Latest Fausto Editor for Diablo CAM [Other CAMs with Season Interface]

SANTO_DOMINGO

Registered
Messages
479
Latest Fausto New Version 1.28

Version 1.28 TPS FIX (24/06/2008)

Code:
-Emulator:

TPS FIXED BACK AGAIN
Worked with Fausto wireless & season interface

Tested under:
Cams: MR, TRE Predator/Predasaur), JOKER,...
Receiver Cards Reader: Cristor, Clarke tech, xsat410,...

IMPORTANT:
you must delete files TPS.FNS & V_TPS.DB if exist on folder \FAUSTO\EMU\TPS
before DRAG File TPS.BIN of the day on Fausto Emulator window
 

marce

VIP
Messages
7,115
Fausto v1.29 (25/07/2008)

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



FAUSTO KEYS-EDITOR/EMULATOR/LOGGER/CLIENT


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys-used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include TPS Files (actually TPS.BIN)


Version 1.29 (25/07/200Cool
-Editor
*Export Keys-file: New file exported Fausto_Control_Word.txt

-Emulator:
*Cards Support: Added Cryptoworks official card support
*Card Client (NEW): added protocol Newcamd for Card sharing (worked with diablo wireless & via season interface for others cams)
*Season Interface:
-Added Season Cryptoworks Emulation (Require *** 06 under xml/Keys.bin files)
-Cryptoworks coding system worked under Irdeto xin1 emulation for somes cams (ex Dragon, MR)
(Require key06 under xml/Keys.bin files)
-Added Official Cards Support: Set default Caids/provid used by card on file Season.ini Folder \Fausto\Emu\Season
-Added support of Newcamd protocol for card sharing: Set default Caids/provid used by card on file Season.ini Folder \Fausto\Emu\Season
-Fausto & Season Bauds Settings.txt updated
-Language files: New datas added ready for translation
 
Last edited by a moderator:

sugarnspice

Registered
Messages
354
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM




FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include TPS Files (actually TPS.BIN)


Version 1.30 (01/09/2008)
-Emulator:
*MONITOR:
Possible to enable/disable Emulator, Card Support or Card client by
using popup menu under MONITOR (Mouse right clic)
Under Same menu possible to set priorty
Emulator settings saved/loaded on/from file \Fausto\EMU\FESettings.ini
*Season
added files: SecaProviders.ini & ViaccessProviders.ini
On it, provid used by season emulation concerned
Has been added for SECA Cam (like aston) or Viaccess cam & Card sharing
Please before use it, Open files & read infos in
Added "Datas bauds" in general same as ATR bauds except for somes emulation
(prepared for future addons)
*Card Client:
Added somes fixes for CS & season interface
(card tested other the net: Betacrypt/irdeto/Viaccess/Seca/cryptoworks/conax/VG)
Added new data "Server Description" under tab Settings
Added Tab servers: grid list
All servers stored under file clientbase.ini (folder Fausto\Emu\CardClient)
will appear on grid
To increase or decrease number of servers in use just modify value of
record Number in file clientbase.ini
Go under Tab CardClient, on Server grid select server wanted & change datas under tab settings
*Added CARD CLIENT traffic log (mouse right clic)
-Log card client traffic (enabled if ticked):
Store card informations & ONLY Caid/provid/ecms/cws decoded by Newcamd Server
-Save Log file (default file name is Fausto_Card_Client_Log.txt)
-Clear datas logged in memory

-Extras:
*Fausto & Season Bauds Settings.txt updated with XCam & Dreambox Settings (Angel chip)
*Language files: New datas added ready for translation


Version 1.29 (25/07/2008)
-Editor
*Export Keys file: New file exported Fausto_Control_Word.txt

-Emulator:
*Cards Support: Added Cryptoworks official card support
*Card Client (NEW): added protocol Newcamd for Card sharing (worked with diablo wireless & via season interface for others cams)
*Season Interface:
-Added Season Cryptoworks Emulation (Require key 06 under xml/Keys.bin files)
-Cryptoworks coding system worked under Irdeto xin1 emulation for somes cams (exragon, MR)
(Require key 06 under xml/Keys.bin files)
-Added Official Cards Support: Set default Caids/provid used by card on file Season.ini Folder \Fausto\Emu\Season
-Added support of Newcamd protocol for card sharing: Set default Caids/provid used by card on file Season.ini Folder \Fausto\Emu\Season
-Fausto & Season Bauds Settings.txt updated
-Language files: New datas added ready for translation


Version 1.28 TPS FIX (24/06/2008)
-Emulator:
TPS FIXED BACK AGAIN
Worked with diablo Wireless & others cams with season interface
Tested under:
Cams: MR, TREX(Predator/Predasaur), JOKER,...
Receiver Cards Reader: Cristor, Clarke tech, xsat410,...
IMPORTANT: you must delete files TPS.FNS & V_TPS.DB if exist on folder \FAUSTO\EMU\TPS
before DRAG File TPS.BIN of the day on Fausto Emulator window


Version 1.28 (13/06/2008)

-Editor:
Due to new evolution of Fausto (multicam support => editor is not specific to diablo cam now)
Those file as been renamed
Fausto Keys.XML -> Fausto MultiCam Keys.XML
Diablo_CAIDS.TXT -> Fausto_CAIDS.TXT
Diablo_Idents_List.txt -> Fausto_Idents_List.txt
Diablo_Keys.txt -> Fausto_Keys.txt
Diablo_Softcam.key -> Fausto_Softcam.key
Diablo_TPSCRYPT2.txt -> Fausto_TPSCRYPT2.txt
Diablo_AES_Keys.txt -> Fausto_AES_Keys.txt
If old keys file exist delete it & export keys file again

-Logger:
*Events manager modified -> Less cpu usage

-Emulator:
*Events manager modified -> Less cpu usage
*Tab Control word added: now it easy to view all Control word exported on BIN File (can help for cleaning BIN File)
*Tab CARDS: Added 2 new coding system (cf file Fausto & cards support.txt)
*Tab Season: Season emulation added now Fausto Emulator work also with ALL CAMS & Receiver Cards Reader
(Predator, Predasaur, Joker/Neotion, Matrix Reloaded (MR1051), Irdeto Module, Magic Module..., Cristor,Clarke tech,...embedded card reader)
Must Work too with others cams but we haven't for tests
Keys.bin file shared with all cams/receiver cards reader
For more details report to files
*Fausto & Season Interface How To.txt
*Fausto & Season Bauds Settings.txt
*Fausto & Season Bauds Rate Table.txt
More infos come soon on chat section



SecaProvider.ini file description
(folder \Fausto\EMU\Season)


[Season Seca]
#In this file you can define the providers to use on Seca Cams (Aston)
#or other cams that support Seca emulation (Dragon,Diablo,etc.)
#Fausto reads the value in Number= to know the max providers it will use.Max number is 15.
#For Trex define Number=4 max with more you'll have probs cause bug on firmware
#for diablo define number=4 max
#For Aston define number=10 max
#if you know problem on others cams/card reader boot reduce Number value
#Providers must follow correct numbering like below
# ProvID_1=
# ProvID_2=
# ProvID_3=
Number=14
ProvID_1=0000 Seca
ProvID_2=0030 RAI
ProvID_3=002A MEDIATECH
ProvID_4=006A CANAL+ NL
ProvID_5=006C TV VLAANDEREN
ProvID_6=0065 CYFRA
ProvID_7=3315 CANAL+ FR
ProvID_8=3317 CSAT FR
ProvID_9=0080 CANAL+ FR
ProvID_10=0081 CSAT FR
ProvID_11=0084 NUMERICABLE
ProvID_12=0085 FTC
ProvID_13=0086 PROTV
ProvID_14=4101 DIGITAL+
ProvID_15=0000 EMPTY

Boot Sequence
Season Seca Selected
Serial COM Initialized
Waiting For Card Season Reset...
Answer To Reset
ATR>3BF711000140967070070E6CB6D69000
ATR Sent Sucessfully
ATR Rate : 11520
Datas Rate: 11520
C10E000008>Request Serial
C116000007>Request Entities Number
C112000019>Request Entity 0
(ID: 0000->Seca)
C112010019>Request Entity 1
(ID: 0030->RAI)
C112020019>Request Entity 2
(ID: 002A->MEDIATECH)
C112030019>Request Entity 3
(ID: 006A->CANAL+NL)
C112040019>Request Entity 4
(ID: 006C->TVVLAANDEREN)
C112050019>Request Entity 5
(ID: 0065->CYFRA)
C112060019>Request Entity 6
(ID: 3315->CANAL+FR)
C112070019>Request Entity 7
(ID: 3317->CSATFR)
C112080019>Request Entity 8
(ID: 0080->CANAL+FR)
C112090019>Request Entity 9
(ID: 0081->CSATFR)
C1120A0019>Request Entity 10
(ID: 0084->NUMERICABLE)
C1120B0019>Request Entity 11
(ID: 0085->FTC)
C1120C0019>Request Entity 12
(ID: 0086->PROTV)
C1120D0019>Request Entity 13
(ID: 4101->DIGITAL+)


ViaccessProvider.ini file description
(folder \Fausto\EMU\Season)



[Season Viaccess]
#In this file you can define the providers to use on Viaccess Season Emulation
#Fausto reads the value in Number= to know the max providers it will use.Max number is 16.
#Providers must follow correct numbering like below
# ProvID_1=
# ProvID_2=
# ProvID_3=
# if you know problem on cams/card reader boot reduce Number value
Number=15
ProvID_1=FFF400 ISSUER
ProvID_2=007C00 TPS/ABSAT
ProvID_3=007400 MCM Belgique
ProvID_4=007800 Sic.Inter
ProvID_5=00E810 Globe.Spain
ProvID_6=00B000 TV Slo
ProvID_7=023800 SRG Swiss
ProvID_8=022C00 RTVi
ProvID_9=024F00 AKTA/MAXTV
ProvID_10=024400 FreexTV
ProvID_11=020910 SexView
ProvID_12=025100 MCT/RedLight
ProvID_13=024410 FreeX/DORCEL
ProvID_14=021110 ART SPORTS
ProvID_15=030700 JSC Sports
ProvID_16=000000 EMPTY

Boot Sequence
Season Viaccess Selected
Serial COM Initialized
Waiting For Card Season Reset...
Answer To Reset
ATR>3F7718250029140062689000
ATR Sent Sucessfully
ATR Rate : 9600
Datas Rate: 9600
8702000003>General Info 02
8704000007>Instruction 04
8706000009>Instruction 06
8702000003>General Info 02
CAA4000000>Reset Chanel Counter (ISSUER)
CAACA40000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000005>Ins B8/Inquiry
CAA4000000>Reset Chanel Counter (ISSUER)
CAA4020000>Select Next Chanel (ID:FFF400->ISSUER)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:007C00->TPS/ABSAT)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:007400->MCM Belgique)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:007800->Sic.Inter)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:00E810->Globe.Spain)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:00B000->TV Slo)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:023800->SRG Swiss)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:022C00->RTVi)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:024F00->AKTA/MAXTV)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:024400->FreexTV)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:020910->SexView)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:025100->MCT/RedLight)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:024410->FreeX/DORCEL)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:021110->ART SPORTS)
CAC000001A>Information Request
CAACA50000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA60000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB8000004>Ins B8/Inquiry
CAACA70000>Ins AC/Inquiry
CAB8000002>Ins B8/Inquiry
CAB800000A>Ins B8/Inquiry
CAA4020000>Select Next Chanel (ID:030700->JSC Sports)


Special Thanks to:
JKF Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie.


Enjoy.​
 

sugarnspice

Registered
Messages
354
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM

FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT



Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include TPS Files (actually TPS.BIN)


Version 1.31 (05/09/2008)
-Editor:
Modified Irdeto2 provider definition on Modele.XML for Fausto Emulator & Irdeto2
ECM IV & ECM Seed keys added for Fausto Emulator to keep portabilities of Keys file with diablo cam emulator

-Emulator:
Irdeto2 Hack added
Actually worked ART/ADD
Update active keys like diablo cam emulator
ECM IV & ECM Seed keys value entered under our Fausto Multicam Keys file (example File under folder \Fausto\Keys)
*about Season & Irdeto:
- If reader/cams not support Irdeto xin1, select caid Irdeto1 (0606,0604,0603,0602)
to make package working (example Dreambox 7000S internal card reader, Irdeto cam not patched xin1, Diablo Light, ...)
- Caid concerned must be under cam firmware too (example with last TRex firmware caid 0604 must be added, use DragonCrypt for that)


Version 1.30 (01/09/2008)
-Emulator:
*MONITOR:
Possible to enable/disable Emulator, Card Support or Card client by
using popup menu under MONITOR (Mouse right clic)
Under Same menu possible to set priorty
Emulator settings saved/loaded on/from file \Fausto\EMU\FESettings.ini
*Season
added files: SecaProviders.ini & ViaccessProviders.ini
On it, provid used by season emulation concerned
Has been added for SECA Cam (like aston) or Viaccess cam & Card sharing
Please before use it, Open files & read infos in
Added "Datas bauds" in general same as ATR bauds except for somes emulation
(prepared for future addons)
*Card Client:
Added somes fixes for CS & season interface
(card tested other the net: Betacrypt/irdeto/Viaccess/Seca/cryptoworks/conax/VG)
Added new data "Server Description" under tab Settings
Added Tab servers: grid list
All servers stored under file clientbase.ini (folder Fausto\Emu\CardClient)
will appear on grid
To increase or decrease number of servers in use just modify value of
record Number in file clientbase.ini
Go under Tab CardClient, on Server grid select server wanted & change datas under tab settings
*Added CARD CLIENT traffic log (mouse right clic)
-Log card client traffic (enabled if ticked):
Store card informations & ONLY Caid/provid/ecms/cws decoded by Newcamd Server
-Save Log file (default file name is Fausto_Card_Client_Log.txt)
-Clear datas logged in memory

-Extras:
*Fausto & Season Bauds Settings.txt updated with XCam & Dreambox Settings
*Language files: New datas added ready for translation


Version 1.29 (25/07/2008)
-Editor
*Export Keys file: New file exported Fausto_Control_Word.txt

-Emulator:
*Cards Support: Added Cryptoworks official card support
*Card Client (NEW): added protocol Newcamd for Card sharing (worked with diablo wireless & via season interface for others cams)
*Season Interface:
-Added Season Cryptoworks Emulation (Require key 06 under xml/Keys.bin files)
-Cryptoworks coding system worked under Irdeto xin1 emulation for somes cams (ex:Dragon, MR)
(Require key 06 under xml/Keys.bin files)
-Added Official Cards Support: Set default Caids/provid used by card on file Season.ini Folder \Fausto\Emu\Season
-Added support of Newcamd protocol for card sharing: Set default Caids/provid used by card on file Season.ini Folder \Fausto\Emu\Season
-Fausto & Season Bauds Settings.txt updated
-Language files: New datas added ready for translation


Special Thanks to:
JKF Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie.


Enjoy.​
 

joseph_lowe

Registered
Messages
152
Fausto Version 1.32
(C)MASARE Team-Saoud007
(C)FullDump TM

FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT

Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe

Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include TPS Files (actually TPS.BIN)


Version 1.32 (06/09/2008)
-Emulator:
Season Interface: added Direct Control Word support (all season emulations)
For How to report to File : Fausto & DCW with Season.txt
Language files updated with New Datas, ready for translation
 

Verdeoro

VIP
Messages
1,529
Fausto V 1.33

Fausto
©MASARE Team-Saoud007
©FullDump TM



FAUSTO EDITOR/EMULATOR/LOGGER/CLIENT


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This Kekse used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Kekse.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include TPS Files (actually TPS.BIN)
*Include ECM IV & ECM Seed Kekse under Irdeto2 Coding System



Version 1.33 (03/10/2008 )
-Editor
Edit/Modify Text File -> Possible to load/modify INI file

-Emulator
TPS Fixed: Worked with last TPS.BIN
Emulator settings: Tab Monitor mouse right clic
*added auto load last Kekse file
*added auto start wireless (connect to wireless auto if auto load Kekse file ticked)
*added auto start Season (connect to season auto if auto load Kekse file ticked)
*added auto start Card Client (connect auto to last server used)
*last season settings used saved in file \Fausto\Emu\season.ini (loaded when emulator open)
*last card client server number saved in file \Fausto\Emu\season.ini (loaded when emulator open)
Season.Ini File added Nagra2 default ident for Fausto Emulator
Tab Wireless: Process connection to diablo base unit.
Tab Card Client: added Tab SID, if you know problem with server card decryption use this option
(SIDOVERRIDE not set on server settings)


Seca2:
Provider 006C TV Vlaanderen somes chanel worked
Astra 19.2*E
Ident: 006C
12012 V France 2
12012 V France 3
12168 V France 4
12207 V France 5
11817 V Mezzo
12012 V Trace TV
12012 V Motors TV
12324 V Sailing Channel International
With Diablo wireless delete S2_NL.BIN table on cam


-Extra:
*Language files: New datas added ready for translation
 
Last edited:

kiliantv

Super VIP
Messages
7,057
Fausto v1.34 (04/11/2008)

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include TPS Files (actually TPS.BIN)
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System



Version 1.34 (04/11/2008)
-Emulator:
* Added *** Fake Hack (Premiere/ORF/Viasat)
* Added DVB plugins support: Plugins files must be copied under folder \Fausto\EMU\Plugins
(details on PDF file Fausto Emulator & DVB Plugins.pdf)
Possible to use 3 emulators at same time
example:
- Diablo Cam Emulator for Conax & FreeXTV
- DVB Plugin Emulator for Seca2 provider 0084/0086
- Fausto Emulator for decoding all the rest

Monitor:
* added option open folders (Fausto & EMU) -> local menu, press mouse rigth clic
* added option enable/disable DVB Plugins -> local menu, press mouse rigth clic under "Main Functions" option

Card Support:
* Added option Enable/disable Show datas under local popup menu (mouse right clic)

Card Client:
* Added Radegast protocol support
* tab servers: possible to move server by drag & drop
* tab settings: possible to add/delete server (button + and -)
* Reconnection auto to Server if connection lost
* ClientBase.ini created if not exist (now not need to backup clientbase.ini before install Fausto)

Season:
* Added somes VG caids for irdeto xin1 (combobox list Caids), use it if no ecm incoming with your cam & ALL caids selected
* Added some Default seca2 provider can be selected like Default Nagra2 provider
* Added option Inverse *** ECM Header: required for define ODD or EVEN CW for *** hack, Fausto cards support & Card Sharing. After Press button CONNECT (Irdeto xin1), press mouse rigth clic
When Control Word come under Tab Monitor and tv picture not cleared clic on this option to clear tv picture

New Tab Ignore List:
* Caid Ignored for Incoming ECM
* Providers Ignored for Incoming ECM
* Apply Ignore list for Incoming ECM
Datas Saved on File FESettings.ini

-Extra:
*Language files: New datas added ready for translation


Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie, Anunaki.


Enjoy.
 

k@lkov

Super VIP
Messages
10,003
Fausto Language File Update

Language: Dutch
Author: magictrance
Code:
1.Unzip file
2.Copy SIL File on folder ..\Fausto\Languages
3.On main menu select option SETTINGS -> LANGUAGE -> Select new SIL file (become the language used by default)

Language: Italian
 

Verdeoro

VIP
Messages
1,529
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System


CS Client protocol supported:
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Version 1.36 (18/03/2009)
- Editor
********Caids File Edit
*Added Drag file function
*Added possibility to edit Comment line, Source list changes saved auto
********Export keys Files
*added Comment datas on caids.xml
*modified file Fausto_CAIDS.TXT
********Import Keys
*added somes coding system for filter selection selection (irdeto,betacrypt,conax)
*fixed somes problems


- Emulator
*Setup: New Tab for editing Fausto INI Files

*Season:
********Emulation Irdeto -> possible to define custom caids (report to file Fausto & Season Irdeto Custom Caids.txt)
********Emulation Conax/Cryptoworks -> added Caid definition (File Season.ini [SeasonCaid])
Tested with caid 0BAA & sub card worked great under FE Card support
Tested Cryptoworks caids with Fausto Emu worked without any prob
********Emulation Conax -> added Atr definition (File Season.ini [ConaxAtr])
********Emulation Cryptoworks -> Added Providers definition (Ident+Label) on file \Fausto\EMU\Season\CryptoworksProviders.ini

*Cards support: (File \Fausto\Emu\Cards\Cards.ini)
All datas concerning cards stored on new file \Fausto\Emu\Cards\Cards.ini
********Seca, Conax added support of frequency 6.00 MHZ for better performance
********Seca -> can unlock channel protected by parental code (ex: Seca French Card, Channel Canal+ -> XXX Movie)
********Conax -> added M2 card support or similar (no freeze at all, tested under 3.57 & 6.00 MHZ)
********Conax -> Possible to define Maturity level & Pin Code for unlocking channels
********VG2 -> added card baudrate auto detection or Set Baud wanted on INI file
********Cryptoworks -> possible to define on file AtrBauds, AtrParity, AtrStopBits, DataBauds, DataParity, DataStopBits according to the different cards
********Cryptoworks -> read card subcriptions
********Irdeto -> irdeto pure mode or irdeto xin1 supported (settings on cards.ini ECMFilter datas)
********Card log file modified more infos added

*Cards Client (cs):
********Fixed bug for Radegast server auto detection
********Added Gbox client (localhost only, default ports)
********Updated default local host servers list


*DVB Plugins:
********added Fixes for SSSP/HSIC
********added Optimizations, more faster

-Extra:
*Language files: New datas added ready for translation


Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie, Anunaki.
 
Last edited:

MIKAME

Super VIP
Messages
5,429
Fausto Version ALL HERE

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System


CS Client protocol supported:
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Version 1.36 (18/03/2009)
- Editor
********Caids File Edit
*Added Drag file function
*Added possibility to edit Comment line, Source list changes saved auto
********Export keys Files
*added Comment datas on caids.xml
*modified file Fausto_CAIDS.TXT
********Import Keys
*added somes coding system for filter selection selection (irdeto,betacrypt,conax)
*fixed somes problems


- Emulator
*Setup: New Tab for editing Fausto INI Files

*Season:
********Emulation Irdeto -> possible to define custom caids (report to file Fausto & Season Irdeto Custom Caids.txt)
********Emulation Conax/Cryptoworks -> added Caid definition (File Season.ini [SeasonCaid])
Tested with caid 0BAA & sub card worked great under FE Card support
Tested Cryptoworks caids with Fausto Emu worked without any prob
********Emulation Conax -> added Atr definition (File Season.ini [ConaxAtr])
********Emulation Cryptoworks -> Added Providers definition (Ident+Label) on file \Fausto\EMU\Season\CryptoworksProviders.ini

*Cards support: (File \Fausto\Emu\Cards\Cards.ini)
All datas concerning cards stored on new file \Fausto\Emu\Cards\Cards.ini
********Seca, Conax added support of frequency 6.00 MHZ for better performance
********Seca -> can unlock channel protected by parental code (ex: Seca French Card, Channel Canal+ -> XXX Movie)
********Conax -> added M2 card support or similar (no freeze at all, tested under 3.57 & 6.00 MHZ)
********Conax -> Possible to define Maturity level & Pin Code for unlocking channels
********VG2 -> added card baudrate auto detection or Set Baud wanted on INI file
********Cryptoworks -> possible to define on file AtrBauds, AtrParity, AtrStopBits, DataBauds, DataParity, DataStopBits according to the different cards
********Cryptoworks -> read card subcriptions
********Irdeto -> irdeto pure mode or irdeto xin1 supported (settings on cards.ini ECMFilter datas)
********Card log file modified more infos added

*Cards Client (cs):
********Fixed bug for Radegast server auto detection
********Added Gbox client (localhost only, default ports)
********Updated default local host servers list


*DVB Plugins:
********added Fixes for SSSP/HSIC
********added Optimizations, more faster

-Extra:
*Language files: New datas added ready for translation


Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie, Anunaki.
 

empb

SU Team: It's All Good (Fausto v1.45/Newcamd/vplug
Staff member
Administrator
Messages
10,231
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM




FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System




CS Cards server supported:

Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



CS Client protocol supported:
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Version 1.37 (23/05/2009)
- Editor
********Caids File Edit
Added possibility to edit/modify/save caid source file -> Press + button

- Emulator
*Monitor:
Added option Monitoring: tick the case to show datas (Ecm,Caid,Prid,keyid,Key,CW,Ch.infos)
by default set to ON

*Season:
********Emulation Conax -> Caid bug fixed

*DVB Plugins:
Made somes changes under MDAPI Wrapper to accruate compatibilities with more plugins
(=somes plugins not worked before worked now)

*Server:
Added cards servers for
Newcamd,
Radegast,
Camd33,
Camd35 TCP
Camd35 UDP
Report to Fausto & Cards servers.txt for details (Folder ..\Fausto)
It extend Fausto portabilities to more receivers
(tested Fausto Card server emu+cards with my Dreambox worked like a charm)

*Clients:
Modified incoming Card Information according to Fausto Server Manager
(ex under Radegast can get card detail from server)

*Setup
Cards.ini file modified
Section [VG]
- Now BoxID value must be entered in Hexadecimal value (ex: 01020304)
- Added new data "EchoByte"
#EchoByte Boolean value (0=false 1=True)
#example for sky Uk EchoByte=0
#example for sky Ita (0919), Viasat EchoByte=1

*Cards Support:
Added EMM support for card server
New VG Card supported: Sky Ita (0919) & Viasat

- Files settings :
FESettings.ini
Cards.ini,
Season.ini
IrdetoCustomCaids.ini
SecaProviders.ini
ViaccessProviders.ini
CryptoworksProviders.ini
Default Created only if existing not found


-Extra:
*Language files: New datas added ready for translation


Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie, Anunaki.


Enjoy.
 

kargo.25

Super VIP
Messages
9,725
FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System




CS Cards server supported:
Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



CS Client protocol supported:
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Version 1.38 (20/06/2009)
- Emulator

*Client:
Added Manager like for card server
Report to File Fausto ..\Fausto\EMU\CardClient\FaustoClients Example.Cfg for clients script
Report to File Fausto ..\Fausto\Fausto & Card Client.txt for details
Now all clients running at same time
Priorities defined by Server line order
NB: ClientBase.ini is useless, can be deleted after datas set on FaustoClients.cfg

*Card support:
VG: read tiers - Viasat better card init
Cards.ini file modified for VG, added optional datas: Atr, Parity & Stopbits
(rebuild default cards.ini for more details; delete existing and run Fausto emulator)

*Season:
Irdeto xin1: Added Cryptoworks caid selection under popup menu + somes minor changes
Seca, Cryptoworks made somes changes to make it better

-Files settings :
FESettings.ini modified due to changes on card client

-Extra:
*Language files: New datas added ready for translation
 
Last edited:

Verdeoro

VIP
Messages
1,529
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System




CS Cards server supported:
Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



CS Client protocol supported:
CCCam (TCP) tested with CCCam_2.1.1/CCCam_2.1.2
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Version 1.39_B (04/09/2009)
-Editor
Fixed Keys.bin file creation



Version 1.39 (04/09/2009)
- Emulator
Fixed problem with N3 prid, now ok with ecm & dcw

*Monitor: popup menu options (mouse right clic)
Under Auto Functions
Added Auto Start Servers & Clients
Added Auto Start Reader (phoenix mode), settings of reader stored on file Cards.ini (Freq & COM)
Fixed Auto Load KEYS file
Added Emulator On Startup -> if ticked emulator window loaded when Fausto application started
Fixed CW, Tracker, Monitoring settings saved on FESettings.Ini

*Clients: added CCcam support
-Tab Manager
Added CCCam server informations windows
Option avalaible ONLY for CCCam line
Double clic on CCCam client line to display server informations
NOTA: if Client manager not running window will be empty
Fausto Client CCCam.pdf file joined for details

*Servers:
added dvb pluggins support (can be shared too via server)
Added Local popup menu under tab Manager (start, stop, remove single server)
Modified ECM log Datas
Modified Log File Datas

*Season interface:
-optimized event manager
-Season Conax: accruate compatibilities now alphacrypt cam worked (Set Xsat=0 on season.ini)
-Season settings file
datas on section
[Emulator]
[CardClient]
[OfficialCards]
are now apply ONLY for season irdeto, others season emulation can retrieve provid auto
Added Data Xsat on section [ConaxAtr] for explanations report to file Fausto & Season INI File.txt
Delete existing Season.ini file to create a default one when Fausto emulator will be open
(Xsat data will be added used with Season Conax Emulation)

*Card support: irdeto card bug fix

Enjoy.
 
Last edited:

marcel

Super VIP
Messages
2,166
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM
Special thanks to s62,Snakie,Bordan,Rekordc & KarraKarra



FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System




CS Cards server supported:
Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



CS Client protocol supported:
CCCam (TCP) tested with CCCam_2.1.1/CCCam_2.1.2
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected


ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache


Flash information:
Fausto just get a kid, will be introduced to you on next weeks.
Stay tunned, FeKid will come soon...


Version 1.40 (23/10/2009)- Emulator

*Card Client:
- Settings file created auto if not exist (FaustoClients.cfg created from FaustoClients Example.cfg)
- Modified behaviour of log on file (report to file FaustoClients Example.cfg for changes)
CCCam: Code modified now will work better
CCcam: SID/CHID Filter somes problems solved
CCCam: Added Ignore Node Option (report to INODE syntax on file FaustoClients Example.cfg)
CCCam: Added Ignore Caid/Prids/Node option (report to ICPN syntax on file FaustoClients Example.cfg)
CCCam: Added Priority Node Option (report to PNODE syntax on file FaustoClients Example.cfg)
CCCam: Save CCCam server Informations to file

*Card Server:
- Settings file created auto if not exist (FaustoServers.cfg ceated from FaustoServers Example.cfg)
- Made somes changes on code, works better
- Modified behaviour of log on file (report to file FaustoServers Example.cfg for changes)
- Fixed problem with CHID filter

*Season Interface:
- Emulation Irdeto: Fixed problem with Irdeto2 ecm parsing
- All emulation: added inverse ECM header option under popup menu AFTER connection, now can get all benefit of cs cache
- Added default SID Value on file FESettings.ini, if not set somes package not decoded under cs (depend on server settings)

*Card Support:
- Fixed EMM update for irdeto card
- Log Traffic now set directly on file
Default File Name is Fausto Card Log.txt, datas saved on Fausto Folder
To Log Traffic, option must be enabled (press mouse right clic under Tab Cards, tick option Log Traffic)
Now Debug log is not necessary

*DVB Plugins:
Code modified


Special Thanks to:
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, Stauffie, Anunaki.
 

elgeneral

Registered
Messages
7,811
Fausto Version 1.41

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM
Special thanks to s62,Snakie,Bordan,Rekordc & KarraKarra




FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System



CS Cards Client supported:
CCCam (TCP)
Newcamd (TCP)
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)
Gbox client (localhost only, default ports)



CS Cards server supported:
Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



Support:
- Ethernet (linux box, diablo wifi,...)
- Box Serial Connection (SSSP/HSIC/TM SHARE)
- Season Interface (Cams/box Readers)
- Diablo Wireless (base unit)



Main Functions:
- Emulator
- Logger
- Net client
- Card server
- Cards support
- DVB Plugins (without pctv card)

Version 1.41 (23/12/2009)

For the first time joined Fausto For Linux Wine (worked too with windows os)

- Emulator
*Monitor: Popup Menu (mouse right clic)
- Added FeKid manual Load
- Added FeKid auto load at startup (under Auto Functions)

*Card Support:
Added Sky Ita Fix (0919/093B)

*DVB Plugins:
Code improved, better reply on caid/Prids filtered, datas logged modified
New Viaccess hack 2.6 working (caid:0500/Provider:023B00 on horbird with vplug)

*Card Client:
-Added Extented ECM/EMM Log window -> When client started, double clic on ECM/EMM log Window
To back to normal window log, double clic again on original log window (on emulator window)
-Added option CCCam server version/build on line definition (report to FaustoClients Example.cfg for details)
-Added option CCCam MAXID (report to FaustoClients Example.cfg for details)
-CCCam improved (better again)

*Card server:
-Newcamd better connection compatibility & accounts managment modified
-Added option TIMEOUT (Report to file FaustoServers Example.Cfg for details)
-Added option EMMBLOCKER (Report to file FaustoServers Example.Cfg for details)
-Added Extented ECM/EMM Log window -> When server start, double clic on ECM/EMM log Window
To back to normal window log, double clic again on original log window (on emulator window)

*Serial:
- Added Truman Share support (Now avalaible SSSP/HSIC/TM Share)

*Season Interface:
Emulation Conax:
Boot Sequence code improved -> accruate compatibilities with conax embedded reader
Emulation Irdeto:
- Multiple caids/prids can be used for same coding system
Report to Season.ini joined for changes
Possible to change the datas on fly
Clic on Tab Setup
Select file Season.ini
Made changes
Press saves button
New changes apply without re init season

*Extra
Added new datas on language files



Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, Stauffie, Anunaki.


Enjoy.
 

empb

SU Team: It's All Good (Fausto v1.45/Newcamd/vplug
Staff member
Administrator
Messages
10,231
New Fausto v1.43

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM
Special thanks to s62,Snakie,Bordan,Rekordc & KarraKarra




FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System



CS Cards Client supported:
CCCam (TCP)
Newcamd (TCP)
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)
Gbox client (localhost only, default ports)
Twin Protocol (Serial)


CS Cards server supported:
Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



Support:
- Ethernet (linux box, diablo wifi,...)
- SSSP/HSIC/TM Share/CSC (Serial)
- Season Interface (Cams/box Readers)
- Diablo Wireless (base unit)



Main Functions:
- Emulator
- Logger
- Net client
- Card server
- Cards support
- DVB Plugins (without pctv card)





Version 1.43 (15/03/2010)

- Editor
Modele.xml modified

- Emulator
*Settings files:
FeSettings.ini modified com parameters about season removed
Season.ini added com paremeters for each emulation (Irdeto,Seca,Viaccess,Cryptoworks,Conax)
To keep compatibilities with previous version FE use default settings
Report To Fausto & Season INI File.txt for more details
To create default settings file delete existing one, open emulator window and the new one will be created


*Serial:
- Added CSC ECM protocol support, 6 versions (Now avalaible SSSP/HSIC/TM Share/CSC ECM)
Tested with version:
* Titanium /technocam
* Tiger t6
* Starsat
* Dreamsky
* GlobalStar
* Technosat
Added settings file for named CSC_Cas_Datas.cfg (folder ..\Fausto\Serial\)
Settings file can be edited via tab SETUP
Choose CSC_Cas_Datas.cfg on file list
Press OPEN
Made changes
Press SAVE
Usefull only if ECM not comes from box, it others case NOT required


*Server:
Newcamd: Irdeto EMM code improved
Log File: can be produced without ECM Debug ON


*Client:
-Added possibility to set Connection Max delay
Report to file FaustoClients Example.cfg dor syntax & example (Folder Fausto\Emu\CardClient)
-Added Twin protocol
For client definition report to FaustoClients Example.cfg on folder \Fausto\Emu\CardClient
For more informations read file Fausto & Card Client.txt
Joined file twin_cache.cfg (Folder Fausto\Emu\CardClient) with somes channels example, add your own
-CCcam:
Accruate compatibilities with Nagra3 provider (specially with card read by Newcs)
Added default provider zeroed when only caid defined for a card
-Log File: can be produced without ECM Debug ON


*Cards:
TNTSat Default AES key added if not set on Cards.ini file
Sky Ita card fix


*Setup:
Added posibilities to edit file
CSC_Cas_Datas.cfg
twin_cache.cfg
Include syntax definition


*Language file:
Added [Strings] datas
Added Russian language file thanks to the author



Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, Stauffie, Anunaki.


Enjoy.
 

Ramzen

Registered User
Messages
1,507
Fausto v1.44 (08/05/2010)

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM
Special thanks to s62,Snakie,Bordan,Rekordc,KarraKarra & AR@$H



Special thanks to Pharaons Team



FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System



CS Cards Client supported:
CCCam (TCP)
Newcamd (TCP)
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)
Gbox Listener (localhost only, default ports)
Twin Protocol (Serial)
Gbox (UDP)


CS Cards server supported:
Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



Support:
- Ethernet (linux box, diablo wifi,...)
- SSSP/HSIC/TM Share/CSC (Serial)
- Season Interface (Cams/box Readers)
- Diablo Wireless (base unit)



Main Functions:
- Emulator
- Logger
- Net client
- Card server
- Cards support
- DVB Plugins (without pctv card)





Version 1.44 (08/05/2010)

- Emulator
Viaccess 2.6 called ONLY if Caid/Provider/Key in use set on Keys File (Will use internal key)
example: 0500:021110:08:02:[00000000000000000000000000000000]; ART/JSC

*Card Client:
-Added Gbox Client
Report To FaustoClients Example.cfg for Gbox Line definition
Double clic on GBOX client line to display server informations
NOTA: if Client manager not running window will be empty
Filters supported:
Chid,Sid,Maxid in FaustoClients.cfg file
Enable/Disable card: under Gbox Server Infos (doublie clic on line wanted)
# syntax for GBOX client connection
# GBOX: <clienthost> <clientport> <clientpass> <serverhost> <serverport> <serverpass>
# clienthost/clientport = ip/host name & port of your network
# clientpass = to enable server access
# serverhost/serverport = ip/host name & port of server
# serverpass = to enable access from client
# example:
# GBOX: 127.0.0.1 24444 34567890 server.ip.net 44444 12345678

*Season Interface
Possible to set 0 for delay under Interface (tab Season) & Emulation Profile (Season.ini file)

*Card Support
-Conax: fixed problem with somes conax card & emm (ex: now Tring card 0BAA worked perfectly)



Special Thanks to:
JKF Intersat for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, Stauffie, Anunaki.


Enjoy.
 

elgeneral

Registered
Messages
7,811
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM
Special thanks to s62,Snakie,Bordan,Rekordc,KarraKarra & AR@$H





FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe (But must have installed previous version v1.44)


Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System



CS Cards Client supported:
CCCam (TCP)
Newcamd (TCP)
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)
Gbox Listener (localhost only, default ports)
Twin Protocol (Serial)
Gbox (UDP)


CS Cards server supported:
Newcamd (TCP) & EMM Support
RadeGast (TCP)
Camd35 (UDP cs357x)
Camd35 (TCP cs378x)
Camd33 (TCP)



Support:
- Ethernet (linux box, diablo wifi,...)
- SSSP/HSIC/TM Share/CSC (Serial)
- Season Interface (Cams/box Readers)
- Diablo Wireless (base unit)



Main Functions:
- Emulator
- Logger
- Net client
- Card server
- Cards support
- DVB Plugins (without pctv card)




IMPORTANT: for user Windows Vista or Windows7 change Fausto.exe properties to Compatibility Windows XP2/3 to prevent any problems :wowr:



Version 1.45 (23/06/2010)

- Emulator

Viaccess 2.6/3.X: keys are now defined on keys file (XML or BIN)
BIS TV & CSAT tested & worked (load keys.bin file joined under MONITOR)

*Monitor:
Added option ECM/EMM Offline decoding
Report to File Fausto_ECMOfflineDecoding.txt for more details

*Tracker:
-Added Extented Tracker Log window -> double clic on Tracker log Window
To back to normal window log, double clic again on original log window

*Card Client:
Newcamd: send keep alive command to server
Newcamd: Added datas SIDOVERRIDE report to FaustoClients_Example.cfg for syntax & definition
CCCam: code improved (io handler modified too)
Gbox: connection improved (tested with Mbox worked)
Gbox: Connection Line status modified: if no shares from server at connection, status = FAILED
Gbox: Added CardId on ECM Log

*Serial:
Added HomeShare protocol
Code improved & usb to com cable worked too

*Cards Support:
Viaccess: TNTSat Card Fix
Nagra 2/3: EMM support Fix (prid definition on FE server N Line {1803/007001 007101} to got emms from client, Mgcamd Tested)
Irdeto: added australian card support (report to file ..\Fausto\EMU\Cards\cards.ini for datas, delete existing file to create new one updated with new datas)
Viaccess: new datas atrbaud,datasbauds,parity,StopBits inserted on Cards.ini file (delete existing file to create new one)

*Season Interface:
Season Profile: new datas inserted under Season.Ini file (ATR for all emulation, COCO for Irdeto)
Season Profile: Structure file modified (somes datas changed place)
Delete Season.ini file before Install Fausto, will be recreated auto with new datas

*Extras:
Languages files updated due to new changes


Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, Stauffie, Anunaki.


Enjoy.
 
Top