Trikolor TV 36°E (DRE-Crypt Gold Card)

tricolor gold card

the card dont accept the file, is anyone faced the problem?

thanks, for info, but dont know why when i press write it says error or aborted

zip archive must been unziped and hex file flashed in flash, then you get card info in box:

I can't programm card not with ICprog nor IGprog, but with old "card" that contain two chips ( pic and eprom) I removed pic84, put it to simplest JDM programmer, programmed it ( got result only with IGprog) with hex file,
put again to "card" , after 10 minutes all going well. (coz full AU )

Reference here:
_h**p_://viaccessfree.biz/forum/showthread.php?t=34889&page=4

JGprog:
_h**p_://www.ksw-funcard.civ.pl/FunCard/Download/JGprog_PAP.htm

Regards.

igors20 said:

I can't programm card not with ICprog nor IGprog, but with old "card" that contain two chips ( pic and eprom) I removed pic84, put it to simplest JDM programmer, programmed it ( got result only with IGprog) with hex file,
put again to "card" , after 10 minutes all going well. (coz full AU )

Reference here:
_h**p_://viaccessfree.biz/forum/showthread.php?t=34889&page=4

JGprog:
_h**p_://www.ksw-funcard.civ.pl/FunCard/Download/JGprog_PAP.htm

Regards.

Click to expand...

how use JGprog ? it is not english, help please

I used this one:
_h**p_:///www.ols.vectranet.pl/~ksw/pliki_do_pobrania/JGProg/JGPROG_18_04_2003_VIP_Funrrari.ZIP

There is language option (english also included too )

Regards.

igors20 said:

I used this one:
_h**p_:///www.ols.vectranet.pl/~ksw/pliki_do_pobrania/JGProg/JGPROG_18_04_2003_VIP_Funrrari.ZIP

There is language option (english also included too )

Regards.

Click to expand...

mate, i get this log:

PIC ERASE : START
**** 5:1
**** 5:2
**** 5:3
**** 5:4
**** 5:5
PIC ERASE FLASH : STOP
PIC WRITE FLASH : START
PIC WRITE FLASH : ERROR ADR[FFFFFFFF]
PIC WRITE FLASH : STOP
PIC VERYFI FLASH : START
PIC VERYFI FLASH : ERROR ADR[0000]
PIC VERYFI FLASH : STOP

means the card is dead?

Try to erase card, after that setup no protect bits, after that load hex file and programm again. Actually I got troubles in WinXp.
Try (if you have it) win98,but I got result after a couple of restarts of WinXP too. And try to reset com port to standard settings within windows.

Regards.

thanks igor i apperciate your help
i will try with winxp, hope will fix it
actually i have 2 B3 but as you know { no hd }, so want try the wafer may be i get the hd

With this shit you can't get hd too
This wafer dre-2, but hd dre-3
Coz new overcrypt algo...
P.S Neeeds to deep exploration of NP chip
_h**p_://www.break-ic.com/

Regards.

Yep, I used exactly rs 232 JDM programmer
_h**p_://www.belza.cz/digital/jdm-sch.gif
_h**p_://www.belza.cz/digital/jdm.htm

Regards.

Card is update for the next years,ECM are ok, but no piktures on all.

Working 100%
You have to put to oscam and wait about 10 minutes for
AU. Basically DRE card for ECM answers always ok even with old keys,
but it's dre specific issue so dont be confused and wait for AU.
Second question is that it can be easyly killed, coz probably there
is no hash check for EMM, but for studying about PIC assembler this
is perfect example. For now I'm also reading about PIC assembly.
That's really interesting. Someone (more skilled then me) can implementing this to add checksum check, coz oscam sources full public.
P.S. Some translation:
PIC eprom
000: 3B 15 11 12 CA 07 11 CA ;...К..К ---- ATR
0008: 06 C2 12 21 05 B3 03 62 .В.!.і.b---- 12 21 05 B3 UA
0010: FF 00 00 00 00 00 00 00 я.......
0018: 15 82 02 04 11 54 52 49 .‚...TRI
0020: 43 4F 4C 4F 52 20 54 56 COLOR TV
0028: 00 FF FF FF FF FF 0A 52 .яяяяя.R
0030: 50 90 6A 00 70 90 6A 80 Pђj.pђjЂ -------DATA
0038: 00 00 00 00 00 00 00 00 ........

Regards.

Can you tell my one Programm that works please?

can normal " Universal Ku band LNB "
recive these TP's ?

empb said:

Programed 100% perfectly. Spiderbox CAS reads it as a DRE-Crypt card ok*

*Not work Diablo or Matrix. Dragon may be ok with updated CaIDs

Prog one file only: Flash

Click to expand...

Please give me this program.