Explanations:!: to avoid problems during an update protocol

marokino08

Super VIP
Messages
7,462
explanations:!: to avoid problems during an update protocol
l smart card should be as independent as possible.
something which was not the case but before the present.
it is designed to avoid problems for updated maps.
surtous when the card almost full and it takes more power
to the reader.what will happen very soon given the next update.
bug fixes are necessary before moving towards d other systems.
for update please follow this procedure have a late
update optimal card magic.

1 before the update reset the options or gBox keyfly in your
and not smartcard demo
2 After the update plug your decoder on your tv

3 inséret your card in your magic decoder

4 going to change the smart card options

the decoder detects the card and days but the sv and kv

and no more problem with this solution​



 

hafsat

Registered
Messages
249
Good day to all. Please can some one help me my Echolink 3020ir plus can NOT UPGRADE, i try for several times still, its only show in the Loader AliMup55( Get client protocal version & chuck ) then also its read No parkect receive.
Please king Marokino08 help me out.
thanks
 

Bawasani

Registered
Messages
320
pls any body can advise me how to update cas data of e3020 plus

Hi,
There is a loader which usually come with the casdata software that allow you to upgrade.But you only upgrade not on the main code but on casdata unless there is instructions that you upgrade to main code otherwise you will kill your receiver. Refer to previous casdata soft and you will see the loader.
 

mohammed tanko

Super VIP
Messages
4,862
Good day to all. Please can some one help me my Echolink 3020ir plus can NOT UPGRADE, i try for several times still, its only show in the Loader AliMup55( Get client protocal version & chuck ) then also its read No parkect receive.
Please king Marokino08 help me out.
thanks

THIS MEANS COMPORT IS NOT CONFIGURED CORRECTLY. GO TO DEVICE MANAGER ON YOUR COMPUTER, CHECK IN WHICH COMPORT IS THE USB-SERIAL IS SITUATED. IF IT IS CONFIGURED IN COM 1 THEN YOUR LOADER (ALIMUP55) MUST BE AT COMPORT 1, i.e 1-1, 2-2, 3-3 and so on!
 
Top