Latest - TSReader

Status
Not open for further replies.

TheHighLander

Super VIP
Messages
4,144
TSReader
(Full version, 2.8.47c)

New Link
Code:
http://www.mediafire.com/file/2xfjm4c7tiqtlhi/TSReader.2.8.47c.rar
 

tani1

Staff member
Super Moderator
Messages
17,767
TSReader Lite 2.8.48a

Version 2.8 build 48a:
Known issues
Captions from H.264 streams are not saved correctly in archive mode
Captions carried in SCTE-20 format and written in the archive mode will sometimes be jibberish
The HTTP source runs at the rate the server will dole out data and not at the mux speed
Changed in 2.8, build 48a:
All: Added support for the Blonder Tongue MTSA device. This supports 8VSB, QAM-B, ASI and SMPTE-310M inputs and ASI & SMPTE-310M output in TSReader Pro
All: Display of the SDT version number
All: Fixed the Sencore/Dektec DTU-236 source module to correctly detect front-end lock and switch cleanly between RF & ASI inputs
All: Fixed missed DiSEqC commands on some TBS DVB-S/S2 satellite cards
Pro: Added the ability to record 10 second files in the archive function.
All: Updated to Alitronika's latest API
Pro: Fixed an issue with exporting CUE messages to XML
All: Added decoding of the resolution of H.265 video streams
All: Added chroma and luma bit depth for H.265 video. Anything above 9 bits is considered HDR
All: Added support for the TBS 5927 tuner
All: Fixed an issue where right clicking a DVB NIT and selecting "Tune to this mux" would fail on TBS DVB-S2 cards
Std/Pro: Fixed an issue with the -I switch not working on DSS muxes and dropping source module parameters
All: Improved the reliability of the H.264 thumbnail decoder
Std/Pro: Fixed a crash on XML export when hundreds of programs are defined in the PAT
All: Added support for SAT>IP tuners
 

tani1

Staff member
Super Moderator
Messages
17,767
TSReader Lite 2.8.48b

Known issues

  • Captions from H.264 streams are not saved correctly in archive mode
  • Captions carried in SCTE-20 format and written in the archive mode will sometimes be jibberish

Changed in 2.8, build 48b:
  • All: The easy reader and widescreen flags in the ATSC caption descriptor are now displayed
  • Std/Pro: Fixed an issue with XML and XMLTV export where the wrong options were displayed when choosing the output file
  • Std/Pro: The SAT>IP source module now supports the tuner address and number on the command line in the format [tuner-address:tuner-number]
  • Std/Pro: Added the DVB EPG category to XMLTV exports
  • All: The HTTP source module now understands .m3u files without the need for them to be described by an HTML 5 <video> tag.
  • All: HLS/MPEG-DASH live streams are now supported by the HTTP source module
  • Pro: The ccextract command-line utility now processes captions from H.264 video
  • Pro: XML export now includes SCTE 35 cue messages in raw hex format
  • Pro: The Stream Monitor window is now bigger so the entire alarm text gets displayed
  • Pro: Added a button to copy all the Stream Monitor alarm text to the clipboard
  • Pro: Added a function to the Stream Monitor to generate an alarm if a certain PID's bitrate drops below a certain level. This level can be set by clicking the Settings button in the Stream Monitor window
  • Std/Pro: Added the ability to save MPE IP data not carrying UDP or TCP traffic
  • Pro: Added the ability to log all SCTE-35 messages into a comma separated file

  • Pro: Fixed an issue where H.264 captions would sometimes be gibberish if B slices were present - fix applies to both TSReader and the ccextract command-line program
 

tani1

Staff member
Super Moderator
Messages
17,767
TSReader Version 2.8.49

Changed in 2.8, build 49:

  • All: Added source modules for the TBS 6902 DVB-S/S2 card
  • Pro: Fixed a problem with SCTE-35 messages getting corrupted on networks with a weak and noisy signal.
  • Pro: Added a network-wide monitoring program called TSWatcher. More details can be found here
  • Std/Pro: Added an option to the -R switch (-Rt) to tell TSReader to split files in the number of seconds specified rather than the number of MB
  • Pro: TSWatcher: Added support for monitoring DVB System Information PID rates
  • Pro: TSWatcher: Added support for importing DVB-T/T2 and 8VSB multiplex lists
  • Pro: TSWatcher: Added option to write alarms to a plain text file in the TSReader/TSWatcherLogs folder
  • Pro: TSWatcher: Added alarm for a particular PID falling below a specified data rate
  • Pro: TSWatcher: All alarm values can now be changed
  • Pro: Added a forwarder module for TCP
  • Std/Pro: An H.265 thumbnail decoder is now included with TSReader
  • Pro: Added display of closed captions carried in H.265 video
  • Pro: ccextract program also supports H.265 video
  • All: UDP/RTP/HRTP source modules now show the source address of the stream
  • All: Added support for SAT>IP DVB-C interfaces
  • Pro: TSWatcher: Add alarm for checking the presence of listed PIDs
  • Pro: Updated the ITW-9500 (DVB-T modulator) forwarder module to support more than one of these modulators at a time using different TSReader Profiles
  • Pro: Added the ability to ignore SCTE-35 NULL CUE messages. This is toggled by right-clicking on any CUE elementary stream in the tree view. This does not affect logging of CUE messages - just their display
  • All: Added support for Silicon Dust HDHomeRun ISDB-Tb models
  • Pro: Changed the behavior of the Control Server's FORWARD ON command so that if a forwarder module has a setup dialog, this dialog is not displayed. This means before using this command, the forwarder must be run manually to set the parameters
  • Pro: Updated the ITW-9500 code to use the latest manufacturer API
  • Pro: Adds logging support for the upcoming TSBitCounter program
  • Pro: Added LOG command to the control server. Sub-commands are TSBitCounter or SCTE35. TSBitCounter is then followed by either ON or OFF and SCTE35 is followed by either the filename to log to or OFF to disable
  • Pro: Added support for the ITW-9517 low-cost ISDB-T modulator
  • All: Added support for SMPTE 2022-4 to the RTP source modules. TSReader does not process any FEC included but it does handle the extra SMPTE 2022-4 data added to the MPEG-2 payload part of the RTP packets. If the sender is using the SMPTE 2022-4 packet counter mode, TSReader will re-generate the NULL packets discarded by the sender
  • Pro: RTP and RTP with SMPTE 2022-4 modes added to the UDP mux forwarder
  • All: Depreciated the D-VHS, Roku HD-1000 and XNS playback modules. These technologies and devices are all obsolete
  • Lite: TSReader's window is now resizable
  • Std: The thumbnail processor now runs multiple streams in parallel - this will make thumbnail decoding much faster on multiple program transport streams
  • Pro: A one time per profile warning is now shown if the parallel thumbnail thread count is lower than recommended and can automatically fix this. Like the Standard version this speeds up thumbnail generation but is even faster in Pro
 

tani1

Staff member
Super Moderator
Messages
17,767
TSReader Lite Version 2.8.51


  • Version 2.8, build 51:

  • All: The Alitronika ASI source module now supports the AT4R1 ASI to USB adapter
  • All: The HDHomeRun DVB-T source module now works correctly with DVB-T2 signals without reporting a false failure to lock
  • All: Recording and playing streams with E-AC3 audio now correctly records the audio stream
  • Std/Pro: Improvements to the H.265 decoder. Interlaced video is now decoded correctly
  • Std/Pro: Fixed an issue when exporting to XML where a long rating string in an EIT event could corrupt the event's start date
  • All: H.264 and H.265 decoders now display a "Wait..." thumbnail before the thumbnail is decoded. MPEG-2 video decodes very rapidly but H.264 and especially H.265 with a 4K picture can take a second or more to get a thumbnail. This makes it much clearer that TSReader is working on it
  • All: The YUV to RGB conversion required to get a thumbnail on MPEG-4, H.264 and H.265 video is significantly faster
  • Pro: Fixed an issue with CEA-708 caption service numbers greater than six
  • All: DVB NIT entries in the tree-view now display the network name if transmitted
  • All: The DVB NIT maximum multiplexes was 2,048. This has now been increased to 8,192 to handle some European DVB-C networks
  • All: Added support for the ASI input port on the Alitronika AT-290 DVB-S modulator
  • Std/Pro: Added the ability to view the MPEG-2 start codes or the H.264/H.265 NALU codes. This can be very useful for finding strange problems in video streams especially when some NALU codes are missing
  • All: Added option to right-click a "Decoder Disabled" thumbnail in order to enable that decoder
  • Std/Pro: Right clicking a video thumbnail now displays menu options to allow quicker access to decoder settings, offers to refresh thumbnails and allows the thumbnail size to be changed
  • Std/Pro: Changing the thumbnail size now refreshes the thumbnails
  • All: Alitronika input ASI devices that use DvsStation V4 are now supported using the AlitronikaASI_v4 source-module
  • All: Added support for the TBS 690A four-port ASI input card
  • Pro: Cleaned up the caption decoder messages and made the caption display easier to read by adding some color
  • All: Some DVB-T NIT entries carry terrestrial system delivery decoder that's all ones (which means reserved). This was incorrectly shown as -0.0MHz
  • Std/Pro: The RTP and HRTP source modules now count the number of RTP packets lost at the IP level
  • Pro: The RTP and HRTP source modules can now log the RTP packet loss to a comma-separated file
  • Pro: TSWatcher: Added the ability to include thumbnails in the alarm report
  • Pro: TSWatcher: Added a new function to generate a standalone webpage containing thumbnails from all multiplexes being monitored
  • All: Fixed an issue where service names on DCII muxes would sometimes be blank
  • All: Depreciated support for Dish Network switches and changed the code to support DiSEqC 1.1 switches instead which support up-to 16 satellite inputs
  • All: Updated links to reference the new tsreader.com website
  • Std/Pro: Removed documentation from the installer. TSReader documentation is all on-line now
  • Lite: Video resolution is now exported to HTML for H.264 video
 

ViaHussun

Donating Member
Messages
4,097
TSReader Lite 2.8.53
https://www.videohelp.com/download-nJFspKgmJPv/TSReaderLite2.8.53.exe

Code:
Version 2.8, build 53 ;

All : Added support for the following TBS products: 5301 (HDMI to H.264 encoder), 6290SE (2xDVB-T/T2/C), 6301 (HDMI to H.264 encoder), 6304 (4xHDMI to H.264 encoder), and 6909 (8xDVB-S/S2)
Std/Pro : Added support for Media Highway 2 format EPG. This is enabled with the -EM switch
All : Fixed an issue with the aspect ratio and frame rate for H.264 video when a sequence scaling matrix was present
All : Increased the size of the description column in the stream selection dialog used for HRTP, RTP, TCP and UDP protocols
All : Added support for the TBS 5590 USB probe. This device supports DVB-ASI, DVB-S/S2/S2X, DVB-T2/T2, DVB-C2/C2, ISDB-T and QAM-B
Std/Pro : Added an option to XMLTV export that allows selection between channels and EPG events mixed together (the format supported by TSReader for many years) and channels first, followed by programs. Additionally added an option to the the -X+nn switch to allow selection between these modes
Pro : Added an option to TSWatcher to log the exchange with SMTP email servers. This can be useful in debugging email sending issues
All : Added a source module for SAT>IP DVB-T servers
Pro : Fixed a problem in TSWatcher where the wrong command line would be set when importing 8VSB and QAM-B channel lists with channel descriptions
Pro : Fixed an issue with Korean closed-captions containing multiple user-data streams with the 0x64088408 prefix
Std/Pro : Fixed an issue with the multicast UDP, RTP and HRTP sources where source specific streams using IGMPv3 via the the command-line would return an erroneous error message
Pro : Added a new switch -9 to both TSReader and TSWatcher to allow multiple UDP Multicast lists

TSReader Lite 2.8.53 crack :)
https://mega.nz/#!eY5TULoL!Dx38X_qEtj38mTxdgeu1biXGE1JXdSNFntwztnP9HHE

Big thanks ElitEND
Turkish hacker ;)
 
Status
Not open for further replies.
Top