Latest madVR Codec Pack

REBELLE

Registered
Messages
881
Latest version: 0.82.4 (07 Mar 2012)
System requirements:Windows 2000/XP/2003/Vista/7

What's new in this version:
Code:
- added: new option to activate deinterlacing if in doubt whether it's needed
- added: new IVTC option to only look at pixels in the frame center
- added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
- deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
- improved IVTC cadence logic
- improved DXVA deinterlacing behaviour slightly
- improved display mode change event handling
- improved exclusive -> windowed switch a little bit more
- fixed: madVR sometimes didn't notice changed display mode
- fixed: if DXVA2 deinterlacing was not available in XP, it made madVR crash
- fixed: crash when moving madVR to another display with ZoomPlayer
- fixed: freeze when switching subtitles in paused state
- fixed: closing down madVR didn't always wait for the closing to complete
- fixed: closing the media player while madVR was in exclusive mode -> freeze
- fixed: sometimes asking for a freeze report created multiple reports at once
- fixed: MS DVD Navigator caused error in the primaries/matrix auto detection
- fixed: when switching from Bicubic to SoftCubic, options weren't updated
- fixed: red error messages were supposed to disappear after a while but didn't
- fixed: red error messages no longer show duplicate error messages
- fixed: a couple of crashes and freezes
 

REBELLE

Registered
Messages
881
Latest version: 0.82.5 (11 Mar 2012)

System requirements: Windows 2000/XP/2003/Vista/7

What's new in this version:
Code:
- added new option to activate deinterlacing if in doubt whether it's needed
- added new IVTC option to only look at pixels in the frame center
- added IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
- deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
- improved IVTC cadence logic
- improved DXVA deinterlacing behaviour slightly
- improved display mode change event handling
- improved exclusive -> windowed switch a little bit more
- lots of fixes
 

rama11

Feed Hunter
Messages
16,323
Latest version:
0.87.12 (January 04, 2015)

Version history / Release notes / Changelog:
madVR v0.87.12

* fixed: v0.87.11 broke madTPG API compatability
* madTPG: added dropdown box to allow manual gamut/3dlut selection
* madTPG: loading a 3dlut now takes immediate effect in madTPG
* madTPG: added API "GetVersion"
* madTPG: added API "Get/SetSelected3dlut"
* madTPG: number of pre-presented frames is now limited to max 3
 

mohammed tanko

Super VIP
Messages
4,862
madVR 0.90.3

Changelog:

v0.90.3 (2016-01-18):

  • frame packed 3D: display mode is now always changed to 1080p23
  • frame packed 3D: smooth motion FRC is now always off
  • 3D: side-by-side quality is improved (proper scaling instead of Bilinear)
  • 3D: added top-and-bottom, line alternative and column alternative modes
  • 3D: added "swap left / right eye" option
  • profile rules: added "3D" boolean variable
  • profile rules: added "+", "-", "*", "/", ":" math support
  • profile rules: number fields can now be used on both equation sides
 

mohammed tanko

Super VIP
Messages
4,862
madVR 0.90.20

Changelog: madVR v0.90.20

  • tweaked deringing algorithm some more
  • added workaround for weird crash with latest AMD beta drivers
 

mohammed tanko

Super VIP
Messages
4,862
madVR v0.90.23


  • updated AdaptiveSharpen to version 2016-07-10
  • custom output levels can now be adjusted in 0.25 steps
  • HDR: added option to define how to handle too bright & saturated pixels
  • fixed: HDR luminance measurements + chroma SuperRes produced green screen
  • fixed: #420: chroma was doubled despite being below scaling factor threshold
Code:
http://downloads.ziddu.com/download/25447025/madVR.zip.html
 

ARA$H

Banned
Messages
1,081
v0.91.3:
* fixed: NNEDI3 doubling could crash in certain situations
* fixed: NGU chroma upscaling didn't allow "veryHigh"
* fixed: SuperRes strength controls were disabled for chroma upscaling

http://madshi.net/madVR.zip
 

mohammed tanko

Super VIP
Messages
4,862
madVR v0.91.4

Code:
redesigned "image upscaling" settings page once more
super-xbr image doubling is available again
 

ARA$H

Banned
Messages
1,081
v0.91.6:
* added NGU Anti-Alias algorithm, intended as a potential NNEDI3 replacement
* completely redesigned image upscaling settings page once more
* downscaling after doubling now uses relaxed AR (instead of strict)
* increased AdaptiveSharpen + LumaSharpen upper limits
* fixed: up & downscaling anti-ringing checkbox was sometimes disabled
* fixed: 3D subtitle depth was incorrect for movies with swapped eyes
 
Last edited by a moderator:

ARA$H

Banned
Messages
1,081
v0.91.8:
* NGU Sharp now targets middle ground between gamma and linear light
* added NGU Standard + Soft algorithms, with direct quadrupling support
* added true "very high" quality mode for direct quadrupling
* modified "add grain" to produce similar output when using direct quad
* fixed: Y416 input was handled incorrectly

http://madshi.net/madVR.zip
 

ARA$H

Banned
Messages
1,081
v0.91.8:
* NGU Sharp now targets middle ground between gamma and linear light
* added NGU Standard + Soft algorithms, with direct quadrupling support
* added true "very high" quality mode for direct quadrupling
* modified "add grain" to produce similar output when using direct quad
* fixed: Y416 input was handled incorrectly

http://madshi.net/madVR.zip
 

ARA$H

Banned
Messages
1,081
v0.91.9:
* added support for sending HDR metadata via Nvidia's private API
* added support for sending HDR metadata via win10 (not tested yet)
* fixed: processing (not converting) HDR was not handling gamut correctly
 
Last edited by a moderator:

ARA$H

Banned
Messages
1,081
v0.91.10:
* improved Windows 10 HDR metadata support
* added new option "hack Direct3D to make 24.000Hz and 60.000Hz work"
* performance improvement with "trust DXVA" + "use D3D11 for presentation"
* fixed: Intel GPU driver flickering bug with "use D3D11 for presentation"
* fixed: madVR(64).ax files were larger than necessary
* Intel: 10bit DXVA surfaces are now converted to 10bit RGB (instead of 8bit)

http://madshi.net/madVR.zip
 

ARA$H

Banned
Messages
1,081
v0.91.11:
* fixed: HDR metadata via Nvidia's private API was broken in 64bit
* added workaround for driver bug in Nvidia's private HDR API
* improved Windows 10 HDR metadata support
* D3D11 windowed mode now supports 10bit, if "HDR and Advanced Color" is on
* improved AMD native 10bit DXVA decoding; drivers are still broken, though
* downscaling after doubling now uses relaxed AR only for NGU Sharp + Standard

http://madshi.net/madVR.zip
 

ARA$H

Banned
Messages
1,081
v0.92.1:
* fixed: depending on madVR settings, v0.92.0 crashed right at initialization
* fixed: "display modes" were listed twice in the settings dialog
* added new "display modes" -> "custom modes" settings tab
* added support for native D3D11 DXVA hardware decoding (needs nightly LAV)
* added support for outputting 10bit in fullscreen windowed mode (win10)
* added optimized "let madVR decide" HDR configuration option
* added support for AMD's private HDR switching API
* added workaround for make Nvidia's private HDR switching API work better
* added full-size EDID block reading (256 bytes instead of just 128)
* added extended EDID parsing
* improved frame drop/repeat estimates for xx/1.001 hz modes
* fixed: deinterlacing of P010 software decoded videos was broken



http://madshi.net/madVR.zip
 

ARA$H

Banned
Messages
1,081
v0.92.2:
* fixed: possible crash when stopping playback or freeing the madVR instance
* fixed: DXVA2 decoding+downscaling produced wrong colors with HDR content
* fixed: D3D11 DXVA decoding: crash when moving window to another monitor
* fixed: D3D11 DXVA decoding: green screen with DX10 GPUs
* fixed: D3D11 DXVA decoding: problems if video unexpectedly changes size
* fixed: D3D11 DXVA decoding: detection for bad HDR metadata wasn't working
* fixed: custom modes tab didn't show for AVR devices
* fixed: custom modes tab didn't show when display modes was in a profile
* fixed: D3D11 FSE mode was sometimes limited to 8bit instead of 10bit
* fixed: HDR "let madVR decide" setting misbehaved for Intel GPUs
* fixed: HDR metadata sent to display wasn't always correct
* fixed: "HDR" profile bool was not set if HDR metadata was bad/unknown
* fixed: some settings windows appeared behind a "always on top" media player
* added support for sending MaxCLL/FALL HDR metadata (if available) to the TV
* added "enable nvidia 3d.reg" to enable 3D playback with newer Nvidia drivers
* if video HDR metadata is bad/missing, default HDR metadata is sent to TV now
* when custom mode is deleted, measurements are now also deleted
* Nvidia "try custom mode" timeout increased to 30 seconds

http://madshi.net/madVR.zip
 

ARA$H

Banned
Messages
1,081
v0.92.4:
* fixed: HDR metadata transport didn't always work with AMD GPUs
* fixed: potential crash issue introduced in v0.92.0
* fixed: possible rendering slowdown issue introduced in v0.92.2
* fixed: custom mode warning windows sometimes appeared in background
* added logging to help find why custom mode measurements aren't recorded
* screenshotting now uses NGU High instead of Very High
* screenshotting now has a 5 second timeout instead of 2 seconds
* slightly modified user interface for Nvidia custom mode creation
http://madshi.net/madVR.zip
 

mohammed tanko

Super VIP
Messages
4,862
v0.92.7 (2017-10-15):
added experimental deblock option "don't reduce texture detail"
added experimental AdaptiveSharpen option "linear light"
added new lowest "reduce compression artifacts" strength
revisited "reduce random noise" strength levels, now from 1-12
updated AdaptiveSharpen to latest igv version
http://madshi.net/madVR.zip
 

ARA$H

Banned
Messages
1,081
v0.92.10
* algo "remove compression artifacts" can now be run as part of NGU
* reverted NGU Sharp back to gamma light -> slightly better anti-aliasing
* removed NNEDI3 (based on user feedback)
* ever so slightly improved HDR behaviour
* default value for HDR -> SDR conversion is now set to "200 nits"
* default value for "enable automatic fullscreen exclusive mode" is now "off"
* default value for "use d3d11 for presentation" is now "on"
* fixed: using multiple madVR instances at the same time could sometimes fail

http://madshi.net/madVR.zip
 
Top