Final B8hxFFh CSA-RBT v2 table is online

Messages
44
The final B8hxFFh CSA-RBT v2 table is online now.

You can find the mega.nz linklist for the zipped table here:
http://colibri-dvb.info/ -> CSA-Rainbow-Table

I have tested the success rate with 1000 crypt8 values (generated via random list number 1).
Success rate: 84.2% (842/1000 found)

I have used PowerArchiver 2013 to compress the files. It seems other unzip tools are showing an error message
after the unzip, but the unzipped files may be still correct. So after verifying the MD5 checksums of the zipped
files you should also verify the MD5 checksums of the unzipped RBT2 files that I have included additionally at
the end of the file. You can also use the PowerArchiver 2013 or newer version to unzip the files then no error
message after the unzip will be shown if the input files are vaild.

As I have seen with my other mega.nz links you will likely get a message that some links temporary offline
(instead of permanently offline). As it turned out they were online after a few days again. So just try again later.
 

FaDeL®

Staff member
Super Moderator
Messages
7,350
Do I need to download all the tables !!
or Is it possible to download one of them on the table to get 84%؟؟
 

tarcito

Registered
Messages
152

sideswiper

Registered
Messages
50
What rar program are you using to extract the files ?
Buy a copy of PowerArchiver 2016 it seems to work a lot better than Winrar as i too was getting errors when trying to extract files
 

tarcito

Registered
Messages
152
I 'm using a 2015 version crakeada.

is it not a problem in the file?
someone could share it with me please .
 

tarcito

Registered
Messages
152
bad file

´
GOOD MORNING. friend I 'm not getting unpack Part of Chain 5. every time I try to unpack be charging that the zip file is corrupted 16
CSA_B8hx00h_1000h_55999998h_6AFFFFFDh.z16 https://mega.nz/#!qY00zLQY!nBOzWZAD22nS1LyW6EUjT1ZTpbodpan0H0_Z9jF_jdM


I have downloaded this file twice , but whenever I try to decompress is accused that the file is corrupted . What

the file that is bad this is

CSA_B8hx00h_1000h_55999998h_6AFFFFFDh.z16 https://mega.nz/#!qY00zLQY!nBOzWZAD22nS1LyW6EUjT1ZTpbodpan0H0_Z9jF_jdM
 

tarcito

Registered
Messages
152
friends I'm unable to find the crypt8 . recording was 10 minutes, then raised to 22 minutes as well continues with this problem. I got to record 35 minutes and unfortunately the file does not appear. someone could help ; please.
 

serkanguzel

Registered
Messages
1,442
Hi all,

Do have that, Colibri's V2 RBTs merged ?

If there is do that, how did do ?

Example : these group, pieced RBT files ;

CSA_B8hxFFh_1000h_00000000h_15666665h
CSA_B8hxFFh_1000h_15666666h_2ACCCCCBh
CSA_B8hxFFh_1000h_2ACCCCCCh_40333331h
CSA_B8hxFFh_1000h_40333332h_55999997h
CSA_B8hxFFh_1000h_55999998h_6AFFFFFDh
CSA_B8hxFFh_1000h_6AFFFFFEh_80666663h
CSA_B8hxFFh_1000h_80666664h_95CCCCC9h
CSA_B8hxFFh_1000h_95CCCCCAh_AB33332Fh
CSA_B8hxFFh_1000h_AB333330h_C0999995h
CSA_B8hxFFh_1000h_C0999996h_D5FFFFFBh
CSA_B8hxFFh_1000h_D5FFFFFCh_EB666661h
CSA_B8hxFFh_1000h_EB666662h_FFFFFFFFh



Thank you in advance for answers.
 
Last edited:

olalacuy

Registered
Messages
15
I have problem with CSA_B8hx030000h_1000h_EB666662h_FFFFFFFFh.z05 https://mega.nz/#!Fo0GAYLT!Ik6f9Z66Ku9xDeBMevGWisQgrziVOWG6lb3-u0itA9s

I downloaded several times but always show me corrupt or bad file when I try to extract. With all other files is everything ok. Please help and reupload the file. Thanks.

If you are unable to unzip a table you can verify the MD5 checksum of the files

e625bbd16fd14b39cfecef487291d294 CSA_B8hx030000h_1000h_EB666662h_FFFFFFFFh.z05
 

bissmaster

Registered
Messages
19
i have downloaded all B8hxFFh V2 Tables from colibris site and have unpacked them. Now i have 12 folders with all rbt2 chain files on my HDD. But now i have a problem to merge all of the tables into one 1.25TB table file.
First i created a new name, then i clicked on "Add job" and "Add to rainbow table", there i added all 12 folders into the "chain dirs" window and selected the name of my created map. Then i created an empty folder for scratching, but when i click the "Start" button, after 2 seconds a message in the "info" window appears: "waiting for new chains" and nothing happens (in colibris tutorial is written: "it can takes a long time...")
What can i do ?
 
Last edited:

bissmaster

Registered
Messages
19
problem solved:
what i has written, was already ok. It tooks really only 2 seconds to merge all 12 Tables into the new one created 1.25TB table. I have already successfully done some searching CWs ! :)
 

flysat

Registered
Messages
184
B8hxFFh V2

Hello dear people

At the end of December 2018 I finished the job With the three tables of RBT V1 B8hxFFh B8hx00h B8hx030000 I made each table separately 220 GB Using many RBC files Into the RBT folder

Unfortunately for the year 2019 I had a severe car accident
I was in a hospital for 6 months And today I'm trying to get back to normal

I want to build a first table B8hxFFh Version 2
And at the beginning of work Download first 19 files
With extension z0 Of all the 217 links : http://colibri.bplaced.net/linklist_v2_B8hxFFh.txt
To see how I get on with it

Can you please explain to me step by step What should I do
To construct the B8hxFFh table Because working with V2 tables
It is quite different from V1 tables







 
Top