Unicam Module - Lastest Release

(Emu) Pacific 4.07 Unicam Evo 4.0


Change Log for Pacific firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- Telenet (Belgium) emulation

v04.07:
------------
- fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer
- fixed TNTsat smartcard support
- fixed TNTsat emulator support

v04.06:
------------
- fixed descrambling of CSat smartcard on HD channels

v04.05:
------------
- fixed a bug on editing keys and not allowing further changes
- fixed KD K02 smartcard reading
- rearranged CAM's menu for smartcards
- fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
- improved seca EMM handling in case of 2 or more providers used together in the same card
- fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
- fixed a bug on factory reset when expert menu is enabled

v04.04:
------------
- fixed *** sky de v13 smartcard with Fastmode+ enabled

v04.03:
------------
- optimized channel switching speed
- fixed ac3/dolby audio for sky de channels
- improved auto-ecm manager for better channel switching speed
- improved *** fastmode for all *** smartcards
- fixed CAID list updates with dynamic mode when editing keys by MMI
- some minor bugfixes and stability improvements

v04.02:
------------
- fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
- fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
- fixed a bug with MTD on Kathrein STBs
- added support for 8x MTD channels

v04.01:
------------
- first public release with new core


===========================================================


Troja 4.07 Unicam Evo 4.0


Change Log for Troja firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support

v04.07:
------------
- fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer
- fixed TNTsat smartcard support

v04.06:
------------
- fixed descrambling of CSat smartcard on HD channels

v04.05:
------------
- fixed KD K02 smartcard reading
- rearranged CAM's menu for smartcards
- fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
- improved seca EMM handling in case of 2 or more providers used together in the same card
- fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
- fixed a bug on factory reset when expert menu is enabled

v04.04:
------------
- fixed *** sky de v13 smartcard with Fastmode+ enabled

v04.03:
------------
- optimized channel switching speed
- fixed ac3/dolby audio for sky de channels
- improved auto-ecm manager for better channel switching speed
- improved *** fastmode for all *** smartcards
- some minor bugfixes and stability improvements

v04.02:
------------
- fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
- fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
- fixed a bug with MTD on Kathrein STBs
- added support for 8x MTD channels

v04.01:
------------
- first public release with new core

================================
Change Log for Troja firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support

v04.08:

------------
- improved priority management for smartcard's updates
- fixed TNTsat smartcard support

Change Log for Troja firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support

v04.09:
------------
- fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels)


========================================================


Change Log for Pacific firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- Telenet (Belgium) emulation

v04.09:
------------
- fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels)
- fixed TNTsat emulator support with latest changes of 20/06/2014 (only SD channels)

Change Log for Troja firmware
================================

---------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support

v04.10:
------------
- reverted changes done on version 4.07 for nagravision cards, this fixes freeze problems
- fixed TNTsat smartcard support with latest changes of 24/06/2014 (SD and HD channels)

v04.09:
------------
- fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels)

v04.08:
------------
- fixed translation of Back in the Info menu using German language
- improved priority management for smartcard's updates
- fixed TNTsat smartcard support

v04.07:
------------
- fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer
- fixed TNTsat smartcard support

v04.06:
------------
- fixed descrambling of CSat smartcard on HD channels

v04.05:
------------
- fixed KD K02 smartcard reading
- rearranged CAM's menu for smartcards
- fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
- improved seca EMM handling in case of 2 or more providers used together in the same card
- fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
- fixed a bug on factory reset when expert menu is enabled

v04.04:
------------
- fixed *** sky de v13 smartcard with Fastmode+ enabled

v04.03:
------------
- optimized channel switching speed
- fixed ac3/dolby audio for sky de channels
- improved auto-ecm manager for better channel switching speed
- improved *** fastmode for all *** smartcards
- some minor bugfixes and stability improvements

v04.02:
------------
- fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
- fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
- fixed a bug with MTD on Kathrein STBs
- added support for 8x MTD channels

v04.01:
------------
- first public release with new core

======================================================

Change Log for Pacific firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- Telenet (Belgium) emulation

v04.10:
------------
- reverted changes done on version 4.07 for nagravision cards, this fixes freeze problems
- fixed TNTsat smartcard support with latest changes of 24/06/2014 (SD and HD channels)
- fixed TNTsat emulator support with latest changes of 24/06/2014 (SD and HD channels)

v04.09:
------------
- fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels)
- fixed TNTsat emulator support with latest changes of 20/06/2014 (only SD channels)

v04.08:
------------
- fixed translation of Back in the Info menu using German language
- improved priority management for smartcard's updates
- fixed TNTsat smartcard support
- fixed TNTsat emulator support

v04.07:
------------
- fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer
- fixed TNTsat smartcard support
- fixed TNTsat emulator support

v04.06:
------------
- fixed descrambling of CSat smartcard on HD channels

v04.05:
------------
- fixed a bug on editing keys and not allowing further changes
- fixed KD K02 smartcard reading
- rearranged CAM's menu for smartcards
- fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
- improved seca EMM handling in case of 2 or more providers used together in the same card
- fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
- fixed a bug on factory reset when expert menu is enabled

v04.04:
------------
- fixed *** sky de v13 smartcard with Fastmode+ enabled

v04.03:
------------
- optimized channel switching speed
- fixed ac3/dolby audio for sky de channels
- improved auto-ecm manager for better channel switching speed
- improved *** fastmode for all *** smartcards
- fixed CAID list updates with dynamic mode when editing keys by MMI
- some minor bugfixes and stability improvements

v04.02:
------------
- fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
- fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
- fixed a bug with MTD on Kathrein STBs
- added support for 8x MTD channels

v04.01:
------------
- first public release with new core

Troja 4.11 Unicam EvoTwin 4.03.0 (mit Upgrade auf 4.x)

================================
Change Log for Troja firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support

v04.11:
------------
- added TNTsat auto update for ECM keys, this fixes TNTsat for SD channels

v04.10:
------------
- reverted changes done on version 4.07 for nagravision cards, this fixes freeze problems
- fixed TNTsat smartcard support with latest changes of 24/06/2014 (only SD channels)

v04.09:
------------
- fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels)

v04.08:
------------
- fixed translation of Back in the Info menu using German language
- improved priority management for smartcard's updates
- fixed TNTsat smartcard support

v04.07:
------------
- fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer
- fixed TNTsat smartcard support

v04.06:
------------
- fixed descrambling of CSat smartcard on HD channels

v04.05:
------------
- fixed KD K02 smartcard reading
- rearranged CAM's menu for smartcards
- fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
- improved seca EMM handling in case of 2 or more providers used together in the same card
- fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
- fixed a bug on factory reset when expert menu is enabled

v04.04:
------------
- fixed *** sky de v13 smartcard with Fastmode+ enabled

v04.03:
------------
- optimized channel switching speed
- fixed ac3/dolby audio for sky de channels
- improved auto-ecm manager for better channel switching speed
- improved *** fastmode for all *** smartcards
- some minor bugfixes and stability improvements

v04.02:
------------
- fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
- fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
- fixed a bug with MTD on Kathrein STBs
- added support for 8x MTD channels

v04.01:
------------
- first public release with new core

============================================================

Pacific 4.11 Unicam EvoTwin 4.03.0 (mit Upgrade auf 4.x)

================================
Change Log for Pacific firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- Telenet (Belgium) emulation

v04.11:
------------
- added TNTsat auto update for ECM keys, this fixes TNTsat for SD channels

v04.10:
------------
- reverted changes done on version 4.07 for nagravision cards, this fixes freeze problems
- fixed TNTsat smartcard support with latest changes of 24/06/2014 (only SD channels)
- fixed TNTsat emulator support with latest changes of 24/06/2014 (only SD channels)

v04.09:
------------
- fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels)
- fixed TNTsat emulator support with latest changes of 20/06/2014 (only SD channels)

v04.08:
------------
- fixed translation of Back in the Info menu using German language
- improved priority management for smartcard's updates
- fixed TNTsat smartcard support
- fixed TNTsat emulator support

v04.07:
------------
- fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer
- fixed TNTsat smartcard support
- fixed TNTsat emulator support

v04.06:
------------
- fixed descrambling of CSat smartcard on HD channels

v04.05:
------------
- fixed a bug on editing keys and not allowing further changes
- fixed KD K02 smartcard reading
- rearranged CAM's menu for smartcards
- fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
- improved seca EMM handling in case of 2 or more providers used together in the same card
- fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
- fixed a bug on factory reset when expert menu is enabled

v04.04:
------------
- fixed *** sky de v13 smartcard with Fastmode+ enabled

v04.03:
------------
- optimized channel switching speed
- fixed ac3/dolby audio for sky de channels
- improved auto-ecm manager for better channel switching speed
- improved *** fastmode for all *** smartcards
- fixed CAID list updates with dynamic mode when editing keys by MMI
- some minor bugfixes and stability improvements

v04.02:
------------
- fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
- fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
- fixed a bug with MTD on Kathrein STBs
- added support for 8x MTD channels

v04.01:
------------

Troja 4.12


Changelog:


verbesserter Code für *** Smartcards
improved code for *** smartcards



Special stuff:

- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- AU (Auto-Update) for TNT SAT SurEncryption key - 8X MTD
- 8X MTD
- *** FastMode+ to further improve MTD performance


======================================================

Pacific 4.12


Changelog:



verbesserter Code für *** Smartcards
improved code for *** smartcards
Fehler im Bulsatcom-Emulator beseitigt
fixed a bug on bulsatcom emulator



Special stuff:

- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- AU (Auto-Update) for TNT SAT SurEncryption key - 8X MTD
- 8X MTD
- *** FastMode+ to further improve MTD performance
- Telenet (Belgium) emulation

UNICAM-EVO CAM 4.0-Pacific_4.13

================================
Change Log for Pacific firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- prevention of 999x error on Sky Italy smartcards
- Telenet (Belgium) emulation

v04.13:
------------
- fixed a compatibility issue with Panasonic TVs when using Sky Germany smartcards that were creating CI communication issues
- added an option on the CAM's menu to prevent the pairing on Sky Germany smartcards (if you want to manage it manually check the blockemm-bylen function on RSA-Box key file)
- fixed a regression bug on Viasat 090F *** smartcards
- fixed a rare bug with Sky Italy 09CD smartcards when trying to open a channel

v04.12:
------------
- fixed a bug on bulsatcom emulator
- improved code for *** smartcards (999x errors should be prevented from now on)

v04.11:
------------
- added TNTsat auto update for ECM keys, this fixes TNTsat for SD channels

v04.10:
------------
- reverted changes done on version 4.07 for nagravision cards, this fixes freeze problems
- fixed TNTsat smartcard support with latest changes of 24/06/2014 (only SD channels)
- fixed TNTsat emulator support with latest changes of 24/06/2014 (only SD channels)

v04.09:
------------
- fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels)
- fixed TNTsat emulator support with latest changes of 20/06/2014 (only SD channels)

v04.08:
------------
- fixed translation of Back in the Info menu using German language
- improved priority management for smartcard's updates
- fixed TNTsat smartcard support
- fixed TNTsat emulator support

v04.07:
------------
- fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer
- fixed TNTsat smartcard support
- fixed TNTsat emulator support

v04.06:
------------
- fixed descrambling of CSat smartcard on HD channels

v04.05:
------------
- fixed a bug on editing keys and not allowing further changes
- fixed KD K02 smartcard reading
- rearranged CAM's menu for smartcards
- fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
- improved seca EMM handling in case of 2 or more providers used together in the same card
- fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
- fixed a bug on factory reset when expert menu is enabled

v04.04:
------------
- fixed *** sky de v13 smartcard with Fastmode+ enabled

v04.03:
------------
- optimized channel switching speed
- fixed ac3/dolby audio for sky de channels
- improved auto-ecm manager for better channel switching speed
- improved *** fastmode for all *** smartcards
- fixed CAID list updates with dynamic mode when editing keys by MMI
- some minor bugfixes and stability improvements

v04.02:
------------
- fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
- fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
- fixed a bug with MTD on Kathrein STBs
- added support for 8x MTD channels

v04.01:
------------
- first public release with new core

================================================================

UNICAM-EVO CAM 4.0-Troja_4.13

================================
Change Log for Troja firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- prevention of 999x error on Sky Italy smartcards

v04.13:
------------
- fixed a compatibility issue with Panasonic TVs when using Sky Germany smartcards that were creating CI communication issues
- added an option on the CAM's menu to prevent the pairing on Sky Germany smartcards (if you want to manage it manually check the blockemm-bylen function on RSA-Box key file)
- fixed a regression bug on Viasat 090F *** smartcards
- fixed a rare bug with Sky Italy 09CD smartcards when trying to open a channel

v04.12:
------------
- improved code for *** smartcards (999x errors should be prevented from now on)

v04.11:
------------
- added TNTsat auto update for ECM keys, this fixes TNTsat for SD channels

v04.10:
------------
- reverted changes done on version 4.07 for nagravision cards, this fixes freeze problems
- fixed TNTsat smartcard support with latest changes of 24/06/2014 (only SD channels)

v04.09:
------------
- fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels)

v04.08:
------------
- fixed translation of Back in the Info menu using German language
- improved priority management for smartcard's updates
- fixed TNTsat smartcard support

v04.07:
------------
- fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer
- fixed TNTsat smartcard support

v04.06:
------------
- fixed descrambling of CSat smartcard on HD channels

v04.05:
------------
- fixed KD K02 smartcard reading
- rearranged CAM's menu for smartcards
- fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
- improved seca EMM handling in case of 2 or more providers used together in the same card
- fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
- fixed a bug on factory reset when expert menu is enabled

v04.04:
------------
- fixed *** sky de v13 smartcard with Fastmode+ enabled

v04.03:
------------
- optimized channel switching speed
- fixed ac3/dolby audio for sky de channels
- improved auto-ecm manager for better channel switching speed
- improved *** fastmode for all *** smartcards
- some minor bugfixes and stability improvements

v04.02:
------------
- fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
- fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
- fixed a bug with MTD on Kathrein STBs
- added support for 8x MTD channels

v04.01:
------------
- first public release with new core

UNICAM-EVO CAM VERSION 3-4 TROJA 4.14

================================
Change Log for Troja firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- prevention of 999x error on Sky Italy smartcards

v04.14:
------------
- fixed TNTsat smartcard support for HD channels

==========================================================

UNICAM-EVO CAM VERSION 3-4- PACIFIC 4.14

================================
Change Log for Pacific firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- prevention of 999x error on Sky Italy smartcards
- Telenet (Belgium) emulation

v04.14:
------------
- fixed TNTsat smartcard support for HD channels
- fixed TNTsat emulator support for HD channels
- fixed ANT1 viaccess emulator

Pacific 4.15 Unicam Evo/Twin 4.0/3.0 (mit Upgrade auf 4.x)

verzögerten Start mit ***-Smartcards behoben
fixed the latency on *** smartcard boot
Bei Wechsel zwischen Troja und Pacific bleiben die Cam-Einstellungen erhalten
if you switch from troja to pacific settings are now kept the same
verbesserte Handhabung von ECMs und EMMs, wenn die erste ECM-PID-Auswahl fehlschlägt
improved handling of ECMs and EMMs when the first ECM pid selected fails
Problem beim Zähler der Smartkartenresets im Cam-Menü behoben
fixed the smartcard reset counter in the CAM's menu




Special stuff:

- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- Telenet (Belgium) emulation
- improved code for *** smartcards (999x errors should be prevented from now on)
- AU (Auto-Update) for TNT SAT SurEncryption key
- 8X MTD
- *** FastMode+ to further improve MTD performance
- option on the CAM's menu to prevent the pairing on Sky Germany smartcards


===============================================================


Troja 4.15 Unicam Evo/Twin 4.0/3.0 (mit Upgrade auf 4.x)


verzögerten Start mit ***-Smartcards behoben
fixed the latency on *** smartcard boot
Bei Wechsel zwischen Troja und Pacific bleiben die Cam-Einstellungen erhalten
if you switch from troja to pacific settings are now kept the same
verbesserte Handhabung von ECMs und EMMs, wenn die erste ECM-PID-Auswahl fehlschlägt
improved handling of ECMs and EMMs when the first ECM pid selected fails
Problem beim Zähler der Smartkartenresets im Cam-Menü behoben
fixed the smartcard reset counter in the CAM's menu




Special stuff:

- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- improved code for *** smartcards (999x errors should be prevented from now on)
- AU (Auto-Update) for TNT SAT SurEncryption key
- 8X MTD
- *** FastMode+ to further improve MTD performance
- option on the CAM's menu to prevent the pairing on Sky Germany smartcards

Troja 4.16 Unicam Evo/Twin 4.0/3.0 (mit Upgrade auf 4.x)

Changelog:


Problem, dass fehlerhafte Einstellungen EMM komplett deaktivieren können, wurde behoben
Broken settings could lead to EMM being disabled completely
Das Fuse Byte wird nun im *** Smartkarten Menü angezeigt
Fuse Byte value is now shown on *** smartcards menu


Special stuff:

- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- improved code for *** smartcards (999x errors should be prevented from now on)
- AU (Auto-Update) for TNT SAT SurEncryption key
- 8X MTD
- *** FastMode+ to further improve MTD performance
- option on the CAM's menu to prevent the pairing on Sky Germany smartcards

=======================================================

Pacific 4.16 Unicam Evo/Twin 4.0/3.0 (mit Upgrade auf 4.x


Changelog:


Fehler beim TNTsat Emulator auf Sendern mit multi Pids beseitigt
fixed TNTsat emulator on channels with multi pids
Problem, dass fehlerhafte Einstellungen EMM komplett deaktivieren können, wurde behoben
Broken settings could lead to EMM being disabled completely
Das Fuse Byte wird nun im *** Smartkarten Menü angezeigt
Fuse Byte value is now shown on *** smartcards menu



Special stuff:

- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- Telenet (Belgium) emulation
- improved code for *** smartcards (999x errors should be prevented from now on)
- AU (Auto-Update) for TNT SAT SurEncryption key
- 8X MTD
- *** FastMode+ to further improve MTD performance
- option on the CAM's menu to prevent the pairing on Sky Germany smartcards

================================
Change Log for Troja firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- TNTsat smartcards reading support for HD channels
- prevention of 999x error on Sky Italy smartcards

v04.18:
------------
- fixed a bug on filtering EMMs in few rare cases were they were discarded by the hardware (this fixes totally the problem of updates with SRG)
- improved the booting of the CAM with devices that are using too strict timings on boot
- added support for 0D98 ICE smartcard
- rewrote the code for managing PMTs better and safer
- added ChIDs on Irdeto smartcard entitlements menu
- default caid list is now updated according to latest changes
- fixed a bug on sending EMMs to betacrypt tunneled smartcards

v04.17:
------------
- fixed a minor bug on boot for few Samsung TVs
- tier ID is now shown on *** smartcards menu
- added block of Sky DE 07 EMMs

v04.16:
------------
- fixed a minor bug on settings that could imply the EMMs stop to work
- Fuse Byte value is now shown on *** smartcards menu

v04.15:
------------
- fixed the latency on *** smartcard boot
- if you switch from troja to pacific settings are now kept the same
- improved handling of ECMs and EMMs when the first ECM pid selected fails
- fixed the smartcard reset counter in the CAM's menu

v04.14:
------------
- fixed TNTsat smartcard support for HD channels

v04.13:
------------
- fixed a compatibility issue with Panasonic TVs when using Sky Germany smartcards that were creating CI communication issues
- added an option on the CAM's menu to prevent the pairing on Sky Germany smartcards (if you want to manage it manually check the blockemm-bylen function on RSA-Box key file)
- fixed a regression bug on Viasat 090F *** smartcards
- fixed a rare bug with Sky Italy 09CD smartcards when trying to open a channel

v04.12:
------------
- improved code for *** smartcards (999x errors should be prevented from now on)

v04.11:
------------
- added TNTsat auto update for ECM keys, this fixes TNTsat for SD channels

v04.10:
------------
- reverted changes done on version 4.07 for nagravision cards, this fixes freeze problems
- fixed TNTsat smartcard support with latest changes of 24/06/2014 (only SD channels)

v04.09:
------------
- fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels)

v04.08:
------------
- fixed translation of Back in the Info menu using German language
- improved priority management for smartcard's updates
- fixed TNTsat smartcard support

v04.07:
------------
- fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer
- fixed TNTsat smartcard support

v04.06:
------------
- fixed descrambling of CSat smartcard on HD channels

v04.05:
------------
- fixed KD K02 smartcard reading
- rearranged CAM's menu for smartcards
- fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
- improved seca EMM handling in case of 2 or more providers used together in the same card
- fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
- fixed a bug on factory reset when expert menu is enabled

v04.04:
------------
- fixed *** sky de v13 smartcard with Fastmode+ enabled

v04.03:
------------
- optimized channel switching speed
- fixed ac3/dolby audio for sky de channels
- improved auto-ecm manager for better channel switching speed
- improved *** fastmode for all *** smartcards
- some minor bugfixes and stability improvements

v04.02:
------------
- fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
- fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
- fixed a bug with MTD on Kathrein STBs
- added support for 8x MTD channels

v04.01:
------------
- first public release with new core

================================
Change Log for Pacific firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- TNTsat smartcards reading support for HD channels
- prevention of 999x error on Sky Italy smartcards
- Telenet (Belgium) emulation

v04.18:
------------
- fixed a bug on filtering EMMs in few rare cases were they were discarded by the hardware (this fixes totally the problem of updates with SRG)
- improved the booting of the CAM with devices that are using too strict timings on boot
- added support for 0D98 ICE smartcard
- rewrote the code for managing PMTs better and safer
- added ChIDs on Irdeto smartcard entitlements menu
- default caid list is now updated according to latest changes
- fixed a bug on sending EMMs to betacrypt tunneled smartcards
- fixed Idman TV channel for Digiturk cryptoworks emulator

v04.17:
------------
- fixed a minor bug on boot for few Samsung TVs
- tier ID is now shown on *** smartcards menu
- added block of Sky DE 07 EMMs

v04.16:
------------
- fixed TNTsat emulator on channels with multi pids
- fixed a minor bug on settings that could imply the EMMs stop to work
- Fuse Byte value is now shown on *** smartcards menu

v04.15:
------------
- fixed the latency on *** smartcard boot
- if you switch from troja to pacific settings are now kept the same
- improved handling of ECMs and EMMs when the first ECM pid selected fails
- fixed the smartcard reset counter in the CAM's menu

v04.14:
------------
- fixed TNTsat smartcard support for HD channels
- fixed TNTsat emulator support for HD channels
- fixed ANT1 viaccess emulator

v04.13:
------------
- fixed a compatibility issue with Panasonic TVs when using Sky Germany smartcards that were creating CI communication issues
- added an option on the CAM's menu to prevent the pairing on Sky Germany smartcards (if you want to manage it manually check the blockemm-bylen function on RSA-Box key file)
- fixed a regression bug on Viasat 090F *** smartcards
- fixed a rare bug with Sky Italy 09CD smartcards when trying to open a channel

v04.12:
------------
- fixed a bug on bulsatcom emulator
- improved code for *** smartcards (999x errors should be prevented from now on)

v04.11:
------------
- added TNTsat auto update for ECM keys, this fixes TNTsat for SD channels

v04.10:
------------
- reverted changes done on version 4.07 for nagravision cards, this fixes freeze problems
- fixed TNTsat smartcard support with latest changes of 24/06/2014 (only SD channels)
- fixed TNTsat emulator support with latest changes of 24/06/2014 (only SD channels)

v04.09:
------------
- fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels)
- fixed TNTsat emulator support with latest changes of 20/06/2014 (only SD channels)

v04.08:
------------
- fixed translation of Back in the Info menu using German language
- improved priority management for smartcard's updates
- fixed TNTsat smartcard support
- fixed TNTsat emulator support

v04.07:
------------
- fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer
- fixed TNTsat smartcard support
- fixed TNTsat emulator support

v04.06:
------------
- fixed descrambling of CSat smartcard on HD channels

v04.05:
------------
- fixed a bug on editing keys and not allowing further changes
- fixed KD K02 smartcard reading
- rearranged CAM's menu for smartcards
- fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
- improved seca EMM handling in case of 2 or more providers used together in the same card
- fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
- fixed a bug on factory reset when expert menu is enabled

v04.04:
------------
- fixed *** sky de v13 smartcard with Fastmode+ enabled

v04.03:
------------
- optimized channel switching speed
- fixed ac3/dolby audio for sky de channels
- improved auto-ecm manager for better channel switching speed
- improved *** fastmode for all *** smartcards
- fixed CAID list updates with dynamic mode when editing keys by MMI
- some minor bugfixes and stability improvements

v04.02:
------------
- fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
- fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
- fixed a bug with MTD on Kathrein STBs
- added support for 8x MTD channels

v04.01:
------------
- first public release with new core

All_Pacific 4.20


================================
Change Log for Pacific firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- TNTsat smartcards reading support for HD channels
- Telenet (Belgium) emulation

v04.20:
------------
- fixed humax icord recordings bug introduced on version 4.18
- fixed booting issues introduced with version 4.18 on Topfield TF7700
- reverted back the force nagra mode to "yes" by default (seems a better solution for most of cards)

================================
All_Troja 4.20


Change Log for Troja firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- TNTsat smartcards reading support for HD channels

v04.20:
------------
- fixed humax icord recordings bug introduced on version 4.18
- fixed booting issues introduced with version 4.18 on Topfield TF7700
- reverted back the force nagra mode to "yes" by default (seems a better solution for most of cards)

Change Log for Pacific firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- TNTsat smartcards reading support for HD channels
- Telenet (Belgium) emulation

v04.21:
------------
- fixed a bug on cam init with enigma2 images
- improved the switching of dynamic caid
- fixed a bug when AutoPMT was set to on that didn't allow to update ecm pids
- CAT is now processed also on FTA channels if the host sends the PMT
- fixed a bug introduced on version 4.18 when resetting smartcards
- fixed a bug when managing errors that occur on smartcards

Troja 4.22/Pacific 4.22 für Unicam Evo/Twin 4.0/3.0 (mit Upgrade auf 4.x)

Troja 4.22

Changelog:


Problem von Abstürzen beim Betreten des Smartkarten Info Menü behoben
fixed potential crash when entering the smartcard's info menu
Fehler im Info Menü beim Anzeigen der Seriennummer von Betacrypt Smartkarten behoben
fixed a bug on showing serial number for betacrypt smartcards in the info menu
Überarbeitete und verbesserte Anzeige der Berechtigungen im Menü
reorganized the entitlements menu for all codifies with a better output
Der Sky Paarung Präventionsmechanismus ist nun standardmäßig nach einem "Clear CAM" oder zurücksetzen auf Werkseinstellungen aktiviert
Sky pairing prevention mechanism is now enabled by default after a “Clear CAM” or factory reset
Fastmode ist in den Standardeinstellung wieder deaktiviert, um Probleme mit einigen Geräten durch die längere Bootzeit zu verhindern
FastMode is disabled by default again to prevent problems with some devices due to longer boot times
Fehler behoben bei MTD für Tivusat und allen anderen Sendern mit dem selben Anbieter und ECM Pid
fixed MTD for tivusat (and all channels that uses same provider and ecm pid)
Problem bei den Einstellungen von Fastmode mit einigen Smartkarten behoben
fixed the setting of FastMode on some smartcards not working previously
Verwaltung von Fällen bei falsch oder fehlerhaft ankommenden ECMs oder defekten Daten hinzugefügt (beugt eingefrorenen Bildern am TV vor)
added management of cases when a fake ECM or corruted data is received (this will prevent freezes on TV)
Special stuff:
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- AU (Auto-Update) for TNT SAT SurEncryption key
- 8X MTD
- *** FastMode+ to further improve MTD performance
- Sky DE V13/V14 pairing prevention mechanism

Ab Troja/Pacific Firmware 4.17 sind die Mechanismen zur Vorbeugung der Paarung von Sky Deutschland Smartkarten grundlegend geändert bzw. erweitert worden. Es werden standardmäßig nicht mehr EMMs nach deren Länge, sondern primär sämtliche potentiell gefährlichen EMMs vom Typ 07 geblockt. Zusätzlich wird das Pairing-EMM mit der Länge 119 (0x77) geblockt, welches Sky bei mehrfacher manueller Anforderung der Aktivierung über das Kundenportal an die entsprechende Karte schickt.
Damit sollten nun Karten-Erstaktivierungen sowie Sky Select PPV Aktivierungen wieder funktionieren.

Pacific 4.22
Changelog: Problem von Abstürzen beim Betreten des Smartkarten Info Menü behoben
fixed potential crash when entering the smartcard's info menu
Fehler im Info Menü beim Anzeigen der Seriennummer von Betacrypt Smartkarten behoben
fixed a bug on showing serial number for betacrypt smartcards in the info menu
Überarbeitete und verbesserte Anzeige der Berechtigungen im Menü
reorganized the entitlements menu for all codifies with a better output
Der Sky Paarung Präventionsmechanismus ist nun standardmäßig nach einem "Clear CAM" oder zurücksetzen auf Werkseinstellungen aktiviert
Sky pairing prevention mechanism is now enabled by default after a “Clear CAM” or factory reset
Fastmode ist in den Standardeinstellung wieder deaktiviert, um Probleme mit einigen Geräten durch die längere Bootzeit zu verhindern
FastMode is disabled by default again to prevent problems with some devices due to longer boot times
Fehler behoben bei MTD für Tivusat und allen anderen Sendern mit dem selben Anbieter und ECM Pid
fixed MTD for tivusat (and all channels that uses same provider and ecm pid)
Problem bei den Einstellungen von Fastmode mit einigen Smartkarten behoben
fixed the setting of FastMode on some smartcards not working previously
Verwaltung von Fällen bei falsch oder fehlerhaft ankommenden ECMs oder defekten Daten hinzugefügt (beugt eingefrorenen Bildern am TV vor)
added management of cases when a fake ECM or corruted data is received (this will prevent freezes on TV)

Special stuff:
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- Telenet (Belgium) emulation
- AU (Auto-Update) for TNT SAT SurEncryption key
- 8X MTD
- *** FastMode+ to further improve MTD performance
- Sky DE V13/V14 pairing prevention mechanism

Ab Troja/Pacific Firmware 4.17 sind die Mechanismen zur Vorbeugung der Paarung von Sky Deutschland Smartkarten grundlegend geändert bzw. erweitert worden. Es werden standardmäßig nicht mehr EMMs nach deren Länge, sondern primär sämtliche potentiell gefährlichen EMMs vom Typ 07 geblockt. Zusätzlich wird das Pairing-EMM mit der Länge 119 (0x77) geblockt, welches Sky bei mehrfacher manueller Anforderung der Aktivierung über das Kundenportal an die entsprechende Karte schickt.
Damit sollten nun Karten-Erstaktivierungen sowie Sky Select PPV Aktivierungen wieder funktionieren.



Die wichtigsten Emu-Provider:
Most important emu-provider:

- ORF Digital (19.2°E)
- AustriaSat / MTV (19.2°E)
- TNTSAT (19.2°E)
- SRG SSR (13.0°E)
- Digitürk (7.0°E)
- Digitürk (42.0°E)
- Skylink (23.5°E)
- Cablecom Swiss
- Teleclub (DVB-C Swiss)
- Mezzo/MCM Belgique (13.0°E, 5.0°W)
- Bulsatcom (39.0°E)
- UPC Direct (0,8°W)
- Ant-1 Europe (9°E)
- Digea Greece (3,1°E)

Changelog:


•Problem mit Auto PMT behoben, welches nicht mehr richtig funktionierte und zu langen Schaltverzögerung führte
fixed a bug when AutoPMT was enabled not allowing anymore to get a valid PMT
•Problem beim Lesen der Berechtigungen bei *** Smartkarten behoben
fixed the reading of entitlements on *** smartcards
•Problembei der Zuordnung zwischen der tier ID und dem Paketnamen(***, Cryptoworks, Irdeto usw.) im Menü behoben
fixed the association between chid/tiers (***, cryptoworks, irdeto and so on) and packages on entitlements menu
•Warnmeldung bei der Einstellung von Auto PMT und den EMM Blockern hinzugefügt, um Fehleinstellungen zu vermeiden.
added warning messages when enabling autopmt and blockers for EMMs to prevent users doing the wrong thing
•Neue Sky DE EMM-Filterregeln via modbox Datei aktualisierbar



Special stuff:

- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- AU (Auto-Update) for TNT SAT SurEncryption key
- 8X MTD
- *** FastMode+ to further improve MTD performance
- Sky DE V13/V14 pairing prevention mechanism

Pacific 4.30 Unicam Evo/Twin 4.0/3.0 (mit Upgrade auf 4.x)

Special stuff:

- HD+ HD03/HD03a smartcards support
- TNTsat smartcards reading support for HD channels
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- AU (Auto-Update) for TNT SAT SurEncryption key
- 8X MTD
- *** FastMode+ to further improve MTD performance

Troja 4.30 Unicam Evo/Twin 4.0/3.0 (mit Upgrade auf 4.x)

Special stuff:

- HD+ HD03/HD03a smartcards support
- TNTsat smartcards reading support for HD channels
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Fransat smartcards reading support
- AU (Auto-Update) for TNT SAT SurEncryption key
- 8X MTD
- *** FastMode+ to further improve MTD performance