Nabilosat DM8000 Images

elgeneral

Registered
Messages
7,811
Nabilosat DM8000 Pure Flash 01JAN09, with Barry Allen 4.6.52​


What is the Nabilosat DM8000 Pure Flash ?

This image is a simple, pure CVS image to install to flash memory. It is reccomended to those who like the multiboot option with Barry Allen. It is light, fast, reliable and, most of all, upated. Therefore, it is the best solution for multiboot purposes.

What is included in this image ?

This image is including the latest available edition of Barry Allen: 4.6.52

Why should I install this image in flash ?

Because it includes all the latest drivers and kernel modules required to install new images in multiboot. Nabilosat team is about to release version 0.6 of its Black Hole image. If installed to multiboot, the new Black Hole v0.6 requires an updated image in the flash memory. For this reason, Nabilosat team prepared this Pure version for you.

How do I install Barry Allen with this image ?
Barry Allen will be automatically installed at the end of the default wizard

Will I loose the images already installed on my media ?

No, you will not loose any of your favourite images, already installed to your media. You will reboot and find them again, ready to be used.

How do I install it to flash ?
You can install it via WebInterface or via serial. However, it is important that you read the simple instructions reported here under.

Release Details

NEW Nabilosat HD JPG logo by MaximoII. Bootlogos by Army
Barry Allen 4.6.52 included
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm8000"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft"
COMPILED DATE = "27 december 2008"
ENIGMA2_CVS_DATE = "27 december 2008"
ENIGMA2_VERSION = "2.6 experimental"
DRIVERS = "09 December 2008"
SECOND STAGE = "70"
BARRY_ALLEN_VERSION = "4.6.52"



Instructions

1) Flash your DM 8000 with Web Interface or DreamUp and serial cable
2) Complete the Default Wizard to setup the basic steps
3) Upon Wizard completion, you will be prompted to press OK to install Barry Allen
4) Press OK once, and wait for the Wizard to install Barry Allen
5) When Barry Allen is updated, the Default Wizard will be completed.
6) Reboot your Dreambox

Barry Allen will have been updated. You will find your previous images listed, choose your favorite as always.

Code:
http://rapidshare.com/files/178763414/Nabilo_DM8000_PureFlash_01jan09.zip
 

elgeneral

Registered
Messages
7,811
Nabilosat Enigma2 Black Hole - DM8000 v0.6

Nabilosat Enigma2 Black Hole - DM8000 v0.6


What is new in this version 0.6 ?

************************************************** *
Nabilosat Exclusive: Enigma2 Integrated Sky IT and Sky Uk EPG
************************************************** *


Nabilosat Team is proud to announce a new feature available exclusively through its image Black Hole v0.6. Download Sky It and Sky Uk weekly EPG and have them integrated to Enigma2. Sky IT is available for download from Marco Polo or other channels on the same transponder. Sky Uk is available for download from Hip Hop Radio channels. By MaxZ4. Great job MaxZ4

EPG DYNAMIC SYSTEM POPUP

A popup will dynamically provide information about titles and descriptions found and downloaded

CHANNEL LIST EPG SELECTION AVAILABLE

Select and download the EPG only for your preferred channels. Exclude unwanted channels, and speed up the download.

CHANNEL LIST UPDATE OPTION

Automatically update the channel list after any provider retuning.

New skin Nabilosat HD Zero by Matrix10

Matrix10 released a brand new HD skin for this new version of Black Hole. Great job Matrix10

Bootlogos

New Bootlogos and New Bootlogo JPG. By ^^MaXiMoII^^

NOTE

You can install this image to flash, without any further support.
You can install this image to multiboot. In this case, you must have the Nabilosat Pure Flash 01JAN09 installed to flash. This is necessary because the flash image must include the second stage #70
Nabilosat DM 8000 Pure Flash dated 01 January 2009 is available http://www.sat-universe.com/showthread.php?p=313147#post313147

Enigma2 CVS date

27/12/2008

Drivers date

09/12/2008

OSD with Channel Number

The OSD Info Bar will now display the channel list number.

OSD with Orbital Position and Satellite Name

The OSD Extra Info Bar will now display the Satellite name and orbital position

Web Interface

Button icons fixed. Now you know what to press on your remote control.

Grabber
The Grabber version is the latest available

Latest Plugins tested and integrated in the image

autoresolution
autotimer
dvdburn
dvdplayer
emailclient
epgrefresh
fritzcall
googlemaps
httpproxy
lastfm
ofdb
passwordchanger
simplerss
startuptostandby
trafficinfo
unwetterinfo
vlcplayer
webcamviewer
werbezapper
youtubeplayer
zaphistorybrowser

positionersetup
cutlisteditor
configurationbackup
satfinder
videotune
mediascanner
webinterface
graphmultiepg
skinselector
pictureplayer
mediaplayer
hotplug
networkwizard

NOTE

Most plugins will be available in MENU>PLUGINS or Nabilo Green Panel. Other plugins will be available in the Extesions Menu ( long press blue button )

Main Function Keys

Button 1xOK = Light Info Skin
Button 2xOK = Extra Info Skin
Button Blue = Nabilo Blue Panel
Button Blue-Long-Push = Extensions
Button Green = Nabilo Green Panel
Button Green-Long-Push = Subservices
Button Red = Start Record
Button Yellow = Time Shift


Addons

Dedicated Addons Server
Download and install additional packages from Nabilosat server

Infobar/OSD

Enigma2 Analogic Clock
Channel Orbital Position

Advanced Tuner Info: Sr Freq Pol Fec
Signal SNR, BER
Infobar Picons
LCD/OLED Picons
Advanced EMU information

Nabilo Panels features

1) Blue Panel


Setup

OSD Settings
Nabilosat E2 EPG Settings
NEW LCD Settings
Fast Plugin Settings
Inadyn Settings
Swap File Settings
Hard Disk Setup
Nabilo Mount Wizard
OpenVPN Panel
Samba/Cifs Panel
NFS Server Panel
Telnet Panel
FTP Panel

Info

CCcam Info
Memory Info
Available Space
Processes
Service Info
Enigma2 Settings
About

Save

Select/Start/Restart EMU

2) Green Panel

Shoutbox
Fast Plugin
Addons


Addons Download Manager
Manual Install Nab packages
Manual Install IPK packages
Addons Uninstall Panel
Nabilosat Statistics

Scripts

Many thanks to 2tone, adga, snakie, jchv13 for tests and reports

Nabilosat Team

Black33, ^^Corrado^^, Maximo II, greg, snakie, Matrix10, Porto, Nabilo, Army, Piefav, Franzjuve, Willow, fbrassin, Neri73, paribas, astemio, lorenzo64, frimmino, nixus, robyhummy, DeepDiver

Credits
E2 Sky Epg loader integration by MaxZ4.
Matrix10 for the new HD Zero skin.
^^MaXiMo^^ and Army for bootlogos.
Many Thanks to lukkino (VDR-Italia) for opentv source code.


This Images doesn't contain any keys nor softcams.
Backups or other modified Images are not supported!


53861111aq1.jpg

60232639gz6.jpg

68870084fy9.jpg

43297458xv2.jpg

70763586yg6.jpg

31602065ra8.jpg

55175403he8.jpg

86981438rq4.jpg

40774141bz4.jpg

10al7.jpg

11ie9.jpg

12fs0.jpg


WARNING.
This image includes second stage #70. Therefore, if you install it to multiboot, it will not work with any previous image in flash. If you install it to multiboot, you must install the Nabilosat Pure Flash DM 8000 dated 1st of January 2009.

ATTENZIONE.
Questa immagine include il second stage #70. Quindi, se la installate in multiboot, assicuratevi di aver installato in flash la Nabilosat Pure Flash DM 8000 del 1 Gennaio 2009.

Code:
http://www.sendspace.com/file/e0mjr4
 

mactep

Registered
Messages
55
Nabilosat Enigma2 Black Hole - DM8000 v0.6

Nabilosat Enigma2 Black Hole - DM8000 v0.6


What is new in this version 0.6 ?

************************************************** *
Nabilosat Exclusive: Enigma2 Integrated Sky IT and Sky Uk EPG
************************************************** *

Nabilosat Team is proud to announce a new feature available exclusively through its image Black Hole v0.6. Download Sky It and Sky Uk weekly EPG and have them integrated to Enigma2. Sky IT is available for download from Marco Polo or other channels on the same transponder. Sky Uk is available for download from Hip Hop Radio channels. By MaxZ4. Great job MaxZ4

EPG DYNAMIC SYSTEM POPUP

A popup will dynamically provide information about titles and descriptions found and downloaded

CHANNEL LIST EPG SELECTION AVAILABLE

Select and download the EPG only for your preferred channels. Exclude unwanted channels, and speed up the download.

CHANNEL LIST UPDATE OPTION

Automatically update the channel list after any provider retuning.

New skin Nabilosat HD Zero by Matrix10

Matrix10 released a brand new HD skin for this new version of Black Hole. Great job Matrix10

Bootlogos

New Bootlogos and New Bootlogo JPG. By ^^MaXiMoII^^

NOTE

You can install this image to flash, without any further support.
You can install this image to multiboot. In this case, you must have the Nabilosat Pure Flash 01JAN09 installed to flash. This is necessary because the flash image must include the second stage #70
Nabilosat DM 8000 Pure Flash dated 01 January 2009 is available http://www.sat-universe.com/showthre...147#post313147

Enigma2 CVS date

27/12/2008

Drivers date

09/12/2008

OSD with Channel Number

The OSD Info Bar will now display the channel list number.

OSD with Orbital Position and Satellite Name

The OSD Extra Info Bar will now display the Satellite name and orbital position

Web Interface

Button icons fixed. Now you know what to press on your remote control.

Grabber
The Grabber version is the latest available

Latest Plugins tested and integrated in the image

autoresolution
autotimer
dvdburn
dvdplayer
emailclient
epgrefresh
fritzcall
googlemaps
httpproxy
lastfm
ofdb
passwordchanger
simplerss
startuptostandby
trafficinfo
unwetterinfo
vlcplayer
webcamviewer
werbezapper
youtubeplayer
zaphistorybrowser

positionersetup
cutlisteditor
configurationbackup
satfinder
videotune
mediascanner
webinterface
graphmultiepg
skinselector
pictureplayer
mediaplayer
hotplug
networkwizard

NOTE

Most plugins will be available in MENU>PLUGINS or Nabilo Green Panel. Other plugins will be available in the Extesions Menu ( long press blue button )

Main Function Keys

Button 1xOK = Light Info Skin
Button 2xOK = Extra Info Skin
Button Blue = Nabilo Blue Panel
Button Blue-Long-Push = Extensions
Button Green = Nabilo Green Panel
Button Green-Long-Push = Subservices
Button Red = Start Record
Button Yellow = Time Shift


Addons

Dedicated Addons Server
Download and install additional packages from Nabilosat server

Infobar/OSD

Enigma2 Analogic Clock
Channel Orbital Position

Advanced Tuner Info: Sr Freq Pol Fec
Signal SNR, BER
Infobar Picons
LCD/OLED Picons
Advanced EMU information

Nabilo Panels features

1) Blue Panel

Setup

OSD Settings
Nabilosat E2 EPG Settings
NEW LCD Settings
Fast Plugin Settings
Inadyn Settings
Swap File Settings
Hard Disk Setup
Nabilo Mount Wizard
OpenVPN Panel
Samba/Cifs Panel
NFS Server Panel
Telnet Panel
FTP Panel

Info

CCcam Info
Memory Info
Available Space
Processes
Service Info
Enigma2 Settings
About

Save

Select/Start/Restart EMU

2) Green Panel

Shoutbox
Fast Plugin
Addons

Addons Download Manager
Manual Install Nab packages
Manual Install IPK packages
Addons Uninstall Panel
Nabilosat Statistics

Scripts

Many thanks to 2tone, adga, snakie, jchv13 for tests and reports

Nabilosat Team
Black33, ^^Corrado^^, Maximo II, greg, snakie, Matrix10, Porto, Nabilo, Army, Piefav, Franzjuve, Willow, fbrassin, Neri73, paribas, astemio, lorenzo64, frimmino, nixus, robyhummy, DeepDiver

Credits
E2 Sky Epg loader integration by MaxZ4.
Matrix10 for the new HD Zero skin.
^^MaXiMo^^ and Army for bootlogos.
Many Thanks to lukkino (VDR-Italia) for opentv source code.


This Images doesn't contain any keys nor softcams.
Backups or other modified Images are not supported!

Old attachment removed to preserve space
 

elgeneral

Registered
Messages
7,811
FIX MHW EPG on DM8000 Black Hole 0.6

Tnx to our great MaxZ4, MHW EPG is now available again on Black Hole images. A pop up window with dynamic information has been added.
See the screenshot, taken on Cyfra+ channels.

This fix applies only to DM8000 equipped with Nabilosat Enigma2 Black Hole images v0.6. Do not apply to other DM models.
Upon installation Enigma2 will automatically restart.
Also available for download from the plugins section of Nabilo Green Panel

Enjoy Nabilosat Images.
 

k@lkov

Super VIP
Messages
10,003
Nabilosat Enigma2 Black Hole DM8000 v0.7

Code:
[B]What is new in this version 0.7?[/B]

Nabilosat Black Hole v0.7 is highly optimized to offer 
an HD skin with best performance, speed and reliability.

EPG Loader
Updated OpenTV EPG Loader by MaxZ4

NEW EPG SEARCH FEATUREs

Open the TV channel selection list and use keys 1,2,3 
and 4 to launch the new options

KEY 1 will launch the EPG Search for titles
KEY 2 will shortcut the single channel EPG. 
Move the cursor to select the channel and press 2
KEY 3 will shortcut Multi EPG.
KEY 4 will list the last search keywords. Use it to 
repeat previous or favorite searches.

NABILO E2 EPG - Enable/Disable Pop Up Window

A new setting is added to the Nabilo E2 EPG. Set it to NO
if you want to hide the EPG download Pop Up window

NABILO INFO PANEL - HDD Temperature

A new information is added to the panel. Press the Blue button, 
then the Yellow button and select HDD temperature to check 
how hot your hard disk is.

Skin Nabilosat HD One by Matrix10

[B]Bootlogos[/B]
New Bootlogos and New Bootlogo JPG. By ^^MaXiMoII^^

[B]NOTE[/B]
You can install this image to flash, without any further support.
You can install this image to multiboot. In this case, you must 
have installed to flash an image with DVB drivers dated 05/01/09
Images with previous versions of DVB drivers will cause malfunction.

Enigma2 CVS date 16/01/2009 experimental 2.6
Drivers date 05/01/2009
Second Stage #70

[B]NOTE[/B]
Plugins are available for download from the Nabilosat Addons Panel. Press 
the Green button and then the Yellow button to launch the Addons Panel.

[B]Main Function Keys[/B]
Button 1xOK = Light Info Skin
Button 2xOK = Extra Info Skin
Button Blue = Nabilo Blue Panel
Button Blue-Long-Push = Extensions
Button Green = Nabilo Green Panel
Button Green-Long-Push = Subservices
Button Red = Start Record
Button Yellow = Time Shift

[B]Addons[/B]
Dedicated Addons Server
Download and install additional packages from Nabilosat server

[B]Infobar/OSD[/B]
Enigma2 Analogic Clock
Channel Orbital Position

[B]Advanced Tuner Info:[/B] Sr Freq Pol Fec
Signal SNR, BER
Infobar Picons
LCD/OLED Picons
Advanced EMU information

[B][COLOR="Red"]Nabilo Panels features[/COLOR][/B]
[B]1) Blue Panel[/B]
Setup
OSD Settings
Nabilosat E2 EPG Settings
NEW LCD Settings
Fast Plugin Settings
Inadyn Settings
Swap File Settings
Hard Disk Setup
Nabilo Mount Wizard
OpenVPN Panel
Samba/Cifs Panel
NFS Server Panel
Telnet Panel
FTP Panel
Info
CCcam Info
Memory Info
Available Space
Processes
HDD Temp
Service Info
Enigma2 Settings
About
Save
Select/Start/Restart EMU

[B]2) Green Panel[/B]
Shoutbox
Fast Plugin
Addons
Addons Download Manager
Manual Install Nab packages
Manual Install IPK packages
Addons Uninstall Panel
Nabilosat Statistics
Scripts

[B]Many thanks to the Beta Testers Team[/B]
Black33, ^^Corrado^^, Maximo II, greg, Matrix10, Porto, 
Nabilo, Army, Piefav, Franzjuve, Willow, fbrassin, Neri73, 
paribas, astemio, lorenzo64, frimmino, nixus, robyhummy,
snakie, DeepDiver

[B]Credits[/B]
E2 Sky Epg loader integration by MaxZ4.
Matrix10 for the new HD One skin.
^^MaXiMo^^ for bootlogos.
Many Thanks to lukkino (VDR-Italia) for opentv source code.

This Images doesn't contain any keys nor softcams.
Backups or other modified Images are not supported!

[B]WARNING:[/B] THIS IMAGE MUST BE INSTALLED TO FLASH.
Black Hole images supprt to BA is suspended because of 
recent Barry Allen additions and system controls.
Black Hole Images are now intended to be installed in flash 
without Barry Allen.
IF YOU WANT TO USE THIS IMAGE IN MULTIBOOT YOU NEED 
TO HAVE IN FLASH AN IMAGE WITH DVB-DRIVERS OF 05.01.2009 
ELSE BLACK HOLE IMAGE WILL NOT WORK PROPERLY.
Code:
http://rapidshare.com/files/185532042/NabiloBlackHole_DM8000_07.zip
 

marce

VIP
Messages
7,115
Nabilosat Enigma2 Black Hole - DM8000 v0.8 AG



Nabilosat Enigma2 Black Hole - DM8000 v0.8 AG

Advanced Graphics

What is new in this version 0.8 ?

Nabilosat v 0.8 is the first image introducing advanced graphic engine with effects and animations.
The graphic enigne is highly optimized to have the best and faster E2 image in HD resolution 1280x720.​

New Skin
HD skin Black Shadow By Matrix10
shot5zr6.jpg


shot6tk2.jpg


NEW HD BOOT LOGOS
High resolution bootlogos by MaximoII

shot10cl6.jpg


New Graphic Engine
Enigma graphic engine starts up directly in HD
New Effects and animations
Animation during CAM start

startcamme9.gif


shot2in9.jpg


New Effects and animations
Animation during Addons Server Connection

connectionno7.gif


shot1gs3.jpg


New System Monitor Panel
New and Revolutionary Graphic System Monitor Panel (1x Blue + 1x Yellow)

shot7wk9.jpg



New System Monitor Panel

Monitor popup animation in System Monitor Panel

shot8jl8.jpg


Enigma2 CVS date

16 February 2009 2.6 experimental

Drivers date

07 February 2009

Second Stage #71-pr1


Main Function Keys

Button 1xOK = Light Info Skin
Button 2xOK = Extra Info Skin
Button Blue = Nabilo Blue Panel
Button 1x Blue + 1x Yellow = New System Monitor Panel
Button Blue-Long-Push = Extensions
Button Green = Nabilo Green Panel
Button Green-Long-Push = Subservices
Button Red = Start Record
Button Yellow = Time Shift

Addons

Dedicated Addons Server
Download and install additional packages from Nabilosat server

Infobar/OSD

Enigma2 Analogic Clock
Channel Orbital Position

Advanced Tuner Info: Sr Freq Pol Fec
Signal SNR, BER
Infobar Picons
LCD/OLED Picons
Advanced EMU information

Nabilo Panels features

1) Blue Panel

Setup


OSD Settings
Nabilosat E2 EPG Settings
LCD Settings
Fast Plugin Settings
Inadyn Settings
Swap File Settings
Hard Disk Setup
Nabilo Mount Wizard
OpenVPN Panel
Samba/Cifs Panel
NFS Server Panel
Telnet Panel
FTP Panel

System Monitor Panel

CCcam Info
Service Info
Enigma2 Settings
About

Memory
Space
CPU
Process

Save

Select/Start/Restart EMU

2) Green Panel

Shoutbox
Fast Plugin
Addons

Addons Download Manager
Manual Install Nab packages
Manual Install IPK packages
Addons Uninstall Panel
Nabilosat Statistics

Scripts

Many thanks to the Beta Testers Team

^^Corrado^^,Neri73, Ferbius

Credits
E2 Sky Epg loader integration by MaxZ4.
Matrix10 for the new Black Shadow skin.
Army for the new System Monitor Panel graphics.
^^MaXiMo^^ for bootlogos.
Many Thanks to lukkino (VDR-Italia) for opentv source code.


This Images doesn't contain any keys nor softcams.
Backups or other modified Images are not supported!
 

vegeku90

Registered
Messages
1,586
Nabilosat DM8000 Pure Flash 18FEB09, with Barry Allen 4.6.79

Nabilosat DM8000 Pure Flash 18FEB09, with Barry Allen 4.6.79


What is the Nabilosat DM8000 Pure Flash ?
This image is a simple, pure CVS image to install to flash memory. It is reccomended to those who like the multiboot option with Barry Allen. It is light, fast, reliable and, most of all, upated. Therefore, it is the best solution for multiboot purposes.
What is included in this image ?
This image is including the latest available edition of Barry Allen: 4.6.79
Why should I install this image in flash ?
Because it includes all the latest drivers and kernel modules required to install new images in multiboot. Nabilosat team is about to release version 0.8AG of its Black Hole image. If installed to multiboot, the new Black Hole v0.8AG requires an updated image in the flash memory. For this reason, Nabilosat team prepared this Pure version for you.
How do I install Barry Allen with this image ?
Barry Allen will be automatically installed at the end of the image Setup Wizard. A console window will provide on screen installation status progress.
Will I loose the images already installed on my media ?
No, you will not loose any of your favourite images, already installed to your media. You will reboot and find them again, ready to be used.
How do I install it to flash ?
You can install it via WebInterface or via serial. However, it is important that you read the simple instructions reported here under.
Release Details

NEW Nabilosat HD bootlogo by MaximoII.
Barry Allen 4.6.79 included
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm8000"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft"
COMPILED DATE = "18 February 2009"
ENIGMA2_CVS_DATE = "15 February 2009"
ENIGMA2_VERSION = "2.6 experimental"
DVB DRIVERS = "07 February 2009"
SECOND STAGE = "71-pr1"
BARRY_ALLEN_VERSION = "4.6.79"



Instructions
1) Flash your DM 8000 with Web Interface or DreamUp and serial cable
2) Complete the Default Wizard to setup the basic steps
3) Upon Wizard completion, Barry Allen will automatically install
4) Follow the on screen information
5) When the install is complete, the DM will restart and new BA version will be available in the plugin MENU.

Barry Allen will have been updated. You will find your previous images listed, choose your favorite as always.

Download available

Code:
http://www.MegaShare.com/594870
 

vegeku90

Registered
Messages
1,586
Nabilosat Enigma2 Black Hole - DM8000 v0.8 AG

Nabilosat Enigma2 Black Hole - DM8000 v0.8 AG

Advanced Graphics


What is new in this version 0.8 ?

Nabilosat v 0.8 is the first image introducing advanced graphic engine with effects and animations.
The graphic enigne is highly optimized to have the best and faster E2 image in HD resolution 1280x720.




New Skin
HD skin Black Shadow By Matrix10​
shot5zr6.jpg


shot6tk2.jpg

NEW HD BOOT LOGOS
High resolution bootlogos by MaximoII​

shot10cl6.jpg

New Graphic Engine
Enigma graphic engine starts up directly in HD​
New Effects and animations
Animation during CAM start​
startcamme9.gif


shot2in9.jpg

New Effects and animations
Animation during Addons Server Connection​
connectionno7.gif


shot1gs3.jpg

New System Monitor Panel
New and Revolutionary Graphic System Monitor Panel (1x Blue + 1x Yellow)​

shot7wk9.jpg

New System Monitor Panel
Monitor popup animation in System Monitor Panel​
shot8jl8.jpg


Enigma2 CVS date
16 February 2009 2.6 experimental​
Drivers date
07 February 2009​
Second Stage #71-pr1


Main Function Keys
Button 1xOK = Light Info Skin
Button 2xOK = Extra Info Skin
Button Blue = Nabilo Blue Panel
Button 1x Blue + 1x Yellow = New System Monitor Panel
Button Blue-Long-Push = Extensions
Button Green = Nabilo Green Panel
Button Green-Long-Push = Subservices
Button Red = Start Record
Button Yellow = Time Shift​
Addons
Dedicated Addons Server
Download and install additional packages from Nabilosat server​
Infobar/OSD
Enigma2 Analogic Clock
Channel Orbital Position

Advanced Tuner Info: Sr Freq Pol Fec
Signal SNR, BER
Infobar Picons
LCD/OLED Picons
Advanced EMU information​
Nabilo Panels features

1) Blue Panel
Setup
OSD Settings
Nabilosat E2 EPG Settings
LCD Settings
Fast Plugin Settings
Inadyn Settings
Swap File Settings
Hard Disk Setup
Nabilo Mount Wizard
OpenVPN Panel
Samba/Cifs Panel
NFS Server Panel
Telnet Panel
FTP Panel​
System Monitor Panel
CCcam Info
Service Info
Enigma2 Settings
About

Memory
Space
CPU
Process​
Save
Select/Start/Restart EMU​
2) Green Panel
Shoutbox
Fast Plugin
Addons
Addons Download Manager
Manual Install Nab packages
Manual Install IPK packages
Addons Uninstall Panel
Nabilosat Statistics​
Scripts
Many thanks to the Beta Testers Team
^^Corrado^^,Neri73, Ferbius

Credits
E2 Sky Epg loader integration by MaxZ4.
Matrix10 for the new Black Shadow skin.
Army for the new System Monitor Panel graphics.
^^MaXiMo^^ for bootlogos.
Many Thanks to lukkino (VDR-Italia) for opentv source code.


This Images doesn't contain any keys nor softcams.
Backups or other modified Images are not supported!



WARNING.
If you install it to multiboot, you must install the Nabilosat Pure Flash DM 8000 dated 18 February 2009. Nabilosat Pure Flash DM8000 18FEB2009 is available here.

Download coming soon

Code:
http://www.MegaShare.com/594942
 

tani1

Staff member
Super Moderator
Messages
17,767
Nabilosat DM8000 Pure Flash 25FEB09, with Barry Allen 4.6.83

Download

Code:
http://www.4shared.com/file/89482813/986e2c0c/Nabilo_DM8000_PureFlash_25feb09.html
 

tani1

Staff member
Super Moderator
Messages
17,767
Nabilosat Enigma2 Black Hole - DM8000 v0.9

Nabilosat Enigma2 Black Hole - DM8000 v0.9

Advanced Graphics


What is new in this version 0.9 ?

Nabilosat v 0.9 is now including by default the new DMM plugins Software Manager, Network Wizard and Mount Manager.
The Samba Server is enabled by default. This solution will allow to Network Browser to locate your DM8000 on your Local Area Network

New:


Devices Managment and mount startup:
As you know in DM8000 we have these Extra Ports:
1 SD card 1 Compact Flash 3 Usb.
These devices can be "hotplugged" or used in stable mode.
In case of hotplug insertion the devices are automounted in DM8000 and you will find them in the folder /autofs.
But if you want to use these devices in stable way and you leave them connected and inserted, the Black Hole image will detect them at startup and will mount in this way:
Sd card -> /media/card
CF -> /media/cf
First Usb -> /media/usb
Second Usb -> /media/usb2
Third Usb -> /media/usb3

New: Skin revision by Matrix10

for new SoftareManager and NetworkBrowser


Enigma2 CVS date

23 February 2009 2.6 experimental

Drivers date

07 February 2009

Second Stage #71-pr1


Main Function Keys

Button 1xOK = Light Info Skin
Button 2xOK = Extra Info Skin
Button Blue = Nabilo Blue Panel
Button 1x Blue + 1x Yellow = New System Monitor Panel
Button Blue-Long-Push = Extensions
Button Green = Nabilo Green Panel
Button Green-Long-Push = Subservices
Button Red = Start Record
Button Yellow = Time Shift

Addons

Dedicated Addons Server
Download and install additional packages from Nabilosat server

Infobar/OSD

Enigma2 Analogic Clock
Channel Orbital Position

Advanced Tuner Info: Sr Freq Pol Fec
Signal SNR, BER
Infobar Picons
LCD/OLED Picons
Advanced EMU information

Nabilo Panels features

1) Blue Panel

Setup

OSD Settings
Nabilosat E2 EPG Settings
LCD Settings
Fast Plugin Settings
Inadyn Settings
Swap File Settings
Hard Disk Setup
Nabilo Mount Wizard
OpenVPN Panel
Samba/Cifs Panel
NFS Server Panel
Telnet Panel
FTP Panel

System Monitor Panel

CCcam Info
Service Info
Enigma2 Settings
About

Memory
Space
CPU
Process

Save

Select/Start/Restart EMU

2) Green Panel

Shoutbox
Fast Plugin
Addons


Addons Download Manager
Manual Install Nab packages
Manual Install IPK packages
Addons Uninstall Panel
Nabilosat Statistics

Scripts

Many thanks to the Beta Testers Team
^^Corrado^^,Neri73, Ferbius

Credits
E2 Sky Epg loader integration by MaxZ4.
Matrix10 for the new Black Shadow skin.
Army for the new System Monitor Panel graphics.
^^MaXiMo^^ for bootlogos.
Many Thanks to lukkino (VDR-Italia) for opentv source code.


This Images doesn't contain any keys nor softcams.
Backups or other modified Images are not supported!

shot1.jpg


shot2d.jpg


shot3g.jpg


shot4.jpg


shot5.jpg


shot6i.jpg


shot7.jpg


WARNING.

If you install it to multiboot, you must install the Nabilosat Pure Flash DM 8000 dated 25 February 2009.
Nabilosat Pure Flash DM8000 25FEB2009 is available here

Code:
http://rapidshare.com/files/202692112/NabiloBlackHole_DM8000_09.zip
 

juli13

Staff member
Administrator
Messages
10,194
Nabilosat DM8000 Pure Flash 02 MAY 09, with Barry Allen 4.8.2

Nabilosat DM8000 Pure Flash 02MAY09, Barry Allen 4.8.2


What is the Nabilosat DM8000 Pure Flash ?

This image is a simple, pure CVS image to install to flash memory. It is reccomended to those who like the multiboot option with Barry Allen. It is light, fast, reliable and, most of all, upated. Therefore, it is the best solution for multiboot purposes.

What is included in this image ?

This image is including the latest available edition of Barry Allen: 4.8.2. System Plugins: Software Manager and new Network Wizard, Mount Manager
Why should I install this image in flash ?
Because it includes all the latest drivers and kernel modules required to install new images in multiboot. Nabilosat team is about to release version 0.10 of its Black Hole image. If installed to multiboot, the new Black Hole v0.10 requires an updated image in the flash memory. For this reason, Nabilosat team prepared this Pure version for you.

How do I install Barry Allen with this image ?

Barry Allen will be automatically installed at the end of the image Setup Wizard. A console window will provide on screen installation status progress.

Will I loose the images already installed on my media ?

No, you will not loose any of your favourite images, already installed to your media. You will reboot and find them again, ready to be used.

How do I install it to flash ?

You can install it via WebInterface or via serial. However, it is important that you read the simple instructions reported here under.

Release Details

NEW Nabilosat HD bootlogo by Army.
Barry Allen 4.8.2 included
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm8000"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft"
ENIGMA2_CVS_DATE = "29 April 2009"
ENIGMA2_VERSION = "2.6 experimental"
DVB DRIVERS = "30 April 2009"
SECOND STAGE = "73-r0"
BARRY_ALLEN_VERSION = "4.8.2"


Instructions

1) Flash your DM 8000 with Web Interface or DreamUp and serial cable
2) Complete the Default Wizard to setup the basic steps
3) Upon Wizard completion, Barry Allen will automatically install
4) Wait for Barry Allen to be installed
5) When the install is complete, you must wait for the E2 to restart and new BA version will be available in the plugin MENU. Make sure to wait till E2 is restarted, as it may take some time.

Barry Allen will have been updated. You will find your previous images listed, choose your favorite as always.


Code:
http://rapidshare.com/files/228290445/Nabilo_DM8000_PureFlash_02may09.zip
 
Last edited:

vegeku90

Registered
Messages
1,586
Nabilosat Enigma2 Black Hole - DM8000 v0.10

Nabilosat Enigma2 Black Hole - DM8000 v0.10


What is new in this version 0.10 ?
Nabilosat Black Hole socket system creates a communication with Enigma 2 for the management of the EMU restart and Nabilosat API's​
EMU Management: the Black Hole Socket system allows EMU's to be run externally to Enigma2.This solution offers a better EMU performance. As an example, when you start the EMU, the spinner will not display​
Army Fantasy HD Skinintroducing the first HD skin with large size fonts and panels​
NEW EPG Panel introducing new features for the control of EPG​
Download Now reset EPG download timer and immediately start a download​
NEW EPG Provide list available in EPG main panel​
EPG settings global setting for all provider, and single provider settings​
EPG Cron for each single provider​
EPG search buttons enable/disable the epg search buttons​
Panic Button quickly zap to a fixed channel and clear zap history​
Analogue Clock: the analogue clock and gauge needles have been rewritten to offer a clear reading​
Increased Performance: all Nabilosat panel have been recoded to offer better performance​
System Pop Ups: using Nabilosat socket system now​
Extra Info Bar: new system​
Manual Install IPK: added Enigma2 console​
CCcam Info now available directly from the Green Panel (1x Green + 1x Red )​
New:
Nabilosat Black Hole System: this system represents a new approach to the communications exchange between the image core, the external environment and Enigma2. Making the image faster and more efficient.The Nabilosat Black Hole Socket allows also the following:
1) Introduction of Nabilosat Black Hole API
2) EMU and Application enhanced management, as they run externally to Enigma2
The following diagram represents the communication flow​
diagramv.gif
What are the benefits ? When you start or restart your default EMU, Enigma2 will be busy at controlling this process, until it is started and initialized. As Enigma2 is busy with this process, the spinner will display. With Nabilosat Black Hole System, when you start/restart your default EMU, Enigma2 will only send a short signal to the Socket, and this Socket will be responsible for starting the EMU. Therefore, Enigma2 is free to keep running, and the spinner will not display. Additionally, the EMU will also be more efficient as it does not depend from Enigma2.
Another benefit is represented by the possibility to send command to Enigma2 from the Linux shell, or from a schedule custom script. This system is the new Nabilosat Black Hole API.​
New:
Nabilosat API: you can now start a Telnet or SSH session and send a command to execute any of the following available API's:
- Restart EMU
- Restart E2
- Reboot DM
- Standby
- Shutdown

To launch each of the available API's, start a Telnet or SSH session, and type the following commands:

Nabilocmd restartemu
Nabilocmd restartenigma2
Nabilocmd standby
Nabilocmd reboot
Nabilocmd shutdown

Each API can also be executed manually via Telnet or SSH. It can also be included in your custom script. It can be executed automatically and regularly with the new Nabilosat Black Hole Cron Manager, at a set time, and every day.
Nabilosat API are also useful if your DM hangs. Instead of choosing to Power OFF, you can now simply restart Enigma2 or reboot using the required API.​






New:
Nabilosat Black Hole Cron Manager: you can now schedule recurring standard events ( restart e2, reboot, stand by, shutdown, restart emu ) or your custom commands, and execute them automatically. The scheduling of standard events will automatically execute Nabilosat Enigma2 API's. The custom command option gives you the option to run any script of your choice automatically and at your set time​


New
Nabilosat Black Hole EPG Panel: this new panel allows you to have full control of the EPG for the following providers
Sky IT
Sky UK
Cyfra+
Csat
Canal Digitaal
Digital+
You can now schedule an automatic download for each of these providers. You can also perform an immediate download with the new Download Now feature.
You can now enable/disable the EPG Search button, through the Gloabl Settings panel​





New
Skin Army Fantasy HD: introducing the first HD skin with large size fonts and panels​









New:
New Boot logo and Switch Off logo by Army​






New
Nabilosat Black Hole Panic Button: this new feature, if enabled, will map your 0 key to zap to the first channel of your first bouquet, and clear the history​





New
Nabilosat CCcam Switch: this plugin has been recoded for HD skin and added by default to the image​



Enigma2 CVS date
29 April 2009 2.6 experimental​
Drivers date
23 April 2009​
Second Stage #73-pr0


Main Function Keys
Button 1xOK = Light Info Skin
Button 2xOK = Extra Info Skin
Button Blue = Nabilo Blue Panel
Button 1x Blue + 1x Yellow = New System Monitor Panel
Button Blue-Long-Push = Extensions
Button Green = Nabilo Green Panel
Button Green-Long-Push = Subservices
Button Red = Start Record
Button Yellow = Time Shift​
Addons
Dedicated Addons Server
Download and install additional packages from Nabilosat server​
Infobar/OSD
Enigma2 Analogic Clock
Channel Orbital Position

Advanced Tuner Info: Sr Freq Pol Fec
Signal SNR, BER
Infobar Picons
LCD/OLED Picons
Advanced EMU information​
Nabilo Panels features

1) Blue Panel
Setup

Black Hole Cron Manager
Black Hole EPG Panel
OSD Settings
LCD Settings
Fast Plugin Settings
Inadyn Settings
Swap File Settings
Hard Disk Setup
Nabilo Mount Wizard
OpenVPN Panel
Samba/Cifs Panel
NFS Server Panel
Telnet Panel
FTP Panel​
System Monitor Panel
CCcam Info
Service Info
Enigma2 Settings
About

Memory
Space
CPU
Process​
Save
Select/Start/Restart EMU​
2) Green Panel
CCcam Info
Fast Plugin
Addons
Addons Download Manager
Manual Install Nab packages
Manual Install IPK packages
Addons Uninstall Panel
Nabilosat Statistics​
Scripts
Many thanks to the Beta Testers Team


Credits
E2 Sky Epg loader integration by MaxZ4.
Army for the new Fantasy HD skin.
Many Thanks to lukkino (VDR-Italia) for opentv source code.


This Images doesn't contain any keys nor softcams.
Backups or other modified Images are not supported!


WARNING.Nabilosat Team highly reccomends to install this image to flash. It will be perform at its best, and you will fully enjoy all the features. Else, if you install it to multiboot, you must install the Nabilosat Pure Flash DM 8000 dated 02 May 2009. Nabilosat Pure Flash DM8000 02May2009 is available here.

Code:
http://www.anonym.to/?http://rapidshare.com/files/228348824/NabiloBlackHole_DM8000_010.zip
 

k@lkov

Super VIP
Messages
10,003
Nabilosat DM8000 Pure Flash 01.07.09, Barry Allen 4.8.21

Code:
[B]What is the Nabilosat DM8000 Pure Flash?[/B]
This image is a simple, pure CVS image to install to flash memory. 
It is reccomended to those who like the multiboot option with Barry Allen. 
It is light, fast, reliable and, most of all, upated. Therefore, it is the best 
solution for multiboot purposes.

[B]What is included in this image?[/B]
This image is including the latest available edition of Barry Allen: 4.8.21. 
[B]System Plugins:[/B] Software Manager and new Network Wizard, Mount Manager

[B]Why should I install this image in flash?[/B]
Because it includes all the latest drivers and kernel modules required to 
install new images in multiboot. Nabilosat team is about to release version 
0.11 of its Black Hole image. If installed to multiboot, the new Black Hole 
v0.11 requires an updated image in the flash memory. For this reason, 
Nabilosat team prepared this Pure version for you.

[B]How do I install Barry Allen with this image?[/B]
Barry Allen will be automatically installed at the end of the image Setup Wizard. 
A console window will provide on screen installation status progress.

[B]Will I loose the images already installed on my media?[/B]
No, you will not loose any of your favourite images, already installed to 
your media. You will reboot and find them again, ready to be used.

[B]How do I install it to flash?[/B]
You can install it via WebInterface or via serial. However, it is important 
that you read the simple instructions reported here under.

[B]Release Details[/B]
NEW Nabilosat HD bootlogo by ^^MaXiMoII^^.
Barry Allen 4.8.21 included
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm800"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft"
ENIGMA2_CVS_DATE = "29 June 2009"
ENIGMA2_VERSION = "2.6 experimental"
DVB DRIVERS = "25 June 2009"
SECOND STAGE = "73-r0"
BARRY_ALLEN_VERSION = "4.8.21"

[B]Instructions[/B]
1) Flash your DM 8000 with Web Interface or DreamUp and serial cable
2) Complete the Default Wizard to setup the basic steps
3) Upon Wizard completion, Barry Allen will automatically install
4) Wait for Barry Allen to be installed
5) When the install is complete, you must wait for the E2 to restart and 
    new BA version will be available in the plugin MENU. Make sure to wait 
    till E2 is restarted, as it may take some time.

Barry Allen will have been updated. You will find your previous images listed, 
choose your favorite as always.
 

juli13

Staff member
Administrator
Messages
10,194
Nabilosat Enigma2 Black Hole - DM8000 v0.11

Nabilosat Enigma2 Black Hole - DM8000 v0.11


What is new in this version 0.11 ?


  • Army Ghost HD Skin awesome HD skin with large size fonts and panels
  • Nabilosat Black Hole Device Manager gives you full control over all your connected media: USB, CF, SD, HDD, DVD
  • Nabilosat Black Hole Kernel Modules Manager allows you to setup all the modules required by additional features and devices
  • Nabilosat Black Hole AutoCam allows you to assign a different CAM/EMU to each channel
  • NTFS support allows you to mount a device formatted to Windows NTFS
  • Smargo Phoenix & others Usb Card Readers enable your Smargo or other USB Card Readers, based on chipsets Ftdi and Pl2303
  • Virtual Keyboard is a new CVS feature enabling you to type in data through an on screen keyboard
  • Viasat EPG is now available for download
  • Subtitles White Large Fonts TXT subtitles with HD skins. Large DVB subtitles HD full size (CVS last fix)

New:
Nabilosat Black Hole Device Manager: this system will scan your DM for connected media, such as USB keys, CF, SD, HDD, DVD, and automatically identify them. Once identified, each media can be formatted, mounted and unmounted. Thus, you are no longer required to run a script or a command line to install any external memory device. Nabilosat Black Hole will handle this for you.Press 2x Blue, and select Black Hole Device Manager


  • Enigma2 CVS date
  • 29 June 2009 2.6 experimental
  • Drivers date
  • 25 June 2009
  • Second Stage #73-pr0

  • Main Function Keys
  • Button 1xOK = Light Info Skin
  • Button 2xOK = Extra Info Skin
  • Button Blue = Nabilo Blue Panel
  • Button 1x Blue + 1x Yellow = New System Monitor Panel
  • Button Blue-Long-Push = Extensions
  • Button Green = Nabilo Green Panel
  • Button Green-Long-Push = Subservices
  • Button 1x Green + 1x Red = CCcam Info
  • Button Red = Start Record
  • Button Yellow = Time Shift
  • Addons
  • Dedicated Addons Server
  • Download and install additional packages from Nabilosat server
  • Infobar/OSD
  • Enigma2 Analogic Clock
  • Channel Orbital Position
  • Advanced Tuner Info: Sr Freq Pol Fec
  • Signal SNR, BER
  • Infobar Picons
  • LCD/OLED Picons
  • Advanced EMU information
  • Nabilo Panels features

1) Blue Panel
Setup

  • Black Hole Cron Manager
  • Black Hole EPG Panel
  • OSD Settings
  • Devices Manager
  • Kernel Modules Manager
  • LCD Settings
  • Fast Plugin Settings
  • Inadyn Settings
  • Swap File Settings
  • Hard Disk Setup
  • Nabilo Mount Wizard
  • OpenVPN Panel
  • Samba/Cifs Panel
  • NFS Server Panel
  • Telnet Panel
  • FTP Panel
  • System Monitor Panel
  • CCcam Info
  • Service Info
  • Enigma2 Settings
  • About
  • Memory
  • Space
  • CPU
  • Process
  • AutoCam
  • Select EMU by Channel
2) Green Panel
  • CCcam Info
  • Fast Plugin
  • Addons
  • Addons Download Manager
  • Manual Install Nab packages
  • Manual Install IPK packages
  • Addons Uninstall Panel
  • Nabilosat Statistics
Scripts
Many thanks to the Beta Testers Team


Credits
E2 Sky Epg loader integration by MaxZ4.
Army for the new Ghost HD skin.
Many Thanks to lukkino (VDR-Italia) for opentv source code.


This Images doesn't contain any keys nor softcams.
Backups or other modified Images are not supported!



WARNING.
Nabilosat Team highly reccomends to install this image to flash. It will be perform at its best, and you will fully enjoy all the features. Else, if you install it to multiboot, you must install the Nabilosat Pure Flash DM 8000 dated 01 July 2009. Nabilosat Pure Flash DM8000 01 July 2009 is available here.


Download here 52 MB
Code:
http://rapidshare.com/files/251450453/NabiloBlackHole_DM8000_011.zip


Alternativ Link
Code:
http://rapidshare.com/files/251468348/NabiloBlackHole_DM8000_011.zip
 
Last edited:

tani1

Staff member
Super Moderator
Messages
17,767
Nabilosat Enigma2 Black Hole - DM8000 v0.12

Nabilosat Enigma2 Black Hole - DM8000 v0.12


What is new in this version 0.12 ?

- Army Ghost HD Skin awesome HD skin with large size fonts and panels

- Nabilosat Black Hole External EPG download your favourite EPG data file from your community server

- Nabilosat Black Hole EPG for Mediaset channels is now fixed. The correct event name will be be displaye instead of "Visibile in analogico e digitale terrestre"

- Satellite.xml updated file by Reinh@rd


New:

- Nabilosat Black Hole External EPG: This image version will introduce the option to download EPG data from a web server, and apply it to your DM without restarting Enigma2.
- Therefore, each board or community can create its favourite EPG data files, and upload it to a web space. Community members can then download it from that server.

- This feature offers additional benefits, such as:
- EPG download increased speed
- EPG download from any channel
- EPG scheduled download also during standby
- User set EPG Providers Add/Remove
- Read more about this feature, in this thread

New

- Army Ghost HD: awesome HD skin with large size fonts and panels

New:

- New Boot logo by Army

Enigma2 CVS date

- 13th of October 2009

Drivers date

- 16th of October 2009

Second Stage #76

Main Function Keys

- Button 1xOK = Light Info Skin
- Button 2xOK = Extra Info Skin
- Button Blue = Nabilo Blue Panel
- Button 1x Blue + 1x Yellow = New System Monitor Panel
- Button Blue-Long-Push = Extensions
- Button Green = Nabilo Green Panel
- Button Green-Long-Push = Subservices
- Button 1x Green + 1x Red = CCcam Info
- Button Red = Start Record
- Button Yellow = Time Shift

Addons

- Dedicated Addons Server
- Download and install additional packages from Nabilosat server

Infobar/OSD
- Enigma2 Analogic Clock
- Channel Orbital Position

- Advanced Tuner Info: Sr Freq Pol Fec
- Signal SNR, BER
- Infobar Picons
- LCD/OLED Picons
- Advanced EMU information

Nabilo Panels features

1) Blue Panel

Setup

- Black Hole Cron Manager
- Black Hole EPG Panel
- OSD Settings
- Devices Manager
- Kernel Modules Manager
- LCD Settings
- Fast Plugin Settings
- Inadyn Settings
- Swap File Settings
- Hard Disk Setup
- Nabilo Mount Wizard
- OpenVPN Panel
- Samba/Cifs Panel
- NFS Server Panel
- Telnet Panel
- FTP Panel

System Monitor Panel

- CCcam Info
- Service Info
- Enigma2 Settings
- About

- Memory
- Space
- CPU
- Process

AutoCam

- Select EMU by Channel

2) Green Panel

- CCcam Info
- Fast Plugin
- Addons


- Addons Download Manager
- Manual Install Nab packages
- Manual Install IPK packages
- Addons Uninstall Panel
- Nabilosat Statistics

Scripts

- Many thanks to the Beta Testers Team.
- Many Thanks also to Munja,zupy,cronicus,shame,alen5555,escalibur for betatesting.
- Many thanks to ^^MaXiMoII^^ for hosting the current EPG data, and to all Satmate boys for their support.



Credits
- E2 Sky Epg loader integration by MaxZ4.
- Matrix10 for the new XLite HD skin.
- Many Thanks to lukkino (VDR-Italia) for opentv source code.
- Many thanks to Reinh@rd for the satellites.xml file.

This Images doesn't contain any keys nor softcams.
Backups or other modified Images are not supported!


WARNING.

Nabilosat Team reccomends to install this image to flash. It will be perform at its best, and you will fully enjoy all the features. .

Thanks to Nabilo Team!!!
 

elgeneral

Registered
Messages
7,811
Nabilosat DM8000 Pure Flash Multiboot 12NOV2009, MeoBoot 0.6

Nabilosat DM8000 Pure Flash Multiboot 12NOV2009, MeoBoot 0.6

What is the Nabilosat DM8000 Pure Flash Multiboot ?
This image is a simple, pure CVS image to install to flash memory. It is recommended to those who like the multiboot option with the new Nabilosat plugin MeoBoot. It is light, fast, reliable and, most of all, upated. Therefore, it is the best solution for multiboot purposes.
What is included in this image ?
This image is including the first public edition of MeoBoot: 0.6. System Plugins: Software Manager, Network Wizard, Mount Manager
Why should I install this image in flash ?
Images installed to multiboot require the flash image be updated with the latest drivers and second stage. This Pure Flash Multiboot image includes the current drivers and second stage. And these can also be updated at any time via the Software Manager. Therefore, you can always have an updated flash image.
How do I install MeoBoot with this image ?
MeoBoot is included by default, and can be launched via the Plugins Menu. Please scroll down for further details.
Will I loose the images already installed on my media ?
Nabilosat Team higly recommends to completely remove any previous installation of other multiboot tools. These are incompatible with MeoBoot and may cause malfunctions.It will be best to format the device. MeoBoot plugin includes a tool to format the device used for multiboot purposes. Therefore, for this first installation of MeoBoot, the answer is: Yes, you will loose any previous image already installed to multiboot with other tools. However, once you install images to multiboot with MeoBoot, these will be retained by any future update.
How do I install it to flash ?
You can install it via WebInterface or via serial.
Release Details
MeoBoot 0.6 included
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm8000"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft"
KERNEL VERSION: "2.6.12-5.1"
DVB DRIVERS = "06 November 2009"
SECOND STAGE = "76-r0"
MeoBoot = "0.6"

NEW Nabilosat HD bootlogo by ^^MaXiMoII^^.
bootlogo.jpg




About MeoBoot

What is MeoBoot:
MeoBoot is a new, very light, not invasive, Multiboot tool for Enigma 2 images.
MeoBoot is the answer to those who wish to have an alternative to the existing multiboot tools, which have now become a kind of image in the image, controlling your DM, doing tasks that go beyond their purposes, reaching large file sizes.

System requirements:
MeoBoot is currently designed to work only with Enigma 2 images for Drembox series DM8xx, namely for dm800 and DM8000.
MeoBoot can be installed on a standard CF (Compact Flash), an SD card, or a normal USB key.
MeoBoot only accepts devices formatted in Linux (part1) and this to ensure the best performance in dreambox native environment.
The HDD install option is not available. The HDD standby feature makes the HDD install a bad solution, and therefore the USB, CF and SD are preferred instead.

Operation:
MeoBoot is very simple and intuitive. The plugin includes an Help button, explaining where to upload images before install and how to remove it. It also includes a feature to format the device where the MultiBoot will be used.


About multiboot tools, and suggestions on how to keep the image always updated.

An insight of all multiboot tools would require understanding that DMM second stage are not possible to modify.

This means that the current multiboot tools may intervene in the process of starting the Dreambox only after the kernel and Secondstage have been loaded.
It is therefore importanto to understand that when using a multi-boot tool, the drivers, secondstage and kernel will be loaded by the flash image.
This procedure requires some precautions:
1) It is a good idea to always update the flash image, to make sure it includes the latest drivers and secondstage. Drivers and Secondstage can be easily updated via the Software Manager, available in the flash image. If the drivers and secondstage of your flash image are old, they will also be used for the new images you will install to multiboot.
2) Do not install to multiboot images too old, compared to the flash image. They may not work properly when the drivers are very recent, and the CVS is very old.
3) Do not use images in multiboot with different kernel versions. This may cause the malfunction of your whole dream.
For example, do not use the latest OzOon images with Nabilo, LS, Gimini or NewEnigma. Ozoon latest images include a different kernel and are incompatible.
To avoid trouble then before installing a new image, always check the image kernel version, and make sure it is the same as the flash image.
These are few and simple explanations that are relevant to all multi-boot tools and if you follow them, you will then make sure that your Dream always performs at itsbest, keeping it as much as possible efficient and updated.

MeoBoot was written precisely for this to be simple, transparent and lightweight.
It is very small compared to other MB and does not reach even a mega.
It only does its job, and does not invade your dream, do not check if it is a clone or not, check your network, it does nothing extra. Only does multiboot!

Enjoy MeoBoot :)


Install the Pure Flash Multiboot to flash via browser and boot it.

shot1.jpg

Complete the Start Wizard as you wish, and open the Plugin Menu

shot02.jpg

Select MeoBoot, and press OK to launch the plugin

shot03.jpg

The plugin will automatically detect the available devices ( CF, USB or SD )

shot04.jpg

If necessary, press the Green Button ( Devices ) to format your chosen device. Press the Red Button ( Format ) to start formatting the device

shot05.jpg

Confirm you wish to format

shot06c.jpg

Wait for the format procedure to be completed

shot07.jpg

When the format procedure is complete, press Ok and you will be redirected to the Plugin Menu.Press the Red Button to install it to the selected device


Confirm your choice


Meoboot is now successfully installed to your device


After installation, you will return to the Plugins list. Launch MeoBoot again.


You will see the list of available images. In this case we only have the flash image. Press the Blue Button for Help, the Green Button to boot the selected image, and press the Red Button to install a new image to multiboot. Image files must be first uploaded to the the folder /MbootUpload, which is in your chosen media. Select the image with the left/right button

Change name if you wish


Choose if you wish to copy settings or not. And press the Red Button to start the image installation.


The DM will freeze during this procedure. Wait a few minutes, for the install process to be completed. Once the install is complete, you will be prompted with the Boot Menu, where you can choose to boot the newly installed image, or any other image already installed.


The plugin will have also been added to any image installed to multiboot. You can install other multiboot images from a multiboot image too.


Enjoy Nabilosat images :)

 
Top