I will still stick to my guns seeing is bealiving !
I want nagra 3 hacked more then anyhting in the world but this hack i want to bealive but it is too hard
And me...
DUO CARD -New Card ( Chat)
- Thread starter marokino08
- Start date
And me...
eldereli84
Registered
- Messages
- 72
how much money this card
--------------------------------------------------------------------------------
HOW TO UPGRADE DUO CARD
Update using a pendrive:
1) rename the DuoAPPv18.duo file to duoAPP.duo
2) copy the duoAPP.Duo file into a pendrive on root directory.
3) insert the pendrive in the receiver
4) on the receiver, select update DUO Card and wait
your card is already updated!
Update using a PC and a phoenix interface:
1- copy the DUOAPPv18 and the DuoAppLoader files in your PC.
2- Select the apropiate com port for you PHOENIX adapter.
3- Select the apropiate firmware
4- push "connect"
HOW TO UPGRADE FIRMWARE
To do the upgrade, turn off the STB and connect the STB to the PC using a null
modem cable (2-3 3-2 5-5), then start the program in the PC, select the new
firmware to load and start the upgrade procedure, then turn the STB on and the
upgrade process will begin. Follow the screen instructions.
EMU MODE
When Emumodule is active, you can access to special menus
- MENU - TOOLS - KEY EDITOR - to edit the keys that change periodically
- INFO - INFO (two times INFO key) - to display information about emulation
------------------------------------------------------------------------------
|********This information does not affect SRX series******** |
------------------------------------------------------------------------------
By default, the module is deactivated, to activate it do the following
process
1.- Go to main menu (press menu in RCU)
2.- Press 2 0 2 0 in the RCU
3.- A popup message will appear CAS SYSTEM ENABLED
4.- Emu module is now working
To disable the module repeat the above procedure, the popup will change
to 'CAS SYSTEM DISABLED'
AUTOUPDATE CONTROL
By default, autoupdate in D+ and TV Cabo is activated.
to deacativate it, go to Main Menu (press menu key in your RCU), and press
2121[/quote]
Here are Instruments
http://www.sat-universe.com/showthread.php?t=224700
HOW TO UPGRADE DUO CARD
Update using a pendrive:
1) rename the DuoAPPv18.duo file to duoAPP.duo
2) copy the duoAPP.Duo file into a pendrive on root directory.
3) insert the pendrive in the receiver
4) on the receiver, select update DUO Card and wait
your card is already updated!
Update using a PC and a phoenix interface:
1- copy the DUOAPPv18 and the DuoAppLoader files in your PC.
2- Select the apropiate com port for you PHOENIX adapter.
3- Select the apropiate firmware
4- push "connect"
HOW TO UPGRADE FIRMWARE
To do the upgrade, turn off the STB and connect the STB to the PC using a null
modem cable (2-3 3-2 5-5), then start the program in the PC, select the new
firmware to load and start the upgrade procedure, then turn the STB on and the
upgrade process will begin. Follow the screen instructions.
EMU MODE
When Emumodule is active, you can access to special menus
- MENU - TOOLS - KEY EDITOR - to edit the keys that change periodically
- INFO - INFO (two times INFO key) - to display information about emulation
------------------------------------------------------------------------------
|********This information does not affect SRX series******** |
------------------------------------------------------------------------------
By default, the module is deactivated, to activate it do the following
process
1.- Go to main menu (press menu in RCU)
2.- Press 2 0 2 0 in the RCU
3.- A popup message will appear CAS SYSTEM ENABLED
4.- Emu module is now working
To disable the module repeat the above procedure, the popup will change
to 'CAS SYSTEM DISABLED'
AUTOUPDATE CONTROL
By default, autoupdate in D+ and TV Cabo is activated.
to deacativate it, go to Main Menu (press menu key in your RCU), and press
2121[/quote]
Here are Instruments
http://www.sat-universe.com/showthread.php?t=224700
hi
i have windows xp i set the DuoAppLoader my pc in C/
its now working ( the loder not open it ask my this file COMDLG32.OCX . and i get the file from the net and i send to the my pc in temp folder . still no working . this is the massge i get it
----You need to download the file ****> COMDLG32.OCX .
File :http://herosh.com/download/10518628/COMDLG32.OCX.rar.html
===========================================================
----Unzip and Put it in ****> C:\WINDOWS\system32 .
=============================================================
----Reboot your Computer,,,,and then the Loader Works...OK
Last edited:
If you took the time to read the thread you would have seen that moresat is behind the card go to moresat.net
Echolink, Echostar, Starsat etc + Clones
just few of this work on nagra3 hack
and more pc,data,other softwares in underworld,big game on nagra3 providers..enjoy...
What is this mate ?
Unloopers for N3 cards ?
Thanks
yes mate, thanks, but i already saw those infos, and yes, i took the time and went throught whole thread, i just wanted to know, as i mentioned in the post above, is somebody has any info for the card, where can be obtained and maybe the price range, and is it available yet, or is not yet released public.
thanks again.
BR
MORESAT and AS YET NOT PUBLIC