X7 and other receiver does not start!
play before a firmware either ask or see for myself
here:Receiver ID and CHIP ID
Code:
.
.
Menu> Tools> Info: ID-receiver or STB ID
Chip ID - 9 79d9265e2c1010?
Chip ID - 9c79d321282c1010
Chip ID - 9d694bad6a7d1010
Chip ID - 9c79d22d542c1010
Chip ID - 9 e21a095e2c1010?
Chip ID - 9d52421870bc1010
Chip ID - 9ce21925223c1010
Chip ID - .... 8bc1010
Chip ID - 9d694c354a7c1010
Chip ID - 9d69448 4 b 1010?
ID: 06000b00: 00076d
ID: 06000b00: 000584
ID: 06000600: 002c43
ID: 06000b00: 000393
ID: 06000700:0030 b0
ID: 06000b00: 002ca3
ID: 06000700-002e1b
ID: 06000b00: 0026d0
ID: 06000b00: 002c92
-------------------------------------------------- -------------------
not start (H / W rroblem ...):
Chip ID - 00ea71b88f7c1010
Chip ID - 9dbea0d3a7c1010
Chip ID - 9d7be795ecfc1010
Chip ID - 011049475b5c1010
Chip ID - 9d7be9aae25c1010
Chip ID - 00ea86387a7c1010
Chip ID - 01392b9af1dc1010
Chip ID - .... 8bc1010
Chip ID - 9d473a13627c1010
Chip ID -
Chip ID - 9d7be8b0fe5c1010
Chip ID - 9d7be3a4acfc1010
ID: 06000b00: 0a1549
ID: 06000700:0 a2c4d
ID: 06000b00: 0a1f06
ID: 06000b00: 0a1f71
ID: 06000b00: 0a0f89
ID: 06000b00: 0a2c2f
ID: 06000b00: 0a0210
ID: 06000b00: 0a3085
ID: 06020200:0 a0e25
ID: 06000b00: 0a15ff
ID: 06000b00: 0a1665
- Examples: 06000b00 We have a receiver ID: 000 76d - you can flash.
We have a receiver ID -06,020,700: 00 365C - you can flash.
We have the ID_addressee - 06000200: 0 a0549 - Flash can not be performed
If incorrect firmware was taken without regard to chip here:
Help my receiver will no longer JTAG case?
Now just stands there ASH.
Via RS232 anything is possible.
so after eromupgrade please upgrade with the normal firmware (Original firmware)
Here's my order:
> EromUpgrade.exe open COM port and set
> In the "File" menu select the [Browse] button and specify an appropriate firmware for your receiver
> Hacking with "Include bootloader" Set
> Click on Next
> Wait until it is before switching off the receiver
> Normal loader open, as load "Upgrade Tool v2.0.0c" and the appropriate firmware so again.
> Now everything ok.