Write on a line the first 8bytes (the first half) of the key for SexView 247
5)Press EXIT and then confim the changes pressing OK. The channel will be clear.
6)Go on SexView DP and do the same procedure like SexView 247 (obviously using the ke* for SexView DP and writing it on a new line)
7)Go on SexView Plus and now write in the editor the last 8bytes (the second half) of the k*y for SexView Plus. Confirm the changes.
8)Write also the first 8bytes of the k*ys of SexView Extra and SexView Cum on different lines to see them.I hope it will be useful for you.
******************************
Manual upgrade for D+:
a)press 8282 and go on one of D+'s channels, go until the 4001 provider (it's the same of 4101), replace the ke*s with the new indexes 10-11 or 20-21 (it depends on the key* they change) save and exit.
b)the correct procedure is to rewrite the indexes newly:
10+key
11+key
or:
20+key
21+key
so, not only the operatives.. this will be useful in the future, 'cause not only the 20 and 21 can be changed but also 10 and 11.
c)otherwise, in the softcam, change the 10 and 11 or 20 and 21 ke*s
******************************
Manual upgrade for cryptowor*s:
Once uploaded one softc*m with CW providers with AngelUpTool1.8.4 if needed you only have to edit the lines 00, 10, 01 and 11 in the appropriate menu (hitting 8282 or mute+exit). The 16 bytes CW k*ys must be divided into two strings each of 8 bytes. The 00 must be set between 00 and 10 while 01 between 01 and 11(THANKS DOCTOR46)
******************************
Everybody can partecipate with new secrets.
Excuse me for my "bad" translation but I hope you can understand.
Regards.