Unofficial Openpli 7.0 AZbox test images

aitchala

VIP
Messages
1,394
Hi all :)

Unofficial Openpli 7.0 AZbox test images::

4097-0-1-0-0-0-0-0-0-0-20130308115441-1.jpg


AZboxHD:
Code:
http://www.mediafire.com/file/w8sx6fxm38fcb3f/openpli-enigma2-homebuild-azboxhd_azup.zip/file

AZboxme:
Code:
http://www.mediafire.com/file/xs6skvbd3datsdw/openpli-enigma2-homebuild-azboxme_webif.zip/file

Code:
http://www.mediafire.com/file/b25349n3939i7v5/openpli-enigma2-homebuild-azboxme_usb.zip/file

AZboxminime:
Code:
http://www.mediafire.com/file/i6efggs066sfo56/openpli-enigma2-homebuild-azboxminime_webif.zip/file

Code:
http://www.mediafire.com/file/jdxpvq5j2c67c43/openpli-enigma2-homebuild-azboxminime_usb.zip/file
 

Tritus

Registered
Messages
19
Tested!, really fast.... we hope and wait for improvements...

found difficulties in installing wifi drivers, which are not inside, as problem to install multiboot for Pli images... also curl impossible to install... curl is needed for several plugins...

Radios work fine... size is larger, so larger dom is also needed

As first, good job mate!

Thank you
 

aitchala

VIP
Messages
1,394
Tested!, really fast.... we hope and wait for improvements...

found difficulties in installing wifi drivers, which are not inside, as problem to install multiboot for Pli images... also curl impossible to install... curl is needed for several plugins...

Radios work fine... size is larger, so larger dom is also needed

As first, good job mate!

Thank you
thanks mate for test , i will check them again and fix it
 

aitchala

VIP
Messages
1,394
Unofficial Openpli 7.0 AZbox images

Hi,
Unofficial Openpli 7.0 AZbox images

Upgrade Gstreamer to 1.15.0.1
Update some pythons
Update enigma2

aaaa.jpg

bbbb.jpg


AZboxHD:

Code:
https://mega.nz/#!c0VxzYxI!IQytPan0JY5U4VsDAhxGOeVAWKFLhyPzr7lH-r2cvNM

AZboxme:

Code:
https://mega.nz/#!xxND2QTa!LJyR1OnzhVlrtoUk-qz-Xe_01NiXmafTfg1wRzlp7ms
Code:
https://mega.nz/#!otExASbS!F0YzVdHhh5UU43F7VD-Bx4q7J0f9inb695E0W8StDak

AZboxminime:

Code:
https://mega.nz/#!wsN3mKLC!FQouioT3pXZnNgKg2TkUMVS_lOYWjaup6xcuiy0LTeU
Code:
https://mega.nz/#!MhcRHYYK!vxbitdyC08oi6KNAwT0BqA6p1DK2Ia33HuEfXzTsLsk
 

Tritus

Registered
Messages
19
I really feel happy as I like OpenPli enigma2 base, thank you... I see you switched from kernel 3.3.1 to 3.9.2, are there special technical reasons?
 
Last edited:

aitchala

VIP
Messages
1,394
I really feel happy as I like OpenPli enigma2 base, thank you... I see you switched from kernel 3.3.1 to 3.9.2, are there special technical reasons?

Only AZBox me/minime used kernel 3.9.2 , I'm currently working on AzboxHD i will add kernel 3.9.2.. On kernel 3.3.1 work fine..thanks
 

Tritus

Registered
Messages
19
Are these images related to the openvision.tech ones?

I notice they also have build for AzboxHD, v7.0 r3
The size of the e2 file is much smaller, so I guess that the openvision image can be used for a normal size DOM.
Direct download link: http://www.mediafire.com/file/1p3lp...-enigma2-develop-7.0-r3-azboxhd_azup.zip/file
Link to the openvision forum (needs registation)
https://openvision.tech/viewtopic.php?f=6&t=27

sincerely I supposed so... anyway, ref. to AZbox Premium, OpenVision is already based on kernel 3.9.2., OPenPli 7, as we can read, is based on kernel 3.3.1 (except Me/MiniMe)
 

fedesamp

Registered
Messages
3
Congratulations for the job!
Unfortunately I point out that the on azbox premium + the dvbt does not detect any channel even if the signal is present.
I hope for a tip to make the dvbt work.
Thank you
 

Tritus

Registered
Messages
19
Congratulations for the job!
Unfortunately I point out that the on azbox premium + the dvbt does not detect any channel even if the signal is present.
I hope for a tip to make the dvbt work.
Thank you

...really strange, with first release I tuned more dvbt channels than OpenATV... maybe you could at first upload a precompiled channel settings and then try to tune manually...
 

fedesamp

Registered
Messages
3
Probably nothing is loaded automatically: for example, if you record a file on the satellite at the same time, the terrestrial channels become visible, but when the recording ends, the signal disappears.
This happens to me with this dìfirmware and also with others (HMDU, openvision) instead it works perfectly with openpli 6 and with openatv.

Thank you
 
Last edited:

estasmeaver

Registered
Messages
2
Hi,
After recovery my azbox hd premium+, with yamon, i search a stable E2 firmware. I have a friend with openpli and i like the image.
My azbox has the 344 kernel, for yamon i had to use it for complete the process. Now i d´ont know if all firmwares working? i can use a firmware with old kernel?
If somebody can help me i will appreciate.
Thanks
 

Tritus

Registered
Messages
19
Hi, can I use MAT 2.4.2 to upload the image on Azbox Premium +?

Thanks a lot

I prefer AZup for larger DOM, anyway I also use MAT2.4.4.1 with it you can additional decide partition numbers and sizes...

Ciao
 
Top