The Last Drakkar - public beta version

The fact that tomorrow we have the International Children's Day, The Flying Dutchman Team decided to publish his new program "The Last Drakkar".

This project started in March 2012. We worked every day after work, during work, at night and in the weekends, we have devoted a lot of time invested , buy all sorts of electronics, card readers, tuners, subscriptions etc.

Everything is done to make the appropriate tests.

The program supports coding systems as:

Seca
Conax
Viaccess
Irdeto
Cryptoworks
Nagra
DGCrypt



This is the first stage of the project, Beta version!
When using the program you find any irregularities, errors or have any ideas to improve the work program to be more user friendly, please write here in this topic or to e-mail - [email protected]
Private mail or my PM is for private/no public things.
If there are no errors are found, then in July will be released the official version, not beta.

...DOWNLOAD...



The Flying Dutchman Team is not responsible for any damage using the program !
The tool is completely legal !
It has no features to break any of the coding systems !

small manual:


Window:

- Read
read info from the card's
- Extra Info
it depend of system , more info from the card's
- Send
manual send cmd's , direct send etc
- Calc
many calculator's hex/dec/bin/date/xor/atr etc etc
- RSA calc
rsa calculator
- EMM/ECM
info about emm/ecm
- PreToPost
converting emm/ecm from pre cam to post cam
- Invert
inverting data , cleaning etc
- Bombing
send random or not emm/ecm to card's
- Bin to Txt
converting emm/ecm from bin file to txt with different header, sorting by header or UA/SA, deduplication , search in file , copy in pre cam & post cam format
- Brute Force
play with cmd's
- Loger
based on dvbsnoop , for logging emm/ecm
- LogerHardware
for logging comunication
- PayPal
If you think that we made a good job ... donate is your free choice
- About
thx to ...


btw if someone dont know for what is this ... this tool is a multireader of many code system using only Phoenix

tested on ..

Seca:

4.0
4.1
7.0
7.1
7.3
9.0
9.1
A.0 (DNASP400 Rev401)
A.0 (DNASP400 RevI41)
A.0 (DNASP400 RevI4A)
A.0 (DNASP402 RevL00)


Conax:

cas5
cas7


Viaccess:

v2.3
v2.4
v2.5
v2.6
v3.0
v4.0
v5.0


Irdeto :

ACS 1.2
ACS 1.9
ACS 3.82
ACS 3.83
ACS 3.84
ACS 4.1
ACS 5.0
ACS 6.0


Irdeto3 & Hybrid:

ACS 5.0
ACS 6.0 / CryptoWorks


CryptoWorks:

Bios 02v54
Bios 03v47
Bios 05v65
Bios 06vA0


Nagra:

DNASP102 Rev105
DNASP102 Rev107
DNASP110 RevAC6
DNASPS01 Dsh606
DNASPS02 Dsh809
DNASP142 RevG02
DNASP142 RevGC5
DNASP180 Mer000
DNASP180 MerJ00 (DNASP401 RevJ00)

Nagra 1 not supported


DGCrypt

here is new beta version , there was small bug with Nagra reset card and with Phoenix on rs232

....DOWNLOAD HERE NEW BETA VERSION - BUG FIXED....

new beta 437

new beta 437

- added Nagravision precam (prefix 80,81,82) to postcam conversion, should work in Tab-s: Send, Bombing, pretopost, bintotxt

- added Spanish Language - thx to lamentos@

.......DOWNLOAD HERE BETA 437.......

v2.0.0.445

- Added nagra pre to post for prefixes 80,81,82
- Added Spanish language
- Added Send (serial,SA) optpion in logger
- Added send (serial,SA) option in bin to txt
- Added Custom card filter option on logger in set send(Serial,SA)
- Added Custom card filter option on bintotxt in set send(Serial,SA)
- Added support to viaccess cards Emm send in Send option in logger and bintotxt
- Added check change in tabs Logger and binttotxt in Send option
- Rewited way how emm was sended to card in logger and bintotxt tab now it's making by the stack
- Added option to deleay between sending EMMs in bombing tab


...DOWNLOAD BETA 445...

New Beta v2.1.0 build 478

New Beta v2.1.0 build 478


- Added Linux receiver - Option - as reader (cheange version to 2.1.x.xxx)
- Added settings for linux E2 recievier: with such options as:
* Connection options: host, port, login, pass
* SCI Card reader path
* Kill process wich can using reader (oscam, cccam, mgcam)
* Run proccess if killed on disconnect

- Added remembering settings for linux receiver to settings.ini
- Added SCI Errors recognition, like tuner not supported, sci bussy etc..
- Added set paramaters to sci reader depending of Card ATR
- Added debug comuniaction for sci
- Added reset button support for sci
- Added SCI mode - Card Read support for systems:
* Seca
* Nagravision
* Conax
* Viaccess
* DGcrypt
* Irdeto not tested and CryptoWorks partialy

- Added SCI support for Send tab for systems:
* Seca
* Nagravision
* Conax
* Viaccess
* DGcrypt
* CryptoWorks
* Irdeto - not tested

- Added SCI support for tabs Bombing, BruteForce, Logger for following Systems
* Seca
* Nagravision
* Conax
* Viaccess
* DGcrypt
* CryptoWorks
* Irdeto - not tested



As you know this is a beta version so there is certainly still a lot of mistakes , but unfortunately tests are needed
This option aims to use the readers of E2 receivers , for example , reading cards, send logs, autoupdateetc


It should work on all receivers with E2

to connect to the card in the receiver select "Enigma2 Linux"
click the button "Sett." and pops up a window with the settings
enter the IP address of our receivers and if the rest we changed a password or else , enter correct
also choose No reader sci0 - upper , sci1 - lower
select the "Kill process if using reader"
select the "Run Process killed on disconnect"
click "Save and Close"
click "Connect"



.
.
.


.......-----DOWNLOAD HERE-----.......

The Last Drakkar - beta v2.1.1.498

The Last Drakkar - beta v2.1.1.498


- Added option soft dump to logger tab - cheange version to (2.x.1.xxx)
- Added pidscan for soft dump
- Added channelNames for soft dump pid scan
- Added Update type to soft dump pid scan
- Added dumping soft type 0 from sattelite
- Added showing procentage of dump
- Added showing actulal block
- Added saving complete dumped file to bin on hdd
- Added saving complete dumped file to txt on hdd
- Added types of SoftDump in logger tab:
* Block
* Block Hard & Slow
* CA msg
* CA msg Hard & Slow
- Added sort of CA Msgs
- Added stop on repeat racord in CA dump
- Added Dump again missing blocks in Block softDump option
- Added Dump form 0 to last block in Block softDump option

thx to numind@

- Added added new option in linux receivers conncetion settings "run killed process after connected to reader"
- Added full support for Read Info in Cryptoworks cards on Linux Enigma2 as reader
- Added Portugal Brasil language - thx to PicGrabber@
- Added support to read Irdeto and Irdeto3 hybrid





in The Last Drakkar tool we add option "SoftDump"
now everybody can catch/logg firmware updates , sended by providers to our receivers

all stream data are public and The Last Drakkar tool nothing change in side updates software

dumped files we save only in .bin or .txt files on our PC hdd

short faq:

- go to the transponder where provider send updates
- choose "SoftDump" and click "Get Pids"
- choose PID what u want to logg , choose where to save and file name and click "start"


options:

-Block - normal - wait max 20 sec , if nothing goes then change
-Block Hard&Slow - wait max 2 min , if nothing goes then change
-CA - normal - wait max 20 sec , if nothing goes then change
-CA Hard&Slow - wait max 2 min


we do not accept any responsibility for the uploading or modifications these firmware !


.....----- DOWNLOAD HERE -----.....

The Last Drakkar - beta v2.1.2.523

The Last Drakkar - beta v2.1.2.523



Changes from v2.1.1 build 502 :

- Fixed some i/o errors

- Fixed displaing viacces card comuniaction in enigma2 linux mode

- Added date and time in filename when saving card info to file

- Added check card every number of instructions when sending emms in bintotxt tab

- Added German language thx to Owen Hart

- Fixed Viaccess BOX Id set in ExtInfo tab

- Fixed error During logging when you push stop button

- Added DREcrypt cards support change version to x.x.2.xxx, what was added:

* Drecrypt Cards recognition in phoenix and E2 mode

* Read Dre serial,

* Read geo code

* Read Provider name

* Read DREcrypt card version

* Calculation DRE ID

* Read PBM

* Read packages

* Read Dates From-To in Packages

* Conversion dates to user friendly format

* Calculation DREcrypt CheckSum in send tab and bruteforce tab

* Added support for saving DREcrypt card info to txt file

- fixed init conax cards bug without provider data





.....----- DOWNLOAD HERE -----.....


password to unzip the file is in the name of this file

The Last Drakkar - beta v2.1.2.536

The Last Drakkar - beta v2.1.2.536



changes from stable v2.1.2.529:

- walkaround dm800se sci driver bug, there was a problem with reading long answers of cards

- fixed problem in Send tab for sci reader

- fixed displaing inverted comunication in BruteForce tab for Viaccess cards

- Added Romanian language

- fixed bug Nagra card update 82,83 - Testing

- fixed Hardware Logger bugs - Testing

- Added - Save and Load Com Port settings for Hardware Logger






.....----- DOWNLOAD HERE -----.....


password to unpack Zip file is thelastdrakkar.com

you know how to write in english language but you dont know how to read ?? like i write bro , read first page of this thread and you will know.

now...

The Last Drakkar - beta v2.2.2.550


- PC/SC reader support (change version to x.2.x.x) (Card Systems: Nagravision, Irdeto and DGcrypt will NOT be supported in PC/SC mode):
- Added PC/SC mode option
- Added PC/SC configuration under Sett. button
- Added connection and card system recognition in PC/SC mode
- Added reset button functionality in PS/SC mode
- Added support for PIN find and change in PC/SC mode
- Added read card and sending instructions for following Card systems:
* Seca
* Conax
* CryptoWorks
* Irdeto3 hybrid
* Viaccess - some known Read Card problems - works but slow
* DREcrypt
- Added Saving PC/SC mode and reader name to settings.ini file



***
***
***

.....----- DOWNLOAD HERE -----.....


***

password to unpack ZIP file is thelastdrakkar.com

The Last Drakkar - beta v2.2.2 build 569

Merry Xmas

The Last Drakkar - beta v2.2.2 build 569


- Added Irdeto ASCII serial number checksum
- Added PIN change for Conax cards
- Added read language/region/provider and Maturity Rating for Conax cards
- Added Maturity Rating change button for Conax cards
- Added saving to file info about language/region/provider and Maturity Rating for Conax cards
- Fixed cacluculate baudrate for Conax card with ATR : 3B34940030423030
- Fixed CPU-core full load, in PC with no pcsc reader installed ever
- Added information about possible Maturity Rating values for Conax Cards, information will be appear when mouse pointer is over Maturity Rating field
- BinToTxt tab: accelerated loading .bin files with EMM's
- Global performance improvement
- Fixed Precam to Postcam Irdeto emm 82 conversion
- Added sh4 (ex. nbox) SCI support, should work on systems: Conax, Seca (other systems not- tested/supported yet)
- Added Greek FAQ in FAQ tab. - thx to jor@






---------------DOWNLOAD---------------

password always the same: thelastdrakkar.com

The Last Drakkar - beta v2.2.3 build 599

The Last Drakkar - beta v2.2.3 build 599

changes from v2.2.3.591 stable:

- Fixed correct information if connection to update server is not available.
- Added time of brute force
- French language new version
- BitCoin Donation removed
- Fixed Viaccess card update init
- Added Conax card update answers 98xx support
- Added max number of sessions in Conax card read
- Fixed SoftDump and speedup save dump to bin file


---------------DOWNLOAD---------------

pass like always the same: thelastdrakkar.com

The Last Drakkar - beta v2.2.3 build 600


changes from v2.2.3.599 beta:

- Autoupdate NTV+ Viaccess provider ID 040610 thx to mafe@ & root_pl@


---------------DOWNLOAD---------------

pass like always: thelastdrakkar.com

The Last Drakkar - beta v2.2.3 build 606

The Last Drakkar - beta v2.2.3 build 606


changes from v2.2.3.600 beta:

- Donate Window will not show on start
- Some fixes in translations
- Fixed bugs in Brute Force tab
- Fixed Irdeto Hybrid File3 read
- Fixed card recognition Irdeto 5.7, and fixed start date for this card
- Added option Auto Check Updates on application startup


---------------DOWNLOAD---------------

pass : thelastdrakkar.com

The Last Drakkar - beta v2.2.3 build 615


changes from last stable version:

- Fixed bug - error show on start when operating system has specific language like chinese
- Fixed bug - new LD beta version was found on start in window was wrong infomation that new stable version was found
- Added chinese language
- Added slovak language
- Added nagra3 check card to check 4xx version of ROM 180 cards in phoenix mode - thx to atari@
- Fixed hex to ansi converter in calc tab, if hex has bytes lower than 31 and higher than 128 then was problem with showing all strings now its replaced with '?' char
- Fixed some irdeto3 hybrid issues like , added checksum to dec serial, fixed length of hex serial and fixed in file 2 and 3 read




---------------DOWNLOAD---------------

pass: thelastdrakkar.com

in LD in window you will see all cmd's etc
mark "debug" and then click "connect"
'LOG' window

The Last Drakkar - beta v2.2.5 build 650

What was changed from stable version:

- Fixed Viaccess EMM send in Logger tab. In Viaccess card was wrong answer SW 9040 after sent some 8C/8D EMM.
- Fixed Viaccess EMM send in BinToTxt tab.
- Fixed Viaccess EMM send in Bombing tab. Changes are also in emm search website.

...DOWNLOAD...


pass is:

thelastdrakkar.com